1498 modeli
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
This cute bear figurine is perfect for a quick print, taking only 25 minutes to complete! Designed with smooth lines and simple shapes, it’s an ideal project for both beginners and seasoned makers. While minimal supports are needed for…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Simple Process Diagramm Template (ISO 5807) in a 5 mm Grid (20x40)
Wydruk około 0,23 €–0,29 € nettoWstępna wycena jednego wariantu
Hey there! After I noticed release of the contest, “Contour Duplication Tools” was released, I spent a few days creating a simple, yet effective design. I present to you a very simple, customizable, fully 3D printed compass & wood…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
I got tired of reaching down to the floor to find my cable everytime i wanted to charge my phone in bed, so i made a cable clip so that it's always attached to my nightstand. Been using it for one month before this upload with no…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
No comments required & remixes are highly encouraged. Check out my post-midterm version also:
Wydruk około 2,51 €–3,07 € nettoWstępna wycena jednego wariantu
I also added the openscad files just in case.
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
This is ARTEMIS program logo by NASA (ESA, JAXA, CSA) with the goal of landing "the first woman and the next man" on the Moon. There is version with and without hole on the top (see files). To print it coloured see printing details on the…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
I added a monogram. And cut it all the way through.
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Chemické piktogramy, upravené pro tisk
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
This insert is designed to fit Banangrams in the photo caddy. This design along with several others have OpenSCAD files available on my GitHub Made specifically to fit Photo and Craft Keeper 4x6 inch storage bins (made by Simply Tidy and…
Wydruk około 4,81 €–5,87 € nettoWstępna wycena jednego wariantu
See also the new version with air vents . As I didn't really liked the original housing of the CV-Programmer by mXion, I just created an alternative. To prevent the electronic board from moving inside, I suggest to add a small…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
Variace na klasický Tangram.
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
Tvorba šachových figurek v Blenderu a následný tisk.
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Můžete si stahnout dva modely. Jeden je pro průměr trnu 6,35 mm a druhý pro průměr trnu 7,25 mm. You can download two models. One is for a 6.35mm mandrel diameter and the other is for a 7.25mm mandrel diameter.
Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu
A measure with two pointed tips 10cm apart from each other for use as a scale reference in photogrammetry work.
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
Smyslem projektu je ukázat, že v některých úlohách školské matematiky se neobejdeme bez skutečného 3D objektu a že takové objekty si může každý vytisknout sám - Platónská tělesa.
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
I found 0.15 layers to work the best. Printed in PLA. Might be worth trying ironing.
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
A measure with two pointed tips a fixed metric distance apart for use as a scale reference in photogrammetry. Designed flat so you don't have to worry so much about stepping on it.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This is a programming Adapter with Pogopins for Evolv DNA60 boards. Put the 5 Pogopins (1mm diameter) in the adapter and solder them to the evolv usb-board. Use: Press the pogopins with something flat (like the tool thats on the photo)…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A measure with two pointed tips a fixed amount of inches apart for use as a scale reference in photogrammetry.
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Adaptér na gramofonový singl má na sobě českou vlajkou která se používá na českých vojenských vozech a vrtulnících převážně těch z dílny VHÚ. Nutné je mít 2 barvy filamentu na vytisknutí. The adapter for the gramophone single has a Czech…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
A hand drawn design for a keychain spelling the name Nina when read both ways
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
The custom spacebar keycap for the Bambu Lab Automatic Material System (AMS) balances functional utility with rapid manufacturing efficiency. Weighing approximately 14 grams , this lightweight component is engineered to maintain a…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
The centre character has a slightly goofier expression and an awkward grin due to his disastrous loss in the Nov 3rd 2026, midterm elections.
Wydruk około 2,58 €–3,16 € nettoWstępna wycena jednego wariantu
Print recommendations : Material : PLA Layer height : 0,3mm Brims : 5mm Perimeters : 4 infill : 15% Number : 3 Details : Printing time (for 3 models) : 21min Filament used (g) : 4 Note : The models shown on the picture are the "20mm…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Description To ensure the timely replenishment of my pet bird, Peanut’s, water supply, I devised an electronic project. Previously, I would often forget to check on Peanut due to his ability to go days without water. This project aims to…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Žáci si vyhledají data pro klimatické charakteristiky měst Evropy. Ty následně zpracují v aplikaci excel a vytvoří graf v programu TinkerCad. Na závěr graf upraví ve slicovacím programu a vytisknou.
Wydruk około 2,33 €–2,85 € nettoWstępna wycena jednego wariantu
My wife always blames the same thing. I don't know where she thinks all my daughter's toys should be stored. After some discussion, she showed me wooden parts with pictures of what should go in each drawer. But who needs wood when they…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Žáci 7. ročníku měli za úkol vytvořit tangram sadu, která bude věnována budoucím prvňáčkům jako pomůcka pro rozvoj logického myšlení a prostorové orientace.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Žáci se seznámí s modelováním v programu „Sculptris“. Součástí aktivity je příprava hotového modelu pro 3D tisk, posouzení vhodnosti modelu pro 3D tisk a tisk některých modelů
Wydruk około 2,06 €–2,51 € nettoWstępna wycena jednego wariantu
studenti se pokusí vymodelovat a vytisknout 3Dmodely různých druhů mincí či bankovek, které poté využijí mladší studenti při finanční gramotnosti či matematice na prvním stupni
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Výroba raznic loga, šipky a piktogramů všech čtyř oborů vyučovaných v ZUŠ Uherský Brod. Raznice budou použity k výrobě keramických dlaždic pro vnitřní orientaci v budově ZUŠ.
Wydruk około 3,50 €–4,27 € nettoWstępna wycena jednego wariantu
Miniature template for drawing electrical schematics. See also: Template For Flowchart Diagrams https://www.printables.com/cs/model/792825-french-rulers Template For Logic Diagrams…
Versatile drain cleaning tool available in three lengths—15cm, 20cm, and 25cm—designed to effectively unclog and remove hair and stubborn debris from (drain) pipes. Works with most filament types, provided they aren’t overly flexible or…
DESCRIPTION: This is a very compact yet highly useful tool to have wherever you go! Whether it's hiking, camping, swimming, or even sports this whistle is ready for the occasion. READ PRINT INSTRUCTIONS 👇 Please feel free to leave a…
This little print-in-place container features a satisfying snap-action lid that swings over 180 degrees. This extra range lets the lid flip all the way out of the way so the box will be stable with the lid open or shut. This special hinge…
ID HOLDER V2 Fits almost all card sizes and types CHANGE LOG 08/26/2026 Added Double ID Case Main Changes Removed push down pins (Breaks too often) Fixed hexagon pattern Optimized for easy printing Main Features Horizontal Print - Under…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as a single color or multi color print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma…
Pill organizer / vitamin reminder with a labeled slot for each day of the week. To use, loosen the screw 1 turn and twist the lid to the current day. The lid & screw are fully removable to refill the container at the end of the week. To…
Flowchart template in two sizes. See also: Template For Logic Diagrams https://www.printables.com/cs/model/777808-template-for-logic-diagrams Template For Electrical Diagrams…
After the great success of " Template For Electrical Diagrams ," I made a version for logic circuits. See also: Template For Flowchart Diagrams https://www.printables.com/cs/model/780713-template-for-flowchart-diagrams Template For…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Jebediah Kerman from the game Kerbal Space Program in his IVA suit. the suit is a mix from the different suits that the game had along the different versions, cinematics and the ACES suit. I printed it at 250%, .08 layer height on my…
This cute dinosaur figurine is perfect for a quick print, taking only 25 minutes to complete! Designed with smooth lines and simple shapes, it’s an ideal project for both beginners and seasoned makers. While minimal supports are needed…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Introducing a new and improved template for drawing electrical schematics. With the help of the template, you will be able to draw cross-sectional electrical diagrams. It is suitable for beginners and students. The template is designed so…
A 3x3in stone circle with carved pentagram. Can be used as a piece of terrain or a base. Suitable for tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE A demon…
This keychain has an embedded NFC tag that links to any link you program it to. There is a print pause at layer 11 where you would have to put the NFC tag and resume printing. The recess is made for tags that are 25mm in diameter and 1mm…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as a single color or multi color print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma…
A Tangram puzzle game. Many probably know this game from childhood. There are thousands of pictures you can put. Each picture is a puzzle in itself and in the end you have to put the parts back into the square plate. A nice pastime. Here…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Welcome to my Ingram MAC-11 replica prop! This model assumes you have some experience putting together 3D printed props - there are a lot of parts, and sanding, priming, painting and assembly will be required! Please read the assembly PDF…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as a single color or multi color print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as a single color or multi color print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
My brother needed a way to organize his hats and the models I could find wasted quite a bit of filament. I decided to make my own and design them in such a way that I could quickly print out a big plate with many holders. Every hat holder…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
3D Printed Keychain Letters Add a personal touch to your keys with these customizable 3D printed keychain letters! These letters are perfect for anyone looking to add a bit of flair to their keys. With the ability to print in various…
A filament indicator for Prusament classic spools (non NFC) . Update 2026-01-27: Added v2 with small corrections on weights, added TPU To be placed over the 4 consecutive fully open hexagons (see picture). It snaps in the hexagons around…
This cute baby turtle figurine is perfect for a quick print, taking only 25 minutes to complete! Designed with smooth lines and simple shapes, it’s an ideal project for both beginners and seasoned makers. While minimal supports are needed…
Handy ruler with extras 📏⚡ • Holes for measuring wire & component diameters 🧰 • Connector size templates 🔌 • Basic electrical symbols ⚙ • Centimeter scale for precise measurements 📐 Perfect tool for makers and electricians! 🛠✨
Update 2024-05-22: Added letters G, S, T, M and W. Update 2024-05-17: Added letters A, C and H. Update 2023-05-18: Added letters P and B. Added isolated post and bolt files so you can remix or print replacements. I designed these simple…
GHS Physical/ Health/ Environmental Hazards Pictograms In my profiles (Bambu Studio) there is 1 sign per printing plate, the printing plates are named accordingly. The Signs are already colored and an AMS is neccessary. for more…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as a single color or multi color print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as a single color or multi color print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as a single color or multi color print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as a single color or multi color print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma…
The mouse needed a name, so it is now called the Lil Magnum! Because it is small! Be sure to check out the tips on successfully printing a good, light Li'l Magnum ! NOTE: I don't have an R1 to test. The R1 has the same screw pattern and…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Here are the files for my Pentagram Cauldron, I designed it to fit a Adafruit Circuit Playground then the "Filling" (Lid) to be printed in transparent fillament (or in Resin if you are lucky) to diffuse the Neopixels, though a little…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
This model was made for festival HISTORIE ROCKU (history of rock), which was this year in our city. You just cut our text and change it for your own.
At the entrance of many sacred Japanese shrines, gardens, etc are these Komainu “Lion Dog” statues--usually in pairs, on either side of the entryway. I took about 100 photos of this komainu at the Portland Japanese Garden, and then used a…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
The Ultimate Creatine Scoop is a fully parametric, support-free measuring scoop designed for creatine (or any fine supplement powder of the same density). Built in Onshape and publicly available, you can easily duplicate the design and…
[First, let me offer you something fantastic] I've released 22 fantastic customizer programs "Amazing STL Creator". Try them out. Create STLs that will amaze your friends. Right now is the best time to get all my programs. Get the entire…
This cute pig figurine is perfect for a quick print, taking only 25 minutes to complete! Designed with smooth lines and simple shapes, it’s an ideal project for both beginners and seasoned makers. While minimal supports are needed for…
This is a simple pentagram I designed to go on my medicine cabinet as I found the normal green cross sticker quite boring. Post-Printing Installation I just glued the pentagram to the medicine cabinet with Fixogum rubber cement. How I…
Can be printed in a single color, but works best with multiple colors. I used two filament swaps to print the back plate, traces and letter in different filaments. Tip: when slicing, PrusaSlicer should detect the model is a sign or logo…
YJ board CH341A Serial/Memory Programmer Enclosure YJ board CH341A Pro Serial interface / Memory Programmer Case with exposure of ZIF socket and DuPont connectors. The enclosure holds the board snugly. Led Light pipes optional part but…
A very simple print to keep your Darkglass Anagram a bit safer.
This design is fully 2D printable in A4 format, but was still a challenge to create. I wanted to create a guide for assembly and figured it could be interesting to others. For more details, please visit the original listing on…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Printed for a friend, so i share my design if someone want it ! Scallable, printed on X1C with 6 walls in PLA-CF black. Sorry but i can't set a real picture because i gave it to my friend… Be careful, due to it's design, the star stay…
Photogrammetry scan of a starfish shell I got in Croatia in 1998. The scan was repaired to have a perfectly flat bottom and no holes. The pictures for photogrammetry were taken with an iPhone X and Meshroom was used to reconstruct the…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
Tangram for a school Tiles height: 6mm Play between tiles : 0.25 mm Play between tiles and base : 0.25 mm Base height : 8mm ( tiles fit inside.) Size with base : 15x15 cm Tangram only : 14x14 cm Only Two bottom layer on Base to optimise…
Customizable Triple Letter Blocks Ambigram This is a 3D ambigram made of letter blocks that are each shaped like three different letters when viewed from three orthogonal viewpoints. You can create your own with the customizer using…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
![ID HOLDER V2 [ONLY 7 GRAMS]](https://media.printables.com/media/prints/c3d89ab6-692e-4718-ae21-d77c9a937dcb/images/13675664_86c1c2d3-66e9-4bac-8802-cc164a994983_4e5edc55-93fe-4c46-8733-e0bf3494bb3c/id-case.webp)
