41 modeli
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Update 25.8 Added a version separated into 3 parts to prevent the stick from breaking. V2 – with "R" gear and new design. Available with keychain holes. Fully print-in-place – no assembly required. Tip: When removing the plate from the…
The Gearshift Fidget is the perfect fidget for all car lovers! But it's also perfect for everyone else, because it's simply great fun to use. The aim is to move the gearshift lever through the various positions. It is designed so that you…
The revisiting of an old project of mine, which I had published here on Thingiverse with my old profile Ive printed using a Bambulab X1C and printed with Sunlu Matte PLA.
“R” gear - available in both right-side and left-side versions For a smoother gear shifting experience, press the lever down while changing gears . Fully print-in-place – no assembly required No supports needed Tip: When removing the…
Broke my gearshift cover. so i reconstructed it in CAD. Printed it with my Prusa Sl1 s.
Gearshift Dacia Logan Lever hole diameter 12 mm Software: PrusaSlicer 2.7.1 Perimeters : 4 Infill : 10% Brim : Yes Skirt : No Support : Yes Layer height: 0.2 mm Material : ABS If you print this accesories please share your make, leave a…
3 Part build, easy assembly, fun toy to play with Handle Clips onto the bottom of the body, cap snaps onto the top and then you can play with it! Infill: use 3-7% infill, but at least 10% for the handle as it is quite thin Supports:No…
No support needed. ENJOY!
Manípulo da engrenagem em duas partes...
While removing my old gearshift knob, I broke the adapter. So with the broken piece, I designed an equivalent/compatible model. The lever rod has a diameter of 11.0mm (11.1 to 11.2mm on the knurled areas). Try many inner diameter…
BMW GEARSHIFTER MULTI COLOR fidget toy
AUDI GEARSHIFTER MULTI COLOR fidget toy
DISCLAIMER!!! this is potentially a dangerous or even deadly part to 3d print and use, someone rightfully pointed this out to me. So if you print this file you are taking full responsibility for whatever happens due to usage of this part.…
basic template for making your own gear shift knob, the gap on top should fit the original cap, and the neck is wide enough to allow the reverse lock pull to be used unmodified. quickly tossed together for a mates truck while his…
This is just a little fidget toy I made for myself. It can also be used as a key chain, but in that case you need to add a hole. The toy is also a little fragile, but still fun to play with. All the parts are printed separately. Then you…
It is a custom knob for citroen and pegueot from 2004 to 1996 valid for almost any model that year. The measure of the rod is 10.4mm, it can be valid for other brands but I have not investigated it. In the lower part it has four holes to…
I fixed my wobbly shift knob. The cause was the broken bushing! I printed a replacement, and it works great! I also created a retaining part that I accidentally broke while working on it. ***If you need to remove this part, you'll have to…
Remix of popular fidget made for Heat board game Printing: PETG 3 walls, 4 top and bottom layers, 15% infill Be careful with the main part, spring can be damaged if you force it of the plate when it's done For main part, do a colour…
This is the cover on the automatic gearshift, for Volkswagen T4 automatic
bicycle gearshift handle pad Print Settings Printer: Bluer Two Trees Rafts: Yes Supports: No Resolution: 200 Infill: 20 Filament: my3D PETG Black Category: Sport & Outdoors
Gearshift pattern fit to gear lever knob which is e.g. suitable for Fendt. Printed in two steps. At first the text is printed with white filament and afterwards the rest is printed in black. Place the .stl file on the bed between the…
The Golf's Gearshifter was defect, because the gearshift inner guide was defect. To get the car running again, at least temporarily, I redesigned the gearshift guide. The challenge with replacing it is that the entire assembly can only be…
Gearshift lever ring - attachment for leather cover for gearshift lever.
When you want to install this on your bike, first remove all the old rubber. There are some edges that this model grips on. I printed the model with support on the bed
Need 2 shafts for the top of the gearshifter model previusely posted.
This works very well on my Husqvarna snowblower. It is difficult to select 1st and 2nd gears since there is no indicator. This helps a lot.
These fasteners are suitable for Renault Clio 3 Phase 2 frames (82 00 393 246). They break quite easily, and a plastic frame costs €15-20. Rather than replacing the whole thing, you can now replace just the fragile parts. For a good bond,…
My brother has a Triumph TR6 and the surround for the gearshift was cracked in a couple of places - he asked me to create a trim ring to hide the cracks and then thought that others might want something similar. It's just a ring - 118mm…
This is the top piece of a manual gearshifter to use without buying expensive equepment
Habe das Mauspad gebaut das ich gerade keine Hangschaltung auf dem Halter habe und so kann man es gut dafür benutzen. Es hält direkt, muss nicht geklebt werden. Drucken geht easy natürlich ohne Supports.
Концепция дизайна Деталь предназначена для использования в механизме переключения передач автомобиля Volkswagen Caddy. Применение Используется в качестве запасной части кулисы коробки передач Volkswagen Caddy, может заменить сломанную или…
a custom Thrustmaster TH8S Gearshifter Knob inspired by top gear and the Stig specifically. made using tinkercad and bumpmesh. i got the Stig model from thingiverse. based the model off of the examples models provided by Thrustmaster…
The Gearshift Fidget is the perfect fidget for all car lovers! But it's also perfect for everyone else, because it's simply great fun to use. The aim is to move the gearshift lever through the various positions. It is designed so that you…
Update 25.8 Added a version separated into 3 parts to prevent the stick from breaking. V2 – with "R" gear and new design. Available with keychain holes. Fully print-in-place – no assembly required. Tip: When removing the plate from the…
Remix of popular fidget made for Heat board game Printing: PETG 3 walls, 4 top and bottom layers, 15% infill Be careful with the main part, spring can be damaged if you force it of the plate when it's done For main part, do a colour…
These fasteners are suitable for Renault Clio 3 Phase 2 frames (82 00 393 246). They break quite easily, and a plastic frame costs €15-20. Rather than replacing the whole thing, you can now replace just the fragile parts. For a good bond,…
The Golf's Gearshifter was defect, because the gearshift inner guide was defect. To get the car running again, at least temporarily, I redesigned the gearshift guide. The challenge with replacing it is that the entire assembly can only be…
3 Part build, easy assembly, fun toy to play with Handle Clips onto the bottom of the body, cap snaps onto the top and then you can play with it! Infill: use 3-7% infill, but at least 10% for the handle as it is quite thin Supports:No…
It is a custom knob for citroen and pegueot from 2004 to 1996 valid for almost any model that year. The measure of the rod is 10.4mm, it can be valid for other brands but I have not investigated it. In the lower part it has four holes to…
