351 modeli
DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
A simple stand for the (now old) Dualshock3 controllers from the PS3 era. I kept tolerances on the larger side, so it is more forgiving regarding exact placement on the stand for the price of a looser fit. I have only checked controller…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
English Simple mount for dual shock or PS4 controllers to put under your gaming desk, or your coffe table. It uses its joysticks as a holding points. Used to hold one controler at a time. To be hones Iam not sure if this may damage the…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
My first 3d modelling attempt/modification, I printed with supports to baseplate which may or may not be needed. The screw is from https://www.thingiverse.com/thing:2076034 - I attached the short one just for practicality sake but it's…
Wydruk około 2,63 €–3,21 € nettoWstępna wycena jednego wariantu
Here are the settings I've used on my Ender 3 with Prusa Slic3r: 0.16 layer height - makes it stronger and nicer; organic support material for the hooks - you could also use grid, doesn't change much; grid infill 15% - any pattern could…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Česky: Držák na stěnu pro ovladač Dualsense na Playstation 5 s možností vložení nabíjecího…
Wydruk około 2,77 €–3,39 € nettoWstępna wycena jednego wariantu
A simple, yet curvy, dualshock stand. Includes a slot to route a charging cable. Printed mine in pistachio PETG with 2 perimeters and 25 % gyroid infill, but as its overbuilt it can be made with practically any material and reasonable…
Wydruk około 8,67 €–10,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed a controller stand featuring the Playstation button symbols with a minimalized footprint. It is recommended to print the model as shown in the photo with supports.
Wydruk około 3,00 €–3,67 € nettoWstępna wycena jednego wariantu
Experimenting with using a PS5 Dualsense controller as a steeringwheel for driving-games. Model uses my snapon mount for the controller, you might need to add something between controller and mount to add extra friction so that the…
Wydruk około 7,31 €–8,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mounting hardware for range extender of DualShock 4 controller with universal DS4 zip-tie attachment. The long range capability can be done adding RC joystick module from https://github.com/ctu-vras/rcjoy . System is fully see-through and…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a wall mount for the PS3 DualShock controller. I have modified the controller mount, so it's fits the wall mount. Go see the original designers of the wall mount back ground and the controller mount. Back ground wall mount:…
Wydruk około 2,97 €–3,63 € nettoWstępna wycena jednego wariantu
This adapter allows a high-capacity battery, such as f.e. Li-Poly 4000 mAh, to be connected to a DualShock 4 controller. The high-capacity battery provides extended gameplay for several days. Since the battery cannot fit inside the…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Inspired by agepbiz's Xbox Minimalist Controller Stand(https://www.printables.com/model/449970-minimalistic-xbox-controller-stand), and not being able to find one for the PS5, I decided to learn some new skills and create my own. I have…
I redesigned the v2 version to be more rounded and sleek. Product Introduction: Hello everyone! I'm excited to share with you my 3D printed stand design for the PS5 controller. This stand is perfect for storing and displaying your PS5…
Super simple model that I made by hacking together two other models from Thingiverse namely this PS5 controller stand and this Skadis hook . Aside from bodging the two together in Tinkercad I flattened the sides so that the model can…
New version here: https://www.printables.com/model/1840378-ps5-dualsense-controller-phone-mount-bigger-strong This a remix of https://www.printables.com/model/148212-dualsense-simple-phonemount I wanted to be adjustable according to the…
Snap this onto your DualSense and you've got an all-right controller! The thumbstick is controller by moving the whole controller. Rest the controller on your lap or the table, and move it around. Its motions are transmitted to the…
Single-handedly the best DualShock adapter! The thumbstick is controller by moving the whole controller. Rest the controller on your lap or the table, and move it around. Its motions are transmitted to the thumbstick. There is a 4-to-1…
You inspired me to Add the Playstation brand. THX @Hazzardness https://www.printables.com/de/@Hazzardness_250785
For those who want to make commercial use of the printed parts, access the link below to find the 3D model licensed for commercial use and more complete editable files. PS5 Dualsense Stand for Comercial Use + Step File I made this support…
100% inspired by the Switch Pro controller by npiegdon ( https://www.thingiverse.com/thing:3030629 ). Thanks to davec54's 3D scan, I have improved upon the original version of this stand. Now the thing fits like a glove. It's quite a bit…
A little experiment with mounting my mobile phone (OP8T with bumper case) to a PS5 Dualsense controller using a simple snap-on mount. Borrowed the profile for the snap-on part from https://www.thingiverse.com/thing:4668566 . Included are…
A remix of kiwithreed's design from Thingiverse . Modified the following: Removed headphone holder. Simplified the design so it prints with drastically less filament. 3M Command Strip (Medium) compatible. Recommended print settings (.3mf…
Updated to V3. I added the pegs from my SNES Skadis mount that I designed from scratch that adds a third centered peg underneath the top 2 for extra support. It should feel much more secure.…
Playstation 5 Controller Stand narrow version 50mm wide version 55mm Supports: Doesn't Matter Resolution: 0.16 Infill: 20% Filament: NoName PLA White Notes: narrow version 50mm wide version 55mm Update 20.12.2022 Ich habe eine Multicolor…
video about project: [v 1.0] The project is currently in the alpha phase. I'm sharing the model for the finger, thumb, and wrist stabilizer, which can be molded to fit the wrist shape by heating it with a hairdryer or heat gun. To adjust…
I have a project: make a perfect PS5 controller holder. For that I need one thing: the 3D of the controller! It is complex and requires only one technique to obtain it accurately: the scanner. So I bought a scanner and reworked the…
3D Scan of the Sony Dualshock 4 Game Controller
I'm glad to introduce the PS5's controller stand that I created. Nice design and perfect fit, this is what I wanted for this stand. To achieve this, I scanned the actual playstation 5 controller very accurately : DualSense PS5 Controller…
A universal smartphone mount for DUALSHOCK 4 (PS4 controller) I made Any modern smartphone can be held securely using a screw mechanism fully printed needs support structures The joints can be attached with 1.75 filament
Created via modification of original 'dualshock 4' design by Saba.Lanchava found on his sketchfab page ( https://sketchfab.com/Saba.Lanchava ). All support & credit should be directed towards the orignial designer Saba I simply deleted…
PS5 DualSense Controller Stand
Remix of the " PS4 Controller Stand ". I wanted a more stable base so changed the rounded front. The one I printed has the icon at top, but I made a version where the icon is centered. The one I printed also got a rounded slope on top,…
Remixed. I simply added the PS5 Logo via Tinkercad. Printed with my now retired Anycubic in white PLA, brother in law loved it. Full credit goes to odbo on thingiverse, it's a remix of his plain charging station !
One of the triggers was broken on my PS4 controller, and I decided to 3D model some new ones instead of replacing them with generic replacements. These are flat replacement L2 and R2 buttons for the first gen PS4 controller (CUH-ZCT1).…
Inspired by a design from Nicholas Piegdon: https://www.youtube.com/watch?v=8qTx_9HK7IM Used 3D scans from: https://bitbuilt.net/forums/index.php?threads/ps2-dual-shock-2-controller-scan.5088/
Remixed Original one for 2 controllers
Two sided and keyhole versions available. A modified version of the Xbox controller wall mount . For best strength and quality, print sideways. Dualsense PS5 Xbox (One + Series X/S) Xbox Elite Series 2 (Coming soon, premium)
I took Hazzardness design and carved out some space for extra buttons on the edge controller; both back button types will fit with the design.
100% inspired by the Switch Pro controller by npiegdon ( https://www.thingiverse.com/thing:3030629 ) and remix made by JeffChen ( https://www.printables.com/model/152515-ps5-dualsense-controller-stand ). This version allows you to use 2…
This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…
Simple wall mount for Dualshock 4 controller. uses only one screw as I was hesitant to drill more than required. Turns out that one screw is more than enough. Step and Fusion 360 files available for you to modify! Support You can support…
The creator of this model didn't include the STL files for printing, so I converted them in Fusion360 and here they are.
A stand for two ps5 controllers. This model is a remix from a model for one controller from La Guía del Mando (can't reference it as it has since been either switched to draft or has been deleted). I did a few modifications such as…
playstation 5 dualsense controller wall mount
Onimask PS5 DualSense Controller Stand
Support for remote play with your phone directly on the controller. Fits phones from 71mm to 105mm in width. The tightening screws use an M7*1.0 thread I suggest you glue some rubber (in my case pieces of the rubber band) so that the…
it's just a scan, not optimized for printing
One of my first projects is this PS3 controller stand with the function of storing your UBS cable as well… Eines meiner ersten Projekte ist dieser Ständer für PS3 Controller mit dem sich auch das USB Kabel verstauen lässt…
This is a re-make of Thingiverse user Stridershouse's design. I redesigned it to have no logos, have a smaller footprint, and to mount with command strips or any other adhesive-based solution instead of using screws. There is a…
I recommend to print this standing on one surface at the Bottom like one of the pictures show. It might work best if the inner gap is facing upwards. I printed mine on an Ender 3 S1 with - Fillamentum Wizards Voodoo PLA - 210°C - 0,08mm…
Remix of this model https://www.thingiverse.com/thing:4694896 to store two controls and a headset
Stick protection for PS5 Dualsense, ideal when traveling and just want to toss the controller in the bag Placed on the side with just chamfers it doesn't need supports ! --------------------------- Use of PETG is recomended to get the…
Just another holder for dualsense and headset. I wanted one that clips directly to the PS5, so I combined several models found on Thingiverse so the main one is https://www.thingiverse.com/thing:4705298 Just print it on the side without…
Easy to print Honeycomb Storage Wall add-on for holding the PS5 Dualsense Controller. No support needed. I added a model with a PS Logo. Remix of a Remix. Remix by Maikeru…
i didn't try too print the smaller PS5 Dualsense Controller smaller_closer so it maybe dos not work
My first publish. I'm a huge fan of God of War and wanted a stand for my PS5 controller. The other stand didn't print right so i made my own that stands out more.
still waiting for my PS5 so cant test. Based off multiple designs and dimensions I have found. Hoping I can condense the design but not sure on the controller to wall clearance. Any pictures and help would be appreciated! Print Settings…
Tento model jsem si vypůjčil a upravil aby byl pevnější a na telefony co mám . iPhone 8 + kryt ( š - 79,7 mm) iPhone 8 bez krytu ( š - 69,3 mm) Brzo dodám aj na rozměr iPhone 8 Plus a iPhone XR . Možno se pokusím udělat i nějakej…
My first shared 3D model. I wanted some more accuracy playing Helldivers 2, so I tried several existing thumbsticks, that are available online, but didn't like them. So I ended up creating my own. Printed in standart PLA, top in different…
I made this support inspired by the design of ps5, for the fitting I took the exact measurements of the control and tested it. In the last photo you can see the recommended slice position. I recommend using 0.2 layer height or lower
Stand or Wallmounted Ständer oder Wandhalter
Edit: Updated to V2, V1 had a chance to start drooping down after awhile. Designed a PS5 Dualsense Charging Station wall mount as i couldn't get one without paying exorbitant amount of money for shipping from the USA. Got some inspiration…
This is a no-glue no-supports removable joystick to hold between your index fingers and thumbs.
My first legitimate attempt at 3D modeling (in fusion260 community, DM me for the .f3z). I made this for my friend who has a dualsense edge controller. This controller is less compatible with most controller holders because they don't…
Remix of @PrimeRetroGamer Stand that supports two controllers instead of just one.
I made this because I love the PS5 and the logo is so beautiful so I have to add it. There are no limits to your color wishes have fun and I look forward to seeing your prints THX @ https://www.printables.com/de/@Igoravg98_264355 you…
This remix was posted with authorization from the creator of the original scan, Xile6. If you would like a much higher-quality scan of the DualSense faceplate (this mod uses 5% of the original's polygons) that doesn't use any notches,…
Most popular minimalistic PS5 DualSense Controller Stand with Gridfinity base 2x4. I love the design of the stand, and didn’t see a Gridfinity version of it… So DJ willchill in the house with his own remix! For those Xbox or Switch…
These are flat replacement L1 and R1 buttons for the first gen PS4 controller (CUH-ZCT1). The buttons are not modeled to be exact replacements, they are flat and chamfered on the front, both as I wanted something that was a bit nicer to…
PS5 DualSense controller holder for Ikea Skadis panel. More vertical variant of @zenzmatz_213590 holder
PS5 DualSense Controller Stand
This is a printable case for your DualSense PS5 Controller. There are two files, one can be printed on a minimum Build plate of 210 mm x 250 mm, This will be printed in one piece. The other files can be separated and printed one at a…
Basicaly an overengineered PS4 controller stand Derived from a 3D scan - https://www.printables.com/model/125924-sony-dualshock-4-3d-scan/remixes - Thank you I provided a full stand file so the optimised one can be used as a mesh modifier…
Gridfinity Stand for Dual Shock (PS4) Controller like https://www.printables.com/de/model/708470-gridfinity-ps5-duals or https://www.printables.com/de/model/708458-gridfinity-minimalistic-xbox-controller-stand
Printed in eSun PLA+ at 0.16mm layer height. I always have 0 layer interfaces and top z distance as 0.3mm to correspond to layer height. 14 hours and about 200 grams with 10% gyroidal infill. Very stable with good weight Tree support used…
This is a USB cable guard for Sony PlayStation 5 DualSense that clips onto the controller. It is designed to hold original PlayStation 5 USB Type C cable firmly when it's connected to the DualSense. This removes strain from USB port and…
made this for my son to play with come nice together if the 2 disc is printet in propper tolerances ITS A REMIX OF www.thingiverse.com/thing:3882003 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…
Wall mountable PS4 DualShock controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) This has 2 pieces that must be printed and…
Soporte doble de PS5
⚠ Commercial Use Notice: If you intend to sell physical prints of this model, please purchase the licensed version here: 👉 Buy the commercial license on Etsy 🔒 License Terms: This model is for personal use only. Commercial use (including…
This is a USB cable guard for Sony PlayStation Dualshock 4 that clips onto the controller. It is designed to hold original PlayStation 4 microUSB cable firmly when it's connected to Dualshock 4. This removes strain from microUSB port and…
PS5 DualSense Controller Stand
I printed these in “draft” mode, 0.2mm layer height, and 20% infill, on an Anycubic Vyper with support. Print the nut and bolt from the Xbox One version, as it does not need to be modified. The paddles were modified from the Xbox One…
(PS4) Playstation 4 dual shock controller holder for honeycomb wall with gamging sign on front of the holder. Slight modification of model which i cant find right now.
PS5 DualSense Controller Stand
Fixed the height of the original. The part which is mounted to the wall (with double sided tape) was slightly shorter than the part that holds the controller making it harder to print. Original by Beebles (…
PS5 DualSense Controller – 1:1 3D Scan This is a 3D scan of the PS5 DualSense controller intended as a reference for CAD projects. Use it to design a stand, wall mount, charging dock, storage insert or another accessory that fits the…
hiho, alle 18V ProCore Akku-Halter Modelle die ich gefunden hatte, haben leider gar nicht gepasst oder nur unausreichend. Ich habe dieses von Grund auf neu konstruiert und iterativ angepasst. Print settings: PETG 30% infill 3-4 Layers /…
I designed a GTA VI Dualsense Controller Stand for your Playstation controller.
2 diferent modules Remixed from a screw holder
This is a travel case designed to fit a PS5 Dualsense Controller. The outer shell pieces and hinge can be printed out of any plastic of your choice. The inner case parts hould be printed in TPU or other flexible filament options (I used…
PETG recommended, no support required. Update V2: Fixed an issue where the hook would pop out when lifting the controller.
Remixed base block from this https://www.printables.com/model/479716-ps5-dualsense-controller-phone-mount
I remixed my PS Portal Sticklocks to fit a dualsense Controller, cause i found the small form factor handy.
If your PS5 DualSense thumbstick cover is worn or torn, this replacement cap is an easy solution. It snaps securely onto the existing knob, restoring the functionality and feel without replacing the entire thumbstick. Print Details: Layer…
Saehriminir's PS5 Dualsense Hidden IKEA Skadis Mount remix Multiboard
A minimalistic cover that protects your analog sticks. It goes over the track pad and, using a nub, snaps in place over the headphone jack. See Gif for usage. Works well for my use case of tossing the controller into my backpack. Use at…
Mount for console controllers that has a ball-end that works with RAM mount arms . 2 sizes available. the ps4 version is a kitbash of Akaki's mount piece, so it is a bit of a mess, but works.
I liked mwolson's controller stand and printed a bunch for all my controllers and they are great. For a PS Dualshock or Dualsense, I just had to widen it to 70mm and the stands were great. However, the Dualsense Edge has the bottom…
![[Remix] Notched DualSense Controller Faceplate](https://media.printables.com/media/prints/1012330/images/7694595_bedd3f61-5183-4a11-a9c8-f0f318f582a1_809cb393-9e02-4056-ba76-01e7cc07a431/pxl_20240919_014400529.jpg)
