105 modeli
Human skull model created by direct conversion from CT scans. A world famous doctor (and our good friend) actively working in the field of surgery provided us with her skull for study purposes. The model is created by conversion from CT…
Wydruk około 22,74 €–27,79 € nettoWstępna wycena jednego wariantu
The Complete set of files to 3D print your own Moon Landing 50th Anniversary edition Big Back Open DSKY. Print instructions Print 1 of each file. Use Galaxy Silver and Galaxy Black PLA Prusament for best results.
Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu
Advent wreath Simply plug them together and put 1 flame on each advent. Have fun ! Advendskranz Einfach zusammenstecken und an jedem Advent 1 Flamme draufstecken. Viel Spaß !
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
The Complete set of files to 3D print your own Moon Landing 50th Anniversary edition Slim Open DSKY. Print instructions Print 1 of each file. Use Galaxy Silver and Galaxy Black PLA Prusament for best results.
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Krabička pro tyto karty(tisk+laminování): http://kartyprotilidskosti.wz.cz/karty_proti_lidskosti_20.pdf Print instructions Tištěno na MK3s na nastavení 0,2mm quality
Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu
Top of Open DSKY used in Slim and Big Back versions. Print instructions Easy print. We use Galaxy Silver PLA Prusament.
Wydruk około 5,83 €–7,13 € nettoWstępna wycena jednego wariantu
Adaptor between all Open DSKY top and Big Back prints. Print instructions Galaxy Silver PLA Prusament.
Wydruk około 12,83 €–15,68 € nettoWstępna wycena jednego wariantu
Inner Bezel that fits directly on top of Open DSKY PCB to create lower layer (bottom bread) of sandwich with Outer Bezel (as top bread) capturing the Laser Color printed lampfield and acrylic window. Print instructions Galaxy Silver PLA…
Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu
Outer Bezel for Open DSKY Slim and Big Back versions. Print instructions We use Galaxy Silver PLA Prusament.
Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu
Bottom with center battery box for Big back Open DSKY. Print instructions Galaxy Black PLA Prusament.
Wydruk około 14,63 €–17,88 € nettoWstępna wycena jednego wariantu
Battery door used for Open DSKY Slim and Big back versions. Print instructions Print with Galaxy Black PLA Prusament.
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Ring that goes on top of Big Back Bottom to connect to Big Back Middle section of Open DSKY. Print instructions Galaxy Black PLA Prusament
Wydruk około 4,31 €–5,27 € nettoWstępna wycena jednego wariantu
Mid section for the Big Back Open DSKY Print instructions Galaxy Black PLA Prusament
Wydruk około 16,28 €–19,90 € nettoWstępna wycena jednego wariantu
Mid Ring to snap unto Open DSKY Big Back Mid section. Interfaces with Big back adapter. Print instructions Glaxy Black PLA Prusament
Wydruk około 6,25 €–7,64 € nettoWstępna wycena jednego wariantu
Slim Bottom for Open DSKY Print instructions Print with Galaxy Black PLA Prusament.
Wydruk około 7,76 €–9,48 € nettoWstępna wycena jednego wariantu
Middle section of Open DSKY used in Slim and Big Back versions. Print instructions We use Galaxy Silver PLA Prusament at 0.15. Little bit of support recommended for the tabs.
Wydruk około 12,68 €–15,50 € nettoWstępna wycena jednego wariantu
Mudskipper
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Holds any plate/cup/bowl or other object on the table. Objects <25 mm thick can be stored in the side compartment. I use it for phones, remotes, chargers and snacks. Made two of these for my IKEA LANDSKRONA couch, however it should fit…
of course it's a yeti paw, bon appetit samozřejmě že to je stopa yettiho, dobrou chuť
This project is designed to build a working model of the Display Keyboard (DSKY) portion of the Apollo Guidance Computer. The model utilizes 3D printed parts and 2 LCD screens along with a Raspberry Pi and 3 Arduinos. The DSKY will be…
THIS IS A WORK IN PROGRESS - ALL STLs ARE COMPLETE AND FIT, BUT SOFTWARE IS INCOMPLETE. [UPDATE 29/06/2024 - BOM Updated as I'd marked the PI3 mounting hardware as M3, when it's M2.5 and the Pico as M2.5 when it's M2. Added schematics for…
Godskin Peeler from Elden Ring
ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16(0.15)mm or 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall generator: Classic Detect thin walls: - Brim: No! BuildPlate: - Info‼: Do not scale the Mudskipper any…
model of bust of Józef Piłsudski
The case files were designed by https://www.twitter.com/DSK001_3D for the January 2021 UFO Project to use an ESP32 Camera. Additional files added as the nuts fit better for me printed at 110%, which also required longer bolts and a…
Washington Redskins Retro Oversized Necklace Logo that I designed. I hope you enjoy!
Tento model slouží jako perfektní nástroj pro vzdělávací demonstrace ve třídách nebo jako umělecká prezentace v domácnostech či ateliérech.
Dobré ráno, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás Lidskou lebku, jako dekoraci pro Halloween. Hodi se i jako pomucka na biologii. Velikost si upravte dle libosti. Pokud vás moje práce zaujala, odkazy jsou zde:…
This is my take on creating the on board computer panel from Apollo 11. I created it for an exhibition we are showing for the anniversary of the moon landing. Print instructions I have made mine with some OHP film as "windows" on the…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
A printable model of Högalidskyrkan, one of the most prominent churches in Stockholm, Sweden, built in 1923 (so it just celebrated a hundred years). It was designed by Ivar Tengbom in national romantic architectural style. This model has…
Dreh-Verschluss für den Verbandskastendeckel. Audi A4 B6
Brdská vločka Dlouho se nevědělo, kdo je jejím autorem, ale měl by to být spisovatel a výtvarník Jan Čáka. Má podobu směrové růžice, kdy světové strany ukazují smrkové větvičky. Diagonálně jsou pak větvičky listnaté, protože listnatých…
printed with supports .
None of the existing mounts fitted my Handskit 927 soldering iron, so I did what any self respecting maker would do and designed my own!
This is a remix of Vector3d's VLMP soldering iron holder. I found the basic holder kept pushing the soldering iron out of the holder when I applied downward pressure. This adds adjustable screws to increase the tension. You will need the…
Open DSKY - bflores Modified I ordered the electronics from S&T GeoTronics LLC ( https://opendsky.com/ ) via this link: https://opendsky.backerkit.com/hosted\_preorders I paid $500 + $30 shipping for the "Open DSKY Complete Kit" A big…
Józef Piłsudski statue bust Scanned by me from existing sculpture. Back of the model was not scanned so could be improved. See my other Statues here: https://www.printables.com/@StudioMechanik/collections/2993601
1:400 model of the Belgrade gate in Novi Sad part of the Petrovaradin fortress. I made this model in my Architecture representation class and remade it for the 3d printing. The model was siting on my shelf for a while so it lost a couple…
The Houndskull Bascinet was a special type of helmet used in the late Middle Ages, particularly in the 14th and 15th centuries. This innovative head armor was distinguished by its characteristic shape, which was reminiscent of a dog's…
I designed the map from a birds eye view screenshot of the map, and scetched it out in Fusion 360. It is one of my first models, so feel free to come with any constructive critizism or feedback for changes in the model!
Advends Stern Viel Spaß !
Ahoj, rád bych sem přidal logo našeho národního plemena tj. Chodského psa. Jedná se o jeden z mých prvních modelů, proto budu rád za objektivní zpětnou vazbu. Model se dá použít jako jednoduché logo, v případě zájmu model doplním i o…
Vytvořil jsem model hospodského panáka 4cl. Dva modely, model a klasický panák. Klasický lze tisknout jako model a plný se používá jako reverzní pro vytvoření díry do jiného modelu na vložení panáka a nebo se může vytisknout jako panák s…
IKEA Water TAP Bottom Ring LUNDSKÄR. Print instructions Printet with ABS.
This is just some more parts for bglasford1's Functional DSKY. https://www.printables.com/model/272162-functioning-dsky Alternative keycaps for the Functional DSKY model. The trick is to print them as 0.16mm layer height. Make sure that…
Vykrajovátko na těsto ve tvaru skautské lilie s volitelným razítkem ve tvaru chodského psa.
this is a lithophane of one of the all time GREAT Washington Redskins, John Riggins #44. in this historic photo, Washington was faced with a 4th and long situation in the late minutes of Super Bowl 17. down 17-13 in the 4th QTR, Riggins…
My wife broke her hand Lol! This is a repair piece for Ikea's wooden hand model "handskalad" This was made to repair the thumb joint where it connects to the palm but the other finger joints look similar so it may work for them as well. I…
A mini dude designed to look like me by the wonderful @Wekster and @The3DPrinting to celebrate my Birthday! THANK YOU VEDRAN AND FRED!!
This helps espresso grounds go into the desired receptacle.
Drumstick holder. Snaps onto the leg of the AODSK AED-400 electronic drum kit, or anything with a 38.2mm leg diameter. 200mm tall. Printed on MK3S+ with Prusament Galaxy Black ASA. 0.2mm layers, 10% infill, no rafts/supports
A Shredskin. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Creatures
This stand combines with a Handskalad from Ikea to provide a unique solution for storage and display.
This .3MF file is completely free to download, print, and use however you see fit. There is no paywall, membership, or hidden charge. Once you download the file, it is yours to enjoy. Print it for yourself, give it as a gift, customize…
The metal tray for my soldering station stand was very rusted and looks awful. So I designed a replacement one in Fusion 360. Printed in ABS and it fits perfect. Print Settings Printer Brand: Anycubic Printer: i3 Mega Rafts: No Supports:…
As I found myself in need of an upgrade from the standard edition. I created this upgrade, for better cooling and accessibility. I've directed the Wifi module on the top, for the best reception. The original display can be just peeled and…
The model might be bigger than any mudskipper you may encounter in the real world.
This is specifically made for the green organic waste baskets used in Copenhagen (so noone will ever download and use them). I use them to mount the basket to the inside of the door below the sink. There are two versions, one with a…
Spare part for Cylinda freezer.
My settings: Layer 0.4mm Infill 100% Ill be happy if you share your print and rate it in the comment section :)
Small simple mount for hand scalad without support. First attached to the position where you want it and then the handscalade is inserted and can still be rotated before it is attached with two screws. It is best to pre-drill the holes…
I made this functionality expander for the Jysk Abildskov movie-theater style couch to increase functionality of the built in cupholders. It just slots into original location, and can hold multiple things, sauces for your chip dipping…
Vyhodil jsem obkladače a dlažbu jsem si dělal sám. Tohle je malá pomůcka, jak zajistit, že dlažba bude vždy posunutá o stejnou délku. Berte to jen pro inspiraci.
Krabička je vytvorená na Švédske karty s mincami
Wall mounting holder for Elpumps DSK-10 flow control switch. Probably good for the AL-KO DSK10 as well. First install the DSK-10 in the holder, then mount the pipes. The top part is secured by a zip-tie. Print Settings Printer Brand:…
This key punctured the pocket of my jeans, so I wanted to 3D print a simple sheath. Nothing fancy, it protects my pocket. This is the specific key:…
buzzer mount BEYONDSKY 7 inch frame or others with 25mm width holes https://youtu.be/HFuLS_cYZcg
GPS 181 mount BEYONDSKY 7 inch frame or others with 25mm width holes https://youtu.be/HFuLS_cYZcg
Pair of brackets suitable for a OX tools speedskim
Verleihe deinen Wänden einen Hauch von klassischer Eleganz und moderner Kunst! Diese detailreiche Wandskulptur stellt einen kraftvollen Widder im majestätischen Barock-Stil dar. Die geschwungenen Hörner und eleganten Ornamente…
Key Cap Tops (Non-Illuminated) for Apollo DSKY (AGC Display / Keyboard). Adjusted KeyCaps tops using GortonDigital font. They fit the original keycap bases. Ideally suitable for resisn printing. Will not give good results otherwise. I…
Krytka na příslušenství k převodovce Vari DSK-316
Template for led lite on 155mm cutout to SDK. Šablona pro vyřezání otvoru pro led svítidlo 155mm do SDK
Anti-Scratch Pads for Sega Dreamcast CD area Reproduction of the original soft pads inside the Dreamcast lid to prevent disc scratching. Thickness : 0.5 mm Quantity per console : 2 pieces Can be made by : – 3D printing in TPU – Laser…
Edited original battery holder for a smaller capacity batteries.
Simple remix, I don't know what else to say other than thank you Dsk001 for the original upload, you saved me lots of time :) <3
This great organizer can hold AA and AAA battery's, push pins, pens, markers and pencils.
EN : Created quickly using the 3D Box Generator due to an urgent need... ( https://javisperez.github.io/box-stl-generator/ ). With filament changes at the 5th and 7th layers (0.3 mm) > 2-colour printing without an MMU Material : PLA Layer…
PLA worked fine on my car. I set my car's ride height to 24mm in the front and 26mm in the rear. With the kit perches you won't be able to get nearly that low without cutting springs, which changes the rate and is hard to do exactly the…
Please like follow and post your makes I really like the Advent wreath - Advendskranz by AA . Please go get their model and print it first. AA published this model 3 years ago and it's still a banger! Then come see these additions that…
With your permission, here is a "remix" of the standard, bland case for the T12 soldering station. Everything possible has been simplified. The "top" part now serves as the main structural element, while the bottom plate acts as the…
We got ourselves an IKEA BONDSKÄRET , which we like very much. However, we did not find a good place for it without wasting a lot of space. To be able to put it into a corner, I designed this extra foot. Warning: the extra foot is far…
When I go wild ice skating on lakes and fjords, there's always a bit of safety gear you carry along. To also carry two separate skates is just annoying, so I made this 3D printable holder. Carry by the handle and just drop the skates in…
the GREAT face of a GOD join our discord at https://discord.gg/h2jpKcGD4R first drawn by the guy who draw it Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
Studentky oboru Praktická sestra, vytvořily jednotlivé obratle lidské páteře.
Divider for a cleaning cabinet tray. Don't know the model name, because everything that is sold, sold brandless. The latches are press-fit onto the divider.
Lost yours too?
When I go wild ice skating on lakes and fjords, there's always a bit of safety gear you carry along. To also carry two separate skates is just annoying, so I made this 3D printable holder. Carry by the handle and just drop the skates in…
Key Cap Tops (Non-Illuminated) for Apollo DSKY (AGC Display / Keyboard). Adjusted KeyCaps tops using GortonDigital font. They fit the original keycap bases. Ideally suitable for resisn printing. Will not give good results otherwise. I…
I made this functionality expander for the Jysk Abildskov movie-theater style couch to increase functionality of the built in cupholders. It just slots into original location, and can hold multiple things, sauces for your chip dipping…
