16 modeli
fedelcode type 1 model i made, going off reference photos of Newport, DE , Columbus, GA , Youngstown, NY fedelcode type 1 sirens. going off The siren wiki, the rotors are 9" wide, and using this info, imagemeter gave measurements for…
Using same rotor, stator, and motor mount. New housing and legs.
HARDWARE: unknown amount - M3 by 10 screws 3x - M4 by 10 screws 1x - M4 eyebolt 1x - 8 to 8mm shaft coupler (14 by 25mm) (link below) 8x - 3/16 x 1-1/4 fender washers (Hillman H# 885521) (link below) 1x - OH SUNG microwave blower motor (a…
Basically every Fedelcode Models. Fedelcode Mach will be seperated from the Models. Very simple, Works with H/O scale.
Entire thing glues together, please use a 130 motor. About 1:8ths scale. Mine uses a different, smaller unknown motor. But I made it compatible with a 130 for all of you.
info for all models: supports enabled 5%+ infill
This is the first fully 3d printable Fedelcode mach 10 on printables (as of now)!!! This siren is fully 3d printable with any printer with a build space atleast 256mm squared! This model is easily built following the diagram, but if you…
heres my discord server where you can find up coming projects https://discord.gg/NSbvM7QBmx shout out to miles peterson for the core and that the housing was made by me heres the hardware you need 130 motor…
Finally, a new siren model! this can be printed in 9/9, 12/12, or 9/12 This model (potential) uses a Samsung DE31-00029H
This uses these solenoids https://www.amazon.com/dp/B0B4DFJTHX?ref=ppx_pop_mob_ap_share
These are mini models of the fedelcode Model 2,3, and 5 I would recommend printing with a 0.2mm nozzle. I hope you enjoy this model. :D
Using same rotor, stator, and motor mount. New housing and legs.
HARDWARE: unknown amount - M3 by 10 screws 3x - M4 by 10 screws 1x - M4 eyebolt 1x - 8 to 8mm shaft coupler (14 by 25mm) (link below) 8x - 3/16 x 1-1/4 fender washers (Hillman H# 885521) (link below) 1x - OH SUNG microwave blower motor (a…
This is the first fully 3d printable Fedelcode mach 10 on printables (as of now)!!! This siren is fully 3d printable with any printer with a build space atleast 256mm squared! This model is easily built following the diagram, but if you…
