Indoor Helium Antenna Mount
Printed this for mounting the antenna indoor. The diameter of the antenna is 23mm, made it bit wider for wiggle room. No supports needed, printed with PLA. Not the best quality print.
- Pobrania
- 81
- Polubienia
- 16
- Ocena
- 0
Liczymy pasujące modele…
Printed this for mounting the antenna indoor. The diameter of the antenna is 23mm, made it bit wider for wiggle room. No supports needed, printed with PLA. Not the best quality print.
Designed this for my son Harry for a school science project. Simple Helium atom model. Fairly easy to print added "Helium Refined" to the things.. looks a little better and thicker lines for stability Category: Physics & Astronomy
Designed this to mount an RP SMA helium hotspot miner Antenna outside. Suggest uv resistive printing materials such as ASA. Covered mine with epoxy at the corners to support the antenna more. Stuck a command strip to the back and one on…
Base for a helium antena 28.5mm diameter Printed in PETG 5 perimeters 5% infil SUPER STRONG use supports on the flat part at the bottom a bit tight, so I would scale it 0,5% up for easy intalation
UPDATE 2/10/22 - Added a new lid version with much better buttons and a few tweaks to facilitate printing. Doing a filament swap does a nice job of highlighting the logo and button icons. Quick remix of philltran's mapper enclosure to…
A little collection of different mounts I use for my Helium Miner Antennas. You can obviously use these to mount pretty much any other (RP-)SMA Antenna that physically fits. So this can be used to mount WiFi / LoRa / GPS as well. They are…
I designed this enclosure so that I can mount my Helium hotspot outside. This miner (Finestra) is an “indoor” hotspot, but I bought a 15 cable and 5.8dbi antenna. Printed in PETG (my first successful PETG project) with .4mm nozzle on a…
Designed and printed this for my son Harry for a school project.. Liked this one better than the single print version I made before... looks better and more 3D Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: .2 Infill:…
Printed in PLA. I used 2 3M command strips to hold it to the window.
This case it designed around the stock antenna included with the CubeCell It features a print-in-place compliant mechanism as a button for the USR switch. RST switch is configured to be pressed with a paperclip or other small object.…
Through the window antenna mount for a Helium Hotspot with vertical wall hanger for the hotspot itself. Print instructions Helium-Hotspot-Holster-and-Antenna-Mount This is a vertical hang "holster" for a Helium Hotspot with a beam to…
Spruce up your coffee table and spark scientific conversations with this unique coaster! Featuring a visualization of the Helium atom based on Bohr's model, it includes the atom's essential details: atomic number, mass, and symbol. This…
This is a wall mount for a Nebra Miner that I made.
This should print nicely at 0.1 but even at 0.3 it's fine, with at least 15% infill to be safe. Printed using Prusa MK3S+ and PETG Print files are at about 70% size, with ~30% infill https://www.helium.com/
Two lids for use with the original modular case system to allow Rak2287 and Rak2245 Pi hats/concentrators exposing the heatsink for cooling (and hotrod looks) as well as adding a boss with hex for an external SMA connector. Useful for…
Wall mount coming in soon! For now print this on 0.2mm layers and make it stop at a certain layer to change colors!
A mount for Helium Mobile Outdoor Hotspot that attaches to a window suction cup. This allows you to aim the router outsi
A foot to increase surface area of the software bisque MyT tripod foot. Worked great and its a tight friction fit. I used it on a field with success!
This is a printable rim to make a helium tank into a simple container. I had a empty helium tank sitting around and decided to cut the top off and make a lidded container. I designed and printed a rim to cover the edges. The top has a…
Bracket for Mounting Helium Mobile Outdoor hotspot on a flat surface.
Nice keychain with helium atom. Cosists of two electrons two protons and two neutrons.
GoPro Hero 9 Mount - Dedrones Helium (Reddy) 2 model version: 20º 30º Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill: 100 Filament: Smartfil TPU True Black Category: R/C…
Top holes are for some accent screws to give it some wight
Lid for a RAK v2 Helium Miner with Helium logo engraved in it.
Frontal bumper sin logo - Dedrones Helium (Reddy) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Filament: Smartfil TPU True black Category: R/C Vehicles
Einfacher Fuss zur befestigung eines Heliumballons zum Geburtstag in Pyramidenform. 2 Bauteile Pyramide + Deckel Gedruckt mit Sunlu PLA Matt Weiß Einstellungen: 1.Schicht 195 den rest 205 Grad Celsius Speed 0,2mm / Infill 30% / Perimeter…
Screw-attach wall mount for the Helium Mobile Indoor Hotspot (https://www.helium.com/mobile/hotspotindoor). The strap wraps around the hotspot body and fastens to the wall with two screws — airflow vents stay unobstructed. Print notes:…
3D-printable wall mount and vertical stand for the original Helium IoT Hotspot (the "OG" miner). Doubles as a desktop stand to hold the device upright with airflow clearance, or screw-mounts to a wall. Autodesk file viewer:…
A printable mounting plate for a Helium hotspot setup. Print guidance Use PETG, ASA, or another material suited to the planned environment. Print with 3 to 4 perimeters and 20% or more infill. Installation Confirm your hotspot dimensions,…
This should print nicely at 0.1 but even at 0.3 it's fine, with at least 15% infill to be safe. Printed using Prusa MK3S+ and PETG Print files are at about 70% size, with ~30% infill https://www.helium.com/