Źródło oznaczyło ten model jako treść 18+.
Wydruk około 8,43 €–10,30 € nettoWstępna wycena jednego wariantu
- Pobrania
- 669
- Polubienia
- 203
- Ocena
- 5
122 modeli
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 8,43 €–10,30 € nettoWstępna wycena jednego wariantu
I am a huge Dragonball fan. I made these Dragon Ball keychains, I was a little undecided as to how I wanted my keychain, so I did some testing. I asked my friends which was the coolest to publish it, but they all had different opinions,…
MY SETTINGS FOR THIS PRINT: -Nozzle 0,40mm -Filament 1,75mm -Layer 0,08mm -Infill 5% -Walls 2 *PRINT THIS MODEL UPSIDE DOWN
Remixed the previous model, adding a base to make it easily printable, and colored it to support bambu printers
This was in my ta do list and a request a couple of months back from a drop box link. But the file was just called helmet, so unfortunatley I cant recall whom it was or what it is supposed to be called. If you do recognise this helmet let…
I remixed this model from https://www.thingiverse.com/thing:2272830 by https://www.thingiverse.com/Cronos-FDM The first few renders have additional detail not captured in the 3D models The PCB is more simple than the renders The words on…
Printed it with black PETG and the organic support. Works good. The whole bust is approx. 13cm high but it can also be resized if needed.
Goku Dragonball I film what 3D printing actually earns me, including what uploading models like this one pays: watch the video . More of my projects: kirimas.com
Hi guys. I made a bust from the model of gabrieel22 (https://sketchfab.com/3d-models/goku-ssj4-9bab9434206c45fa8830f2ffcfe2ea8a). I reccomend to print it in resin. If you like, please press it :D
I drew the logo for the series Dragonball/ Dragonball Z and equipped it with an illustration. The logo can be scaled. I have scaled it on the MK3 to 170% in X and Y. The letters should be printed individually. It takes some patience,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Just a simple Bookend with Dragonball Design.
Two ultimate rivals of the Dragonball anime series. Can be printed as a single piece or separate if plate size doesn't allow to print it.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. 100% infill Start with Black At layer #12 (1.04mm) swap to Blue At layer #15 (1.28mm) swap to Orange At layer #21 (1.76mm) swap to Jade White for the rest.
Remixed another of ortizimo's creations to better suit what I was after. 20mm thick Z to sit up next to a DBZ Pop Vinyl collection. Black backing is inlaid with the Red/Orange parts. Print settings shouldn't matter again with this one…
Dragon ball Z wall art Leave a comment of your suggestion Category: 2D Art
Dragonball Z Fusion Bookends Remixed the Dragonball Z Fusion book ends that diegoozanan created on Thingiverse. Designed a mounting base and new stand for the characters, they now screw to the base and/or stand using M3 countersunk…
A static pose of Goku transformed into a Super Saiyan from the Dragon Ball series. Enjoy!
Ozaru, the giant ape into which the Saiyans transform.
those who love Dragonball will appreciate it
Feito para fãns de DragonBall Z.
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu White…
Dragon ball Z wall art Leave a comment of your suggestion Category: 2D Art
Dragon Ball Z wall art Leave a comment of your suggestion Category: 2D Art
Perfect for 42mm Dragonballs
Dragon ball Z wall art Leave a comment of your suggestion Category: 2D Art
Dragon Ball Z wall art Leave a comment of your suggestion Category: 2D Art
Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #6 (0.56mm) swap to…
This is a Dragonball holder/display I made to show off a Dragonball set. Great as a table display, in the office, game setup, etc. It works with various size Dragonballs but I made it specifically to best fit the Toei Animation Official…
Dragonball Z Logo EN - Thank you for liking my model. I just ask that you follow me, nothing more, thank you and I will do the same. PT - Obrigada pelo o like no meu modelo Eu só peço para me seguirem nada mais obrigada e eu farei o…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. 100% infill Start with Black At layer #11 (0.96mm) swap to Blue At layer #15 (1.28mm) swap to Red At layer #20 (1.68mm) swap to Jade White for the rest.
Simply use the pause and change trick or a MMU.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. 100% infill Start with Black At layer #9 (0.8mm) swap to Blue At layer #15 (1.28mm) swap to Orange At layer #22 (1.84mm) swap to Jade White for the rest.
Ho creato grazie alla IA un porta incenso originale a tema Dragonball, basta stampare così com'è successivamente togliere il bastoncino e fare un piccolo foro per inserire il bastoncino di incenso
These parts were made up for some custom action figures. We used other action figures as a base for these new 3D printed parts. These parts should be printed in resin for best detail.
🐉 Dragonball – Son Goku – Figure 001 Bring one of the most iconic anime heroes to your collection with this Son Goku figure! This model is a great display piece for Dragon Ball and anime fans and looks fantastic on a desk, shelf, gaming…
just some 2d logos if you have any questions just ask, you can also propose me more ideas to make If you found this useful, please donate what you think it is worth to my Paypal me. ([email protected]) Help cover the time of design.…
Show your love for Dragonball Z with this wall art of King Kai's kanji! I always liked this symbol and was surprised to not see a printable one available, so here we go! Story behind the symbol: “The 2nd symbol on Goku’s Gi is one given…
dragonball Hero (whose name I do not dare to write here due to copyright) inspired Clock Printing: print in your favorite color combination. don't forget to set a color change for the numbers you can use the original clock hands or the…
Simple drink coaster with Super Saiyan Logo. Works best if you attach a piece of felt underneath. I think it looks best when printed on the textured build plate to give it that extra shine. Feel free to tinker:…
Circular painting modeled with Fusion360 to hang or display
Dragon ball Z wall art Leave a comment of your suggestion Category: 2D Art
This is a remix, inspired by the designs (thingiverse) of Lalala65765 and a bit of Salvador Richter. I reworked the solid dragon egg and redesigned it into an egg cup with a ragged edge. The green is also painted.
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Green Transmission Distance:…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Ginew, the leader of the group of 5 mercenaries of the Special Forces of Frieza's Army, from the Dragon Ball Z series.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #13 (1.12mm) swap to…
Master Roshi from the Dragon Ball series.
Arte 2D Personalizable - Collage de Iconos de Anime Presentamos un increíble arte 2D que combina icónicos elementos de varios animes populares, ideal para impresión en 3D con dos colores: fondo blanco y relieve negro. Este diseño es…
⚡ Majin Vegeta – Final Battle | Battle Damaged Figure The Prince of all Saiyans – wounded, exhausted, but still standing. ⚡🔥 This Majin Vegeta figure captures one of the most intense versions of the legendary Saiyan warrior. The model…
This is one of my first Designs of an Swordart of Dragonball Z. This ist the Daemon-Sword of Dabura. Hope you will like this. Thx for Rating and Sharing
I designed these coasters inspired by the seven dragon spheres. On the top of the lid is the KameHouse symbol. They are designed to be printed in one go with BambuLab's AMS, in case you don't have the possibility and want to print colour…
Simply pause and swap or use an AMS/MMU
Easy to Print 220mm x 220mm, 2mm thick. For multi extruder printer, split into parts then select the parts for the second colour (first part in normally the base colour layer, all other parts are normally the top colour layer)
Dragonball Ziffernblatt mit einem Durchmesser von 23cm. Das Loch in der Mitte beträgt 8mm. Getestet wurde dieses Model mit einem FDM Drucker (BambuLab X1Carbon). Stützen sind nicht erforderlich. Viel Spaß beim Drucken.
Dragon ball z stylized box to hold your various things...
Design Concept This keychain features a silhouette design inspired by the iconic hair shape of Goku from Dragonball. Using a minimalist style, it focuses on easily recognizable characteristics, making it both stylish and functional.…
Have fun needs support made on tronxy colored by the Kindergarden !! PLEASE SEE also the other Stuff made by the Students Artclass
let me know how it turns out please still getting use to this :')
Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #10 (0.88mm) swap to…
Bonjour, C'est un de mes premiers modèle issus de Fusion360 que je fais en phase d'apprentissage. Etant fan de Dragon Ball, j'ai conçu ce logo de cet univers qui m'avait fait tant rêver. Faites vous plaisir ^^! Print Settings Printer…
Ho realizzato questa stampa in onore di uno dei miei manga preferiti, di seguito le istruzioni per stamparla con o senza AMS. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab…
Lightbox DBZ ball 4 star and gohan Need change color, or AMS ERCF or MMU of Prusa
Show everyone around you that you're a fan of DBZ by printing this. The face plate will be snapped into the button's base to hide the thread behind it. Button diameter is 22mm
Design Concept The keychain is designed with the emblematic Capsule Corporation logo from the popular anime Dragonball, serving as a nostalgic accessory for fans. Usage This keychain is perfect for personal use or as a gift for anime…
🐉🔥 WallArt – Son Goku Dragonball Bring the legendary world of Dragon Ball to your wall with this powerful Son Goku WallArt! The design features Goku with his unmistakable spiky Saiyan hair, intense expression and strong geometric…
Design Concept The design takes inspiration from a popular concept, featuring a simple yet iconic four-star pattern embedded in a round disc. Its compact nature is enhanced with a convenient chain attachment for portability. Purpose Ideal…
Goku DragonBall Z Decor. Hard print! 20% infill, 2 walls, support enabled
DragonBall Lithophanes set 3
Vegeta DragonBall Z Decor. Hard print! 20% infill, 2 walls, support enabled
No supports required, as there is a disposable support integrated in the file already. I've added a touch of thickness and made the choker slit deeper since the photos of the print were taken.
Design Concept The keychain is designed with the iconic Dragon Ball Z logo, highlighting bold lines and vivid colors to make it a standout accessory for any fan. Use This keychain can be used to hold keys or as a decorative accessory,…
Tampa do suporte do spooler Dragonball Z SonGoku Kamehame IberGoku Prusa Core One +
Beerus DragonBall Z Decor. Hard print! 20% infill, 2 walls, support enabled
Elevate Your Space with the Power of Dragon Ball! Introducing the 3D Dragon Ball Logo, an exclusive piece for the true Dragon Ball fans of saga. Precision-crafted through 3D printing, this logo is not just a decorative item but a symbol…
Design Concept This keychain features a stylized rendition of a well-known character's head from the Dragonball series, designed for fans who appreciate subtle nerdy design while remaining stylish and functional. Purpose Primarily used as…
DragonBall Lithophanes set 1
Needed a wall mount for my dragonball star spheres. figured someone should have made but couldn't find one. So I made one. I just used PLA but you can use whatever you want. Just to get the best strength. Please use 100% infill. Enjoy if…
🔥⚡ WallArt – Dragonball Vegeta Bring the legendary Prince of all Saiyans to your wall! This WallArt is inspired by Vegeta from Dragon Ball and captures his unmistakable strength, determination and warrior spirit in a powerful artistic…
Buu DragonBall Z Decor. Hard print! 20% infill, 2 walls, support enabled
Use two colors for best results. Set includes +5k, +6k, +10k, dual attack, double strike, and dragonballs for once per battle activation tracking.
Diamond-shaped painting modeled with Fusion360 ideal for hanging on a wall with holes to put a rope
Design Concept The keychain is inspired by the iconic Majin symbol from the Dragonball series, creatively integrated into a friendly design suitable for any fan. Purpose It serves as a functional keychain while showcasing your passion for…
DragonBall Lithophanes set 4
Broly DragonBall Z Decor. Hard print! 20% infill, 2 walls, support enabled
Cell DragonBall Z Decor. Hard print! 20% infill, 2 walls, support enabled
DragonBall Lithophanes set-2
Pen with Goku on it The pen's ink cartridge is a standard Bic pen. All my Pen Design: check out this collection https://www.printables.com/@Lele88/collections/1119783
Pen with Goku on it The pen's ink cartridge is a standard Bic pen. All my Pen Design: check out this collection https://www.printables.com/@Lele88/collections/1119783
Tampa do suporte do spooler Dragonball Z Dragao IberGoku Prusa Core One +
Tampa do suporte do spooler Dragonball Z Nuvem e Bastao para fio IberGoku Prusa Core One +
Beerus DragonBall Z Decor. Hard print! 20% infill, 2 walls, support enabled
Pen with Goku on it The pen's ink cartridge is a standard Bic pen. All my Pen Design: check out this collection https://www.printables.com/@Lele88/collections/1119783