Baby Groot Flowerpot
Layer 0.30 mm, filling 25%, brown PLA painted with acrylic markers, supports on the printing pad
- Pobrania
- 10 161
- Polubienia
- 1657
- Ocena
- 4,94
498 modeli
Layer 0.30 mm, filling 25%, brown PLA painted with acrylic markers, supports on the printing pad
Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor. Just glue the head with the body and enjoy it!
This is a large flower pot with drainage holes and a saucer. There is also a coaster on which the pot is elevated so that more water can drain from the pot to prevent root rot. The plates are equipped with a catch so that the pot is…
Inner plant pots in various dimensions: easy to print and no support needed The pot in the pictures is d95-D140-H115 and is printed in PLA. If you need other dimensions you can scale the model or feel free to leave a commment - there will…
simple easter decoration
Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor.
Can be printed with vase mode. I recomend use some coating when you print it with vase mode. (for example hair spray) PETG or PLA nozzle 0.4mm extrusion widht 0.8 or waterproof pot in vase mode
Hi, A part of my wavy collection, this plant pot is a clean and minimalist way to present your succulents and small plants. Best printed out of petg or other watertight material. This is an outer pot without drainage holes, meant to be…
Shiny, reflective or translucent materials enhance the look significatnly. Although my prints are water tight, I don't recommend using without inner flowerpot. Print in “vase mode” with 0.8 mm nozzle, 0.3 mm layer height, PETG. Scale to…
3D-Scan of a beautiful flowerpot bust with an ancient greek/roman motive. Best prints with tree support.
“Experience the beauty of nature held gently in the embrace of art. This unique flowerpot, designed with two sculpted hands, symbolizes care, harmony, and a deep connection to the natural world. Let your favorite plants thrive in this…
Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor.
Just a late night project that I did to get a little better in onshape. The version that I printed was at 60% size, which is why some details don't really show. Hope it gives your flowers the additional touch, they might have needed…
Illuminated stand for a statuette or flower. Used RGB tape. Easy to print. Two series of diodes used. Cut and soldered. Problem: Used cheap RGB tape - short power cable. When the wireless receiver is inside the stand, the signal range is…
Print Settings Material: Spectrum - Rust Copper Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before wipe: 0 This is…
Ivysaur Flowerpot This is a remix of this Bulbasaur pot created by Openjuy . I made it for my friend who wants to enlarge his family of adorable Bulbasaurs pots. The design has not been tested yet, however it should be printed in one…
Flowerpots/Planters to fit between the rails of our balcony railings. OpenSCAD file is included so you can easily make it fit yours! There are two variants of the pot (measures in mm ): a smaller one that fits between two rails:…
Layer 0.20 mm, filling 25%, white PETG painted with acrylic markers, supports on the printing pad.
This flowerpot was designed for growing of little herbs directly on your fridges. Dimensions 50x45x28 Used magnet dia.10 _5mm
Hi :) This is one of my vase mode plant pots. As part of my WAVY collection this is a very elegant way to present your plants. Find a fitting saucer, I use yoghurt cups that i cut up. For the sizing, this worked for me: if you have a 15…
How to change parameters? Model in the picture is printed in 0.32mm layer height. Seam position is aligned back . → because flowerpot is static object and no once will take it in hands and rotate it….sporadically. If you download f3d…
Just an easy remix of rubberduck, to make it fit some flowers, like cactus or tillandsia. It also has a excess water outlet in its butt. Some support to its beak is recommended…
Easter decoration for your flowers
A simple flowerpot in the shape of a sphere cut on both sides. This is a remix of my other model, differing in the shape of the outer decorative wall.
Slime statue flowerpot I made for my bonsai tree. I printed this one scaled to 120 %. Supports are recommended for the top part of the mouth (organic supports worked best for me). The plort should hold inside without glue. I printed mine…
I printed everything in PLA but every other material should also be okay. hope you like the model, give me your feedback in the comments. best regards mlax
Hi ! There is a little something I designed for my girlfriend's office, I thought I could share it with you all ! Interior dimensions : 13cm width and 12 cm for the height of the hole. I recommend a 0.8mm nozzle and a line widht of 1mm,…
Little decoration for flowerpots. For design changes there is .step file. Flower that will survive your behave. Water not needed. Bloom all the time in a year. Print Settings Rafts: No Supports: No Category: Decor
Hanging flowerpot for small overhanging flowers with integrated base. Flowerpot is 60 mm in diameter. No supports are required. Waterproof when printed with generic PLA, 0.15 mm layer and 0.4 mm nozzle.
Print it with your normal settings.
Tested on a 0.15mm layer height and 0.4 nozzle and vase mode. Other settings can easily be used and scaling in the slicer will work like a charm. Step file included for remixes !
There are two versions of the model in the archive/ В архиве есть две версии модели. Printed on Flying bear 1s/Напечатано на Flying bear 1s Material/ материал: PLA or ABS Layer height/высота слоя: 0.2 Nozzle diameter/сопло: 0.4 My boosty:…
Wenn Sie nicht selbst drucken möchten, können Sie auch direkt auf meinem Etsy-Shop bestellen: https://designdruckbymd.etsy.com/de/listing/1679554200/blumentopf-6cm-3d-gedruckt-arches
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 Seam Position: Aligned For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before…
Spring decoration for your flowers
DE: Ein Untersetzer für Blumentöpfe in verschiedensten Größen. EN: A coaster for planters in different sizes.
Internal dimensions are: 80 mm bottom 100 mm top 75 mm depth
I stumbled about that Whale Tealight Holder, and found that to be ideal for a planter pot if the potpart would be a tad bigger. So i edited this in Tinkercad, and thats what came out of this! Print instructions Category: Containers Print…
A simple ball-shaped pot with decorative round holes. While creating it, I was inspired a bit by a golf ball. The model consists of two walls connected at the top and bottom: the inner pot, and the outer one, which has a decorative…
A handy coil and base for your new best 2m antenna A bit of a description is here Please tweak and optimise. Be careful with whatever you sleeve the co-ax for RF absorption. Even some fairly simple stuff like fibreglass will have some…
Inner Diameter: 132mm Outer Diameter: 160mm Heigth: 140mm Printed with Prusament PLA Blend Viva La Bronze
If you have size requirement, let me know and i will do it. Flowerpot with Knurling texture, which is used on gun grip. Need 35 metres of filament. Printed from Prusament PETG Jet Black. If you print it, let me know in comments.
As I am one of the person, who always forget to water the flower or plant, I designed simple selfwatering flowerpot for my chilli plants. Print instructions I recommend printing it from PETG to have it watertight. Printable on Prusa MINI…
a cute smile flowerpot that you can resize as you like. happy printing! printed 0,24mm 2 perimetres
Simple flowerpot. Well, maybe not very simple, but it has an interesting shape. The photo shows a PETG print, 0.3 mm layer. It was test print, therefore the quality is poor. I suggest you print with a 0.2 layer. The flowerpot consists of…
Remixed it for my daughter to be used as toy in a small kitchen I just create a brand new lid and add hole. Original was much bigger than mine. Can be printed without any support.
Hello guys. It's a simple flowerpot with a drain. It can be used for different kinds of plants. I suggest you put some small stones on the stand before planting anything. Hope you like it. :) Update: As someone mentioned - I added the…
Flowerpot and tray inspired by the unique sunny houses in Szeged. (In Hungarian: "Napsugaras ház") Unfortunately, there are fewer and fewer of them, they will perish or disappear. From the rectangular opening depicting the eye of god, the…
Print set. PLA/PET-G Nozzle: 0.4 mm Layer: 0.2 mm Infill: 5-10 % Support: NO Speed: 40 mms (EN) Design flower pot for home and outdoor cultivation. It can be optionally enlarged or reduced. Be sure to upload print photos. (CZ) Designový…
flower pot with leaves design dimensions: diameter 100mm height 100mm
Small flowerpot - size about 40x40x42mm - with drainage. Coaster optional. Looks best printed with fuzzy skin on outside walls. 15 flowerpots will fit in this plantcoaster 0.4 nozzle, 0.3 layer height, no supports, ~9 gram filament for…
Hello guys. For few months I am trying to grow succulents and other plants. Many pots there don't have any drain, so I've created one by myself. The pot consists of 2 parts as shown in the pictures. Don't forget to add small stones on the…
Hi :) This is one of my vase mode plant pots. As part of my LINES collection this is a very elegant way to present your plants. Find a fitting saucer, I use yoghurt cups that i cut up. For the sizing, this worked for me: if you have a 15…
Hello folks. The pot consists of 3 elements - the main part, the big and small roof. All parts are super easy to assemble, you don't need any glue - just a little push. The project has a pretty effective drain so you won't flood your…
Maceta sus medidas son 16 centimetros de diametro y 15 centimetros de altura. Flowerpot measures 16 centimeters in diameter and 15 centimeters in height
A simple geometric flowerpot that can be printed in vase mode. I made it basically so I can put in practice a particular design technique with OpenScad (twisted extrusion). You can use the highly customizable script to create your own…
Flowerpot - PLA !!!! FOR RESIZE - POD MUST BY RESIZED FOR FLOR POD !!!! PLA NO SUPPORT INFIL 10-20% Post-Printing Category: Decor
Chinese dragon flowerpot
A simple Planter with or without Holes. 100 mm height Top: 128 mm ⌀* Bottom: 120 mm ⌀* *Diameter for long axis of the hexagon.
Inner Diameter: 90 mm Outer Diameter: 110 mm Heigth: 100 mm The middle and the large version are available at Printables as well. Large: https://www.printables.com/de/model/354099-flowerpot-low-poly-large Middle:…
My wife want it toe easter. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0.3 Infill: 20 Category: Decor
Outside diameter: 125mm Height: 15mm Thickness: 2mm / 1,2mm
Hi :) This is one of my vase mode plant pots. As part of my LINES collection this is a very elegant way to present your plants. Find a fitting saucer, I use yoghurt cups that i cut up. For the sizing, this worked for me: if you have a 15…
Is it a vase? Is it a flowerpot? That depends on you. I recommend printing them in vase mode because it will be done quite quickly and will consume a small amount of filament. EVERY G-CODE IS IN VASE MODE!
I created these Plant Pot Spacer Rings to tackle a common problem: stagnant moisture building up at the roots of plants in flower pots. After noticing some of my favourite houseplants struggling with soggy soil, I designed these rings to…
Flowerpot with pyramidal patern internal dimensions: diameter bottom 80mm diameter top 100mm height 75mm
Happy flowerpot with painted hearts and face
Azure Axolotl flowerpot plant
Decorative flower pot from the game Counter Strike. I was looking for an original decoration for the house and I found a model of the map DE_DUST. I thought I would improve it even more to create a beautiful decoration for the house.…
A simple flowerpot in the shape of a sphere truncated at the bottom and top. Additionally, it has 3 legs to improve stability. Everything is so simple that it couldn't be easier :-)
Next thing which you will need: pump R385 Čerpadlo 6-12VDC, 1-3l/min R385 | GM electronic, spol. s.r.o. switch for example: Kolébkový spínač černý I-O, 2 pólový, ON-OFF, 15A/250V RS-201 4C3 | GM electronic, spol. s.r.o. any power supply…
Hello, Welcome to my profile, full of models and miniatures :-) I have Block, Brick, LEGO Flowerpot, Vase for you. It prints really well. You need to use supports! If you are interested in my work, the links are here:…
The vase scales easily and can be printed in various sizes. In the pictures, we see it in sizes of 120mm and 240mm. Happy printing.
My wife wanted some kind of wallmounted flowerpot. Printed from PETG. 20% infill 3 perimeters Overhang Support 15% I created a little tool to help me drill holes. I drilled holes with 5mm drill bit. Screws are from IKEA.
Flower pot for small flowers. You can water the flower at the bottom from outside. So you don't have to water the plant directly and it gets water indirectly.
Hi :) This is one of my vase mode plant pots. As part of my ZigZag collection this is a very elegant way to present your plants. Find a fitting saucer, I use yoghurt cups that i cut up. For the sizing, this worked for me: if you have a 15…
Often it can be hard to water your cactus without spilling water. This flowerpot is the solution. The opening on the top has a diameter of: 120mm (pictures, stl, g-code) 100mm (g-code) 80mm (g-code) 60mm (g-code) Like and Follow for more
leave a like and a download if you like it :D hehe
This design is intended for Flowers that have been in a pod with roughly the following dimensions: radius: 70mm; hight 140mm. I wanted to hang the flower as seen in one of the Pictures which is why i integrated irrigation so I don't drown…
flowerpot stand diameter 150 mm height 21 mm
2 files one is Flowerpot and the other one is minifigure
This beauty flowerpot was designed by SUNLU for 3D printing users. You can plant flowers or other plants in it. If you want to 3D a strong flowerpot like this, you can use SUNLU PLA and ABS filament
You can print it in any scale you need
A beautiful minimalist painting of a Daffodil in a flowerpot on the wall or with a stand on the table. Size 175 x 200 mm You can find the small print stand for the table on my profile ↓…
Celebrating the legalisation of cannabis in Germany: This is a flowerpot with weed leaves on two sides, 102mm high, 108mm wide. I printed it in PLA in white (generic) and black (Prusa Galaxy Black) with a green leaf in Filamentum PLA…
Flower pot with wavy patern External diameter 10 cm Height 8 cm
Designed to hold 5 of those Mini-Cactus with about 54mm top-diameter and Fit exactly on the 210x250mm Printingsurface of Prusai3 Mk2. Also includes drainage and water-outlet on front. Uploaded V2 with little edge-cuts on the back side,…
Bowl under the pot - Miska pod květináč