280 modeli
2023.01.28 EDIT: I have uploaded millimeter based .OBJ files under “Armskore Coil Gun Pistol V2” and added a better stand for the prop under “Baseplate Assembly V2 Slim” folder. I designed all parts to be as 3d printable as possible with…
Wydruk około 4,80 €–5,86 € nettoWstępna wycena jednego wariantu
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Alternative top infill pattern: Archimedean Chords Low speed and high temperature will create a shiny top surface. There are "holes"…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
UPDATE 11/14/2023 added nemmie and henry and gave some sub text UPDATE 10/1/2022: added octoberfest mugs and did some sorting creator notes: I am still working on this and I get very busy with work irl so please be patient. I have since…
Here you have another large 80cm filament print of a robot. This one is based on the Cylon character “Centurion” from the Battlestar Galactica movies and series aired in the 70ies & 80ies of the last century. The original 3D model was…
This is a remix of www.thingiverse.com/thing:5140166 I separated the handel from the mug to allow for the multi colors I wanted to do. I also filled in the center to make a 12oz soda/beer can fit nice and snug. ROCK AND STONE!!! Print…
This is the logo for the Galactic Empire from Star Wars. I've included 4 models: Standard Logo Logo with background Logo with angled sides Angled logo with background As always, I am open to suggestions on how to improve my designs, so…
Based off concept art from @gc_conceptart this is an envisioning of the classic Galactic Armory logo with a Halo Spartan helmet! The faceplate is able to be removed with the help of 10mm x 3mm circular magnets. Includes both assembled and…
Don't you hate the way most coasters don't catch the condensation coming off your ice-cold drink? Well, this coaster is just what you need! A beautiful coaster that will protect your coffee-table or desk while you watch Battlestar…
First, congratulations to Nigel Buckle, David Turczi, and the Mindclash team for this incredible game. It checks all of my big, heavy, space game boxes for both solo and co-op play. This insert took my brain by storm. The game trayz do a…
I couldn't find a Battlestar Galactica model from the new series on Printables, so I thought I would bring them to you from Thingiverse. I printed this great model from EDY209 on Thingiverse a while back. I also used the fixed parts by…
This is a rip of DRG source models, with the canister tanks filled for printability. I've included the source obj files in case you want to play around with positioning. If you plan on printing this, I suggest using 3D Builder or a…
IMPORTANT: A few people in the comments have mentioned that Mood made some changes to the trays in the second edition release. These organizers will sadly only fit in the v1 deluxe version of the game. First time upload, first time using…
I couldn't believe that I couldn't find a Cylon Raider from the original series (TOS) on Printables, so I had to add this one from newtrix on Thingiverse. His is a remix of Astrofossil's design also on Thingiverse. Newtrix split the…
I took BlueFalon1066's remix of SeafoamFabrication's model of Deep Rock Galactic 's Buff Beer Mug. I split the handle into two pieces for easier printing and included pegs to keep them aligned when gluing them in place. I also scaled up…
Battlestar Galactica Colonial Raptor. I couldn't find any models out there, so I took one from the game Diaspora. I extracted the model from the game, chose the highest detail mesh, converted it to stl and fixed the surface problems in…
Galactic credit from Star Wars for cosplaying and/or use to play Sabacc. I resized the files and remade the bronze and gold credit to match better with the silver credit. I made them for my personal use to play Sabacc. I printed them in…
This is a project to build a Sabacc game set. Think of it like a Star Wars version of poker set. Sabacc is a card game in the Star Wars universe. This card game is available for purchase in Disney's Galaxy's Edge theme park or at various…
This is the logo for the Galactic Republic from Star Wars (1-3). I've included 4 models: Standard Logo (will print as separated meshes!) Logo Inverted Logo with background Logo with hole for keychains As always, I am open to suggestions…
I really enjoyed working on this model of the galactic starcruiser Halcyon. I made it as a Christmas present for my father-in-law who recently went on one of the last voyages before the experience closed at Disney World. I added a lot of…
As a special request to Straeker. I did all that I could as far as my abilities go. I've split it up in such away that there should be no need for supports although there is a couple of pieces that will need a little. I saved all the…
This is a model of the beer mug used for “buffing” beers such as Pots O' Gold, from the video game Deep Rock Galactic. It's sized to fit a 355mm/12oz can precisely. The color scheme in the photos and file uses the color scheme from Pots…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, skill, and CAFFEINE! ;-) And then check out my other models for…
A model of the flare from Deep Rock Galactic. The model has several components that can be printed in different colours. I have a full sized model with empty space inside to fit LED lights and a solid, smaller version for use as a…
Made some 3d pipes for the Deep Rock Galactic Boardgame for the Extraction mission type. Including pumpjacks and a refinery piece who connect to the hight of the pipes. Printed mine in resin at 25 degree angle and ultra supports. Some…
Cylon Raider : Battlestar Galactica 2004 Series bio-mechanical life form . While it resembles a sleek, "Cylon-head" shaped spacecraft, it actually possesses a biological brain, organs, and even blood, allowing it to "resurrect" into a new…
I loved Battlestar Galactica as a kid and I found this cool model over at the STL Finder https://www.stlfinder.com/model/1970s-battlestar-galactica-cylon-centurian-helmet/5612916 I've modified it a little to best represent how I thought…
Bring iconic sci-fi history to your workbench with this massive 20.5" x 10.5" (52 cm x 27 cm) replica of the Battlestar Galactica Viper Mark II! Truly an impressive showcase piece, this model captures the aggressive lines, triple-engine…
Al Mon has a beautiful Viper MkI on Printables with 45 files. It is an awesome model. But, not everyone wants to build with that many pieces. I couldn't find a simpler one here, so I uploaded DavidBogearts two piece model from…
Remake of Deep Rock Galactic - M.U.L.E by Salynrad. Added base. You can try without support (I didn't) but beware there's small gap between figure and base Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter…
Slowly getting back and tidyng up my original files, Cheers Jace
These are pickaxe parts from Deep Rock Galactic. I plan on adding more if I can, later. Some of the parts have collisions with other parts, that can be removed, so that the pieces fit together. They also have color, so hopefully that's…
Changes: Top: added a bridge (support) under the lamp. Originally, it was held up only by two thin pillars. Bottom: added several bridges inside legs. Originally, the armor was barely connected to the main part of the leg. And both models…
Logo de Star Wars correspondiente al imperio galactico Star Wars logo corresponding to the galactic empire
A very big thanks to TBone for having created this model in Pepakura, Check out the link http://53rdfac.proboards.com/thread/969/galactic-marine-pepakura You can also down load this and other pepakura models from TBone9600's link below…
Iconic Imperial TIE Fighter with twin solar panels and spherical cockpit from classic Star Wars sci-fi.
Here's my take on the original series Cylon centurion from Battle star. I't been split with Luban and the eye scanner piece goes from the inside and pushes out The mouth guard just glue in place I made the small holes in the forehead that…
I made mine out of out of PETG. (I had a bad experience with a print I liked and a hot car… never again!) 3 walls, 25% infill, gyroid. I used supports for most things, but many don't really need them. I think all the files are in the…
The Deluxe Game of Galactic Cruise had cardboard trays that were a bit too snug for the Blueprints, Cockpit, and Engines. I designed these as a nice alternative. I printed with 20% Infill on PLA Plus.
When Sheev Palpatine formed the Galactic Empire, he adopted a different version of the Galactic Republic’s crest. The new cog with six spokes was used throughout the organization. It’s visible on uniforms, flags, and even propaganda…
Print this in gold, green/blue or pink to get RICH and annoy Mission control while you are at it! ROCK AND STONE!
Mention The Empire and suddenly it feels like the dark side of the Force is among us. Because it is. Long a symbol of treachery and deceit, bringing out the worst in our nature. And it all starts with this logo. Who knows, maybe showing…
A stencil for drawing letters in standard galactic alphabet. Used in Commander Keen or Minecraft. Unfortunately I had no Prusament galaxy black, thus I printed it with white PETG. If you want to have bigger or smaller letters, or wish to…
These are pickaxe parts from Deep Rock Galactic. I plan on adding more if I can, later. Some of the parts have collisions with other parts, that can be removed, so that the pieces fit together. They also have color, so hopefully that's…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
Here are the files for my Galactic Crates, The Crates and their lids all print with zero supports, and have brackets on the front to hold a sign of your choice. I have included a selection of signs in Aurebesh to give the feeling that…
A Drg Company Standard Pickaxe Made In Tinkercad
Sur l'idée des équerres d'étagères du thème Mario, j'ai dessiné des versions Star Wars. Voici la version avec l'emblème de l'Empire Galactique. Faites vous plaisir ! From the idea of shelves brackets about Mario, I've designed some on the…
I liked the original model a lot, but I think two layers for the base is a little bit too thin especially when ironing (can see through the base with two layers). So I added a third layer at the base. Print instructions Print using 0.15mm…
This is a slightly long balisong. very smooth and balanced. Slight handle bias. Printed at 90% infill, both the blades and handles. .2 layer height on a bambu p1s. I used Overture clear PETG Hardware: 2x M3 Screws 2x M3 Washers 1x M3 nut.…
A dice tower designed for the Deep Rock Galactic board game. The idea was to use the drop pod from the game as the tower, with a "landing site" as the dice capture area. The model was extracted from the game and modified heavily to make…
Edit: I re do it from the ground up check this one is much better https://www.printables.com/model/1411517-supplypod-drg-dicetower-v2 is a Dice Tower inspired on a SupplyPod Deep Rock Galactic Videogame/Boardgame i hope you like it, its…
I fixed all of the errors I could and merged the Front 2 parts, Mid 2 parts and the Rear 2 parts. I am still working on the Flight Pods, but I can confirm these 3 parts print just fine SLA. Not sure of the scale until I get the whole…
This little fidget clicker brings big charm in a small form! It’s quick to print, fun to press, and totally irresistible for fans of cute and satisfying desk toys. Private Use ONLY ! If you’re interested in a commercial license to sell 3D…
Here's my version of the Galactic Credit Standard. Category: Props
This is a full set of storage trays to organize all the components from Deep Rock Galactic Standard Edition board game. Don’t use these if you have the Deluxe Edition; use these great models from ItsJustOvis instead. These trays are great…
I got a new notebook and wanted to decorate it with something so i made this. I recommend taping this to a flat surface and spraying a thin coat of spray paint on whatever you want. I used PLA 20% infill.
A set of boxes sized to fit within the tray of the Deluxe and collector's edition of the game. (I have the collectors edition but from what I've seen the Deluxe edition's tray is the same size so all boxes should fit) I got annoyed by the…
Three cubits modelled from close ups, ideal for resin printing.
Best Viper model out there. I just added some plugs to make the engines and wings easier to assemble and sturdier. The main fuselage was clipped to fit on a Flashforge Adventure 5. I also played with the Viper base from:…
Galactic Unicorn Screen Mount! Requires 1x heat insert and a 25mm M3 Screw. Use 4 tiny M2 self tapping screws (4 to 6mm long) on the back to secure the screen to the plastic inside case. Hope you like my design! you will need a 350mm bed…
-Fan Art- Stencil of the Galactic Empire Crest to decorate your wall. Just hang it on a nail on your wall. You can scale it to the size you want if you keep the aspect ratio. The heigtht is only 1,4mm (7 layers). If you scale the logo,…
A Cylon helment/head from Battlestar Galactica. Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've…
I have always loved the look of the Valkyrie, and Davids model is fantastic. I took my purchased CGTrader greeble sla's and did a re-skin (not studio accurate) of the model and increased the scale for my Anycubic Mono. I made 2 versions,…
Short Description/TLDR These are organizers for you to put all your tokens in that will fit nicely inside the expansion boxes. For Space Rig, print x1 of each of DRGTBG Space Rig Tray 1 and DRGTBG Space Rig Tray 2. For Biomes, print x2 of…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu…
Rank Badges for the Blue Commanders! Check out my other badges For the whole set! I’m putting together a display for them too. Printed at 25%
So, in addition to quite a lot of filament, you will also need: 30 magnets (4×5 mm) 18 nails (1.6×15 mm) Glue (to fix the magnets and some icons into their sockets) A lighter (to insert the nails) Filament used: Polyterra Pastel Peanut,…
Great source files at Thingiverse by EDY209 and David Bogearts for a great ship of the past. However, some of the parts had holes or gaps that negatively affected the print. I did what I could to fix those files so they print better. The…
I wanted to have a barrel from the space rig all for myself, but no one has modeled yet, so I spent a bit of my time finally giving back to the community. Rock and Stone brothers, make management suffer.
A single keycap version of the Galactic Empire and Rebel Alliance sets that goes over the number pad. These work on the Logitech G-610 and a Corsair keyboard in my house, but they should fit some other mechanical keyboards. Both keyboards…
This is an expansion pack for my BattleFleet (Star Wars vs Star Trek) game: http://www.thingiverse.com/thing:2052630 The set consists of ships from the 2003 Battlestar Galactica Reboot. BaseStar Cylon Raider Viper Battlestar Galactica…
Lloyd the bartender of Drg.
Design Concept The Battlestar Galactic Mini Model is inspired by science fiction battle starships, capturing the essence of a classic vessel in a compact size. Purpose This model serves as a collectible item for fans of space opera series…
A Viper sign from Battlestar Galactica
Add a touch of droid sophistication to your neckerchief with this sleek C-3PO woggle!
Model of BSG Blackbird created in Tinkercad and Fusion 360
From "Galactica 1980" also seen in Buck Rogers in the 25th Century Season 2
Update: 09/12/2005 - I have added rail buttons, just in case you needed them. Update: 11/19/2025 - trimmed off 5mm from each fin so that it might fit on smaller beds. Let me know! Update: 11/21/2025 - I pulled the Stubby fincan. It didn't…
It's the Towel Day today so don't forget your towel! Here's a hitchhiker, let's call him Ford Prefect. Model created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. Let me know how it…
A simple bracket to allow mounting of the Pimoroni Galactic Unicorn LED panel on an Ikea Skadis pegboard, print lying on the side so as to need no supports. You'll need 4 M2x6mm screws to attach the Galactic Unicorn board, then it'll just…
I made this stand for DavidBogaerts model from Thingiverse. His original file is X=63.51mm, Y=119.03mm, Z=45.17mm. I scaled it up 140%. I chose that size because I had a Cylon Raider model that I scaled up to 387%. I estimated the…
I made these parts to make the print better. Original model on Thingiverse: https://www.thingiverse.com/thing:2432066 The dome replacement was necessary because the original didn't seem to be fully connected on at least one half of the…
-Fan Art- Stencil of the Galactic Republic Crest to decorate your wall two versions: 6 and 8 rayed Just hang it on a nail on your wall. You can scale it to the size you want if you keep the aspect ratio. The heigtht is only 1,4mm (7…
Deep rock galactic trinket. I made this in one day and am very glad that it turned out. You can hang this trinket on your backpack or wherever you like.
3d printable oxygen tanks for use in the Deep Rock Galactic board game, specifically the Space Rig Expansion. ROCK AND STONE
Multicolor Battelstar Galactica Officer Badge. Haven't printed it yet cause I don't have the right colors on hand. Maybe someone can help me out by positing a make. Check out my other badges. And have fun printing.
Organizer for Battlestar Galactica - Base game and Pegasus to store them in a single box. Some decks are stored merged since we almost always use Pegasus. I printed an additional english rulebook for Pegasus, so maybe you will need a…
I've been working on this project on and off since 2019. Exported the mug files from the game files itself and converted to STLs. Over the years I used my caveman modeling skills in Blender to make something printable. Early on I printed…
Short Description/TLDR These are hidden cave organizer tiles to lock their movement in box while also making packing upper layers easier by providing a flat resting surface. Print 4x. 148mm wide, so can print on any standard size printer,…
File Description: Minecraft Stencil File Name: Minecraft Stencil.stl File Type: STL (Stereolithography) Purpose: This 3D model is designed to be used as a stencil, featuring motifs or patterns inspired by the popular game Minecraft.…
As a token of appreciation I've made a Galactic space credit Consists of 3 parts to make muti color a bit easier. Does not have any other function or purpose :) Needs a tad of glue to assemble
Made to be printed in multiple parts with as little supports as possible. Fits following 500ml aluminium cup inserts: Upper outer diamater: 83mm Lower outer diameter: 62mm Height: 123mm The Handle can be glued on, but I recommend…
Bring the power of the Galactic Empire to your room with this clean 3D model of the Imperial Cog. This version is designed with sharp, distinct spokes to ensure a high-quality print that reflects the cold efficiency of the Imperial Navy.
Pivoting screen mount for Pimoroni's Galactic Unicorn (Pico W Aboard) display that is designed to be printed with a minimum 220mm print bed such as the Ender 3 or Prusa MK3. Print at 30% infill with supports This is a remix of…
Storage trays and boxes for all the tokens in the Space Rig and Biomes Expansions of the Deep Rock Galactic board game. Similar to my other trays, these all fit within their respective boxes with plenty of spare room. Note: I put the 5…
These are Galactic Empire and Rebel Alliance logo keycap sets intended to go on the number pad. I've tried them on a Logitech G-610 and tested the insert on a Corsair, but they should fit other keyboards. You can print a single insert and…
Bring a slice of the Star Wars galaxy to your baking with this Patrol Trooper Helmet Cookie Cutter ! Designed to replicate the sleek and detailed helmet of the Patrol Trooper, this cutter is ideal for Star Wars-themed parties, movie…
Helldivers Fais sur Nomad Sculpt TableTop édition FanArt Pre-Supporté 32mm Socle : https://www.printables.com/model/1701671-base-28mm-32mm Cadeau de donation sur Ko-Fi Autres liens : Pinterest : https://pin.it/3WuBRdGWm Cults :…
![#0199 Star Wars Fanout Card Case [ Galactic Empire ]](https://media.printables.com/media/prints/1197976/images/9008966_ba0d379a-b3cd-4871-9fd5-95e0c024c9ed_fef5bf41-d887-48cd-a53f-6760f1489d45/fanout-card-case-ge.jpg)
