3186 modeli
Video : https://www.tiktok.com/@body3d_/video/7151361561372691717 Full Collection : https://cults3d.com/en/3d-model/various/ghost-booh-x10-body3d
Wydruk około 2,86 €–3,49 € nettoWstępna wycena jednego wariantu
Cute Ghost Friends Print Settings Material: Prusament Gentleman's Grey Pla Nozzle: 0.4mm Support: No
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Ghost Emoji Decorations! I hope you all have a spooky yet happy Halloween this year with these super cool Emoji Ghosts! Version 4 - 24/09/2023: Updated STL Files released. Added a thicker base for each 'foot' of the models, making it much…
Wydruk około 7,37 €–9,01 € nettoWstępna wycena jednego wariantu
Use tree supports on build plate only. The Twisty Ghost Fidget Toy is a cute Halloween-themed fidget shaped like a little ghost. Its body is made from 9 nested moving segments that can be pushed and pulled up and down. Move the individual…
Wydruk około 4,33 €–5,29 € nettoWstępna wycena jednego wariantu
A tiny ghost figurine to bring some haunting fun into your Halloween setup! No supports needed. ✅ Only 10 mm tall – small but full of spooky charm ✅ Perfect for hiding around the house to surprise family and friends 👻 ✅ Quick print – make…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed pacman remix could work better:…
Wydruk około 5,93 €–7,25 € nettoWstępna wycena jednego wariantu
8Bit PAC-MAN's ghosts are back as a decoration (and/or light) for your computer desk or the shelf next to it. Easy to print and colorful brings back memories from that golden age where the video games are start to rule the world. Its easy…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Items you need: 2 x “4mm x 30cm” paracord. *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power). *2 x “12mm” wiggly eyes. Super glue (for the eyes and magnets). *If you do not have…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Say hi to the Articulated Ghost Buddy – a spooky but cute little ghost with posable legs and arms. Use tree supports and back seam position. ✅ 65 mm tall ✅ Articulated legs for playful posing ✅ Fun Halloween decoration or year-round…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena jednego wariantu
Description: I loved the cat ghost that ncsandor made, so remixed it with a hollow body that should be big enough for a tealight. I also created a channel on the side to fit the wires for other lights. Printing: I printed my example with…
Wydruk około 0,63 €–0,76 € nettoWstępna wycena jednego wariantu
His friend Print Settings Material: Prusament Mystic Green Pla Nozzle: 0.4mm Support: No
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
This enchanting 3D Printed Ghost Decoration with a captivating twist - it illuminates with a mesmerizing glow when you place a tea light inside! This spooky and whimsical ghost is the perfect addition to your Halloween decor, adding an…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7540265970645110038 ℹ Discription: This chibi-style Ghostface figure was custom-designed to blend playful proportions with…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu
Sculpt ghost for There's A Ghost In My House game New version for LED candle: https://www.prusaprinters.org/prints/48408-theres-a-ghost-glowing-in-my-house
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
This model it's FREE and part of the upcoming releases as part of a fan made project to create every Ghost from the game as collectibles, please support this project, all this is for purchase filament to keep testing the upcoming updates,…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a cute little ghost with whistle function: Plays two off-key notes: F6# and E6 (cover the other hole) Blow in reverse direction and it makes a howling wind noise. Hole on top for attaching to bag or hanging up as Halloween…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
To print this you can choose the group you want, load in your filament, print the group.. rinse and repeat. settings for gcode files filament > PLA nozzle ø > 0.40mm layer height > 0.15mm infill (general) > 10% gyroid infill (special for…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Legal Note: Ghost of Tsushima is of course copyright of Sucker Punch Productions all rights reserved. I was inspired to create my own version of a Japanese garden lantern after playing the brilliant game Ghost of Tsushima, I came across a…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
A Skull Ghost in Priestley Vestments. Print it in Translucent PLA and make it into a ghostly light. There is a bit of an opening in the back to let an electric cord slip under the model.
Wydruk około 17,80 €–21,75 € nettoWstępna wycena jednego wariantu
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Recommended to print with 4 walls, Color change at 9.2mm…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 199 mm x 171 mm x 26,8 mm. The dial has a…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Ghost Busters Ghost Trap / Planter / Box / Seed Starter.
Wydruk około 24,32 €–29,72 € nettoWstępna wycena jednego wariantu
Hello, Here is a sexy, busty ghost girl model for you. The figure is beautifully detailed. Spooky for Halloween, yet sexy. Suitable for dioramas or display. The size can be adjusted in your slicer. It works great. It prints very nicely.…
Wydruk około 5,25 €–6,41 € nettoWstępna wycena jednego wariantu
A tiny ghost buddy for a playful Halloween setup! Use back seam position. ✅ Only 9.5 mm tall – the smallest spooky buddy 👻 ✅ Perfect for hiding around the house to surprise friends & family ✅ Works great as part of the Mini Buddies…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
3D printable statue of Jin Sakai Gcode for Prusa MK4 contains manual fillament changes. The statue on pictures was printed with Gcode included here in files. For right collor order put the gcode into Prusa G-code viewer and then change…
Wydruk około 33,26 €–40,66 € nettoWstępna wycena jednego wariantu
My attempt at printing a fellow Redditor's creation. The STL needed to be cut on top and bottom to ensure they are flat, and the print settings have been modified from preset. See the .3mf file I printed. Print instructions Setting:…
Wydruk około 6,38 €–7,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Leaf Looking Praying Mantis. Play around with the orientation. Its going to be a difficult cleanup no matter what.
Wydruk około 3,78 €–4,63 € nettoWstępna wycena jednego wariantu
Hello, Here is a sexy, busty Halloween ghost for your wall or door. The figure is beautifully detailed—it's both amusing and spooky :-D. Spooky for Halloween, yet sexy. Suitable for dioramas or display. The size can be adjusted in your…
Wydruk około 4,11 €–5,02 € nettoWstępna wycena jednego wariantu
Print Settings Material: Prusament Galaxy Black Pla / Gembird - Marble Pla Nozzle: 0.4mm Support: No (If you want.)
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.10mm Brim: No Supports: Yes, organic on build plate only Seams: Back/Rear If you like my work consider Buy me a coffee 😊
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Haptic model for the visually impaired, based on the book " Překvapení skřítka Modrovouska " by Markéta Vítková. Read more about the project on PrusaLab's blog .
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
This is a remix based on the original design of Alex Hatch at https://www.thingiverse.com/thing:557527 and the remix made by Jason Cross at https://www.thingiverse.com/thing:2254250 I found this awesome model and make it as a key-chain to…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Changes: The longer "neck" gives more surface to grip on Sturdier body, to give more strength Description: Tried the original one, was working already good Saw a video where there was a piece of paper attached to the printer to…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena jednego wariantu
🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7539104524838079746 ℹ Discription: This chibi-style Ghostface figure combines playful proportions with the classic horror…
Wydruk około 3,41 €–4,16 € nettoWstępna wycena jednego wariantu
⚫ Halloween Ghosts ⚫ I haven't released any Halloween decor in 2 years. So I decided to make more ghosts with more faces for you to choose from. And you can also change the color of the face. I hope you like the model! ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖…
Wydruk około 3,41 €–4,17 € nettoWstępna wycena jednego wariantu
This is a small decorative ghost figure that has a holder for the base of an electric candle, which causes the whole ghost to glow! (It's based on the dimensions of this: https://www.amazon.com/dp/B06XCTP65H The top/candle part can be…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
The original felt too big for the zipper on my backpack, so I made a smaller version. Everything is adjusted to use the same 4mm paracord and 3x2mm magnets. The magnets should be easy to install by putting them one by one on a flat…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.20mm Brim: No Supports: No Wall generation: Arachne Seam: Rear/Back If you like my work consider Buy me a coffee 😊
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Did this for the trophy competition and decided that this little guy is way too cute to be just a trophy. Now you can just print this little guy. Printed it on a Prusa Mini + with support. It was so satisyfying to remove the support. Have…
Wydruk około 4,38 €–5,36 € nettoWstępna wycena jednego wariantu
Ghostbusters light up sign tree topper for your Christmas tree. Just add an LED light strip and feed the power cable through the stem. For the sign, I attached it with clear tape. Also, it is best to print the sign with white filament,…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
This is a remix based on the original design of Alex Hatch at https://www.thingiverse.com/thing:557527 and the remix made by Jason Cross at https://www.thingiverse.com/thing:2254250 I found this awesome model and make it as a key-chain to…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Don't forget to add a color change at 2mm for the best effect! Credit to Online Web Fonts for the Creepy Ghost image. It is licensed by CC BY 4.0
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Bring some spooky fun to your Halloween decorations with this 2-in-1 Ghost Candy Bowl & LED Decor ! This cute ghost holds Halloween candy in its hollow body, making it a fun and practical decoration for your desk, shelf, or Halloween…
Wydruk około 4,60 €–5,63 € nettoWstępna wycena jednego wariantu
Meet your new spooky companion! 👻 This cute little ghost carries a classic lantern and combines a cozy Halloween atmosphere with an adorable, minimalist design. With its oversized hood, smooth ghostly shape, and large black eyes, this…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu
A ghost I made for the QUBE 500 contest that can attach to the case for decoration year round or to get into the Halloween spirit. I printed the ghost at 0.2mm face down (33m print time). I added supports and they came off cleanly. Could…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
The ghost might enhance interest in brushing teeth by the younger Set. The tree support was reasonably easy to remove.
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
There really aren't enough Moltar themed models on Printables yet. Instead of expecting the world to change around me, I became the change I wanted to see in the world. Here is a fun multi-layer print. One version has slots to glue…
Wydruk około 1,32 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ghost In the Shell SAC 2045 Lithophane has two layers lithophane.
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
A cool decoration that sits on the end or your tables of shelfs.
Wydruk około 2,23 €–2,72 € nettoWstępna wycena jednego wariantu
Hello, Here is a sinister, evil Halloween spirit. A great-looking spirit for display. The figure is spooky yet has a gothic vibe. Perfect for painting. My kids really love these figures and enjoy painting them! :-) Great as a decoration.…
Wydruk około 5,87 €–7,17 € nettoWstępna wycena jednego wariantu
Wall sign for Halloween featuring a pair of ghosts Designed for MK3/S/+ => MK4 with color change. MMU is not needed but makes color change automatic. Layer height changes at 3.75 mm layer height from 0.25 to 0.15 Infill is at 40% to…
Wydruk około 3,63 €–4,43 € nettoWstępna wycena jednego wariantu
mini ghost
Wydruk około 21,40 €–26,16 € nettoWstępna wycena jednego wariantu
Přechody mezi vrstvami jsou 0,02mm pro lepší práci s barvením ve sliceru
Wydruk około 3,48 €–4,25 € nettoWstępna wycena jednego wariantu
Just some spooky decoration for a Linux User Group. I've printed it at both 100% and 75% size, the latter fits better over the LED tealights I have. As usual for 3D printed objects, this should be kept away from open flames.
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
I made a collection of cute little ghosts with a number of expressive options... And shoes! Ghosties are split up into 6 buckets, each corresponding to their mouth type. Each mouth type is combined with 12 eye types, which equates to 72…
A spooky ghost which fits an electronic tea light. Based on my original Ghozty design from last year. The model is 117 mm tall and 90 mm wide and is hollow with thin walls to save on filament and to allow the tea light to shine through…
Stretchy Springy Ghost Toys STL files included for three ghosts: (1)Big Ghost (2)Medium Ghost (3)Baby Ghost Dimensions of Big Ghost: 3 in. x 2.5 in. Dimensions of Medium Ghost: 2.5 in. x 1.5 in. Dimensions of Baby Ghost: 1.5 in.x 1.25in.…
Bring some spooky charm into your home with this cute little ghost tea light holder! 👻 This model is designed to fit perfectly over a small LED tea light candle and creates a cozy glowing effect through its eyes. ⚠ Important safety note:…
The original Ghost mask from Call of Duty MWII. The mask comes with pre-modeled markings. With a 1 mm or 2 mm drill bit you can easily make holes that allow sewing the mask on a balaclava. This will make an exeptionally realistic Ghost…
Among us crewmates don't have a consistent style, and of all the models that I found, non of them was spot on what I had in mind when I think about the Among us crewmates. So I decided to make my own. At first I wanted to make a realistic…
A working replica of the Aztec Death Whistle from Ghostbusters: Afterlife Fixed errors from the original design . Printing Print with the eyes facing up, default orientation. Use support on the build plate only to avoid supports inside…
The original Halloween series designed by HardPrint co. is released! Original super cute design, without support and easy to print. This file is not for commercial use. If you need commercial use, please contact us for license.…
Now available in more sizes The original ghost (OG) is approximately 53 × 33 × 50 mm. It makes a fun little Halloween decoration for a desk, shelf, party, classroom, or wherever you need an absolutely terrifying presence. Print one or…
This 3D model features an adorable ghost, perfect for Halloween decoration. With a cute, kawaii design, this small ghost adds a friendly and not-so-scary touch to any Halloween setup. Easy to print and customize, this ghost is ideal for…
This lil' guy can be printed as separate pieces (support free) or as a single body. Paint in your slicer, or paint with acrylics! 👻🎃 Printed in Overture Matte PLA White, Orange, Black and Green Happy Printing & Stay Spooky! - Overture
Happy Ghosty The Ghost is a cute little decorative figurine perfect to be used as a halloween decoration. Assembly Model comes in three pieces: body, eyes and mouth. Print all of the parts and then glue eyes and mouth to the body with…
Enjoy my work? Find my full collection over on Patreon I modeled three little tea light ghosts for some Halloween decorations. The middle finger model needs supports under its mouth, but the other two can be printed with no supports. I…
Add a sip of humor to your keys with the "Ghost Drinking Coffee Keychain" – a whimsical, easy-to-print accessory that proves even ghosts need their morning coffee. It's a humorous and adorable nod to coffee lovers and ghost enthusiasts…
Ghost for Halloween decoration
If you like this kind of stuff please check my patreon page www.patreon.com/wekster
I started with just the angry ghost earrings version. But I wanted to have some more options so I've added those too. If you are missing a variant, please let me know in the comment section! Dimensions (hwd in mm): 24.95 x 25.65 x 1.3…
Halloween cookie cutters Please don't change the size in the slicer. If you change the size, they will not have a thin cutting edge (0.4mm). Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Resolution: 0.2 Notes: Print…
This is my Flying Bear Ghost 5 PrusaSlicer Configuration Bundle. Settings are made for a fast print, while keeping good quality. PLA is printed at 200° C with printbed at 60° C and PETG is printed at 220° C with printbed at 60° C. If you…
We’re kicking off this year’s Halloween season with a cute little ghost. The model is simple to print, requires no supports, and is compatible with an LED tealight or a small light source that can easily be placed inside. The model has…
Hollow ghost statue. Designed in Fusion360. Printed without supports with Prusament PETG.
After the success of the Ghost Booh for Halloween 2022 https://www.printables.com/fr/model/291519-ghost-booh You will love The Ghosts Booh crocheted for this Halloween 2023 ! This time 2 different versions : With or without a smile And of…
Halloween Ghost made from a Blender cloth simulation! Great for decorating your home for Halloween! The inside is hollow, allowing for an electric tea light to sit inside the ghost! Works with electric (fake) candles - DO NOT USE real…
A ready-to-solve twisty puzzle box. No glue, no hardware, and no assembly! Update (Sept 27th 2023) The “Print-in-Place Difficult.3mf” file has been updated to fix an internal collision with the core. https://youtu.be/FJXxZtWEMqw…
Inspired by "Ghost by Desktop_Makes" wonderful ghost, here are 13 Halloween Ghost decorations that contain an LED tea light in the base. Print Settings Printer: Troodon Rafts: No Supports: No Resolution: 0.3 Infill: doesn't matter…
This model is a perfect addition to you yearly festive decorations, it can be scaled up as much as you want and is perfect for butting an electric tea light inside of. WARNING: do not put real candles inside because they might set the…
created 2 lego ghosts (2588 and 10173) 1:1 scale intended to be printed for larger minifigures. Accessories made from scratch and work just like the real deal. I have provided both a split and full version in case your 3d printer can…
Halloween Ghost Duck 2 Color AMS, MMU or, ACE Pro Commercial License Membership Available in Bio
Booenchy, the Halloween Ghost Benchy. You can even put this costume over your Benchy and transform into a hilarious and haunting specter. With draped cloth and perfectly placed eye holes, Booenchy captures the timeless charm of a classic…
👻 Dachshund Ghost Under a Sheet with Space for an Electric Tealight • Design & Style: This model features a stylized dachshund completely covered by a flowing sheet, designed to resemble a ghost. The sheet has gentle folds and waves that…
A Mario style ghost floating around, suspended by his enormous tongue! Haha Check here for the King Boo M&M stash pot version, https://cults3d.com/en/3d-model/art/king-boo-m-m-container-stash-pot Been wanting to design this ghost for…
👻About Enjoy the Spooky season with a zombie ghost friend. Scare your family away with your little ghost keychain. This little ghost will always be looking for some brain so be on the watch! Check out all the other spooky 3D designs I…
Build your own little ghost crowd! This collection includes nine draped-sheet ghosts, each with a different expression, from a cheerful smile and heart-shaped eyes to an angry glare and a dramatic scream. Display them on a shelf, decorate…
[Updated 2024-10-29: Added new links to related models in notes.] Check out my Jack-o'-lantern OR Ghost tealight holder design that can be found here: Jack-o'-lantern Tealight/Figure - Halloween Pumpkin Decoration Ghost Tealight…
Meet the Ghost Pumpkin Clicker 🎃👻 – a cute Halloween-themed desk fidget featuring a happy little ghost popping out of a carved pumpkin. It’s small, fun to print, and gives a satisfying mechanical click every time you press it. 🖱✨ The…
Meet Boo and Boozer, the cutest ghost duo around! Boo loves taking his ghost dog, Boozer, for spooky strolls under the moonlight. Together, they bring a dash of spooky fun to your collection! Join our Patreon to get a Commercial License…
Little ghost printable without supports. The spirit is modified so that it can be printed without supports and very easily. It is possible to change the speed according to your needs. The model can be set to infill 0% with 3 perimeters.…
Remixed ghost pumpkin from overture, adjusted for a tea light to create a spooky look, great for halloween decoration. White body part needs some supports in the middle Stem can be glued into the top If you want to support me or get…
Mein erster Druck hat gut funktioniert.
Cat and dog ghosts for Halloween decoration. Can be illuminated with LED tealights or using glow in the dark filament.
Skull Ghost Bride Planter Vase Would really appreciate it if you would download this model and “like” it. Thank you in advance for you support. Semper Fidelis.
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
