Wyniki wyszukiwania: instax

Sortowanie

370 modeli

P
PrintablesChrisfu

Instax Mini magnetic fridge frames

===Update=== Stand added ===Update=== Instax Mini Magnetic Fridge Frames, with an overall thickness of only 3mm. I recomend the textured sheet for a shiny surface finish. The frames can be equipped with magnets (6mm x 3mm x 1.5mm) to…

Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
215
Polubienia
92
Ocena
5
P
PrintablesSonny13

Card holder mountain Berg instax picture

Print both parts an insert the clip into the base. Depending on the thickness of your card you can use the prefered slot in the base. Display your favourite card or picture. To fit the clamp in the slot it might be easier if the corners…

Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu

Pobrania
97
Polubienia
17
Ocena
0
P
PrintablesEgg Plane Man

Standard for lace or (Instax) photo's

my wife made this lace and asked if I wanted to design a stand. After it was finished I also saw possibilities to use it as a photo stand for photos of, among others, Fuji film instax photos I included the FreeCad File so you can adjust…

Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
6
Ocena
0

The Simplest Instax Polaroid stand

Print upright (like the .STL) Add a brim! Enjoy printing :)

Pobrania
5510
Polubienia
2079
Ocena
5
P
PrintablesDylanRyanDesign

Stand for Instax Polaroid Fujifilm Photos

Simple and Minimalistic Polaroid photo stand Designed this to accommodate some of the dozens of polaroid photos we have laying around the house, prints quickly and looks good in numerous colours. The stand holds the photos at an angle…

Pobrania
2244
Polubienia
492
Ocena
4,96
P
Printablesnoahrr

Instax mini picture holder

small picture holder for instax mini photos can be mounted to the wall with a small nail or put on a desk or shelf with the stand. I have also included a mount that holds standard 4x6 pictures the stand also works with 4x6 pictures in…

Pobrania
988
Polubienia
960
Ocena
5
P
Printableserktheoger

Instax Mini Evo Lens Cap

The cover fits within the standard instax cover, the cover does close completely on the magnet. Printed using voron2.4 Magenta esun ABS, 0.4mm nozzle, print with brim (recommend 3mm), print face down

Pobrania
957
Polubienia
74
Ocena
5
P
PrintablesRohweron

Instax Photo Frame

I made this small Instax photo frame with which you can easily swap photos and which hides the borders of the picture. Printed with: 0.16mm Layer 2 Wall loops 35% Cubic infill (infill can be reduced but i decided to go with a higher…

Pobrania
850
Polubienia
201
Ocena
5
P
PrintablesDimmu_Ogir

Flap frame (flipbook) clock for instax-polaroid photo

A very cool photo frame clock for Polaroid/Instax photos. Can hold 30 photos Using Arduino you can automatically rotate and change photos Assembly instructions: Inside Components "3 L mount" & "3 R mount" there is a channel to lay the…

Pobrania
847
Polubienia
930
Ocena
3,83
P
PrintablesGruensil

Polaroid frame (Instax)

Simple print in place frame for polaroid photos (tested with instax fujifilm). Just slide the photo into the frame and you are good to go! It has a very stable stand (that annoyed me about other models). No supports or brim needed For…

Pobrania
829
Polubienia
104
Ocena
4,5
P
PrintablesMakerDAD

Fujifilm Instax Mini Triple Photo Frame

This is a modified version of the "Instax Photo Frame" by o0aaron0o, you can display 3 photos instead of one. Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor

Pobrania
795
Polubienia
155
Ocena
5
P
PrintablesShared Objects

Instax Photo Frame

Display your Instax prints on the wall or tabletop in either portrait or landscape mode. Swapping prints is easy with the dovetail style slider and nested cavity. Print instructions Category: Decor Summary Display your Instax prints on…

Pobrania
785
Polubienia
214
Ocena
4,71
P
PrintablesRT3D

Fujifilm Instax Mini Photo Frame Stand

I created a stand version from my Christmas tree hanging photo frame found here. Reference: https://www.prusaprinters.org/prints/93150-instax-mini-photo-frame-tree-ornament Add the photo and place wherever you like. Update: 06/06/2022…

Pobrania
780
Polubienia
111
Ocena
4,88
P
PrintablesRADdesign

Instax Mini Rotary Photo Album

Rotary Photo Album The Rotary Photo Album is designed to store Instax Mini Photos. Turning the device simultaneously lowers pictures while raising new ones. Prints I printed this on my Bambu P1S. I tested that the top and bottom could be…

Pobrania
745
Polubienia
281
Ocena
5
P
PrintablesJayFiDev

Instax Mini Picture Frame - vertical & horizontal

Update - still finetuning the model, but current stl is okay to use! Update - 03.12.2017 - Update Model with smaller tolerances! Small project to generate a picture frame for my new Instax Mini Camera. Designed to be used horizontal and…

Pobrania
702
Polubienia
106
Ocena
4,89
P
PrintablesMakerDAD

Fujifilm Instax Square Photo Frame

I couldn't find any frames for the Instax Square Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor

Pobrania
643
Polubienia
114
Ocena
5
P
PrintablesSPRKPLG

Mamiya Press or Polaroid 600SE to Instax Wide 300 Adapter Kit

Update 3/31/23: Added version for Polaroid 600SE lenses. ---------- Update 1/18/2022: Made some improvements to the lens locking method for a much more secure shooting experience. The screw is now no longer a set screw, just a lock screw…

Pobrania
621
Polubienia
39
Ocena
5
P
PrintablesVictor

Instax Square Photo Box

Keep your photos organized and protected. Has 5 separate compartments so the photos will stay upright. Will fit 5 x 17 photos. Print with flat sides on the print bed. Printed at 0.2mm layer height.

Pobrania
586
Polubienia
101
Ocena
5
P
Printables_FirstLayer

Instax Wide Photo Frame

I really like the sleek design of the Instax photo frame by Shared Objects . The orignal design only fits the Instax Mini, but Instax film is available in 3 formats, Instax Mini, Square and Wide. I remixed it to also fit the Instax Wide.…

Pobrania
535
Polubienia
96
Ocena
4,17
P
PrintablesLyraNgalia

Instax Mini 12 Flash Cover

A quick and dirty flash cover/diffuser for the Instax Mini 12, which sit more flush against the camera body than the Instax 11. This cover sits flush against the flash, and does not ‘snap’ on securely. I prefer using a removeable adhesive…

Pobrania
502
Polubienia
12
Ocena
0
P

Case for Instax Mini

4/XXX Instax Mini Case I'm doing a challenge where I'll upload 1 model a day until I reach 10k Prusameters or more so I can own a PrusaMini or PrusaMK4 This is a case for Fuji Instax Mini Photos. It features a snap-fit cover and can hold…

Pobrania
481
Polubienia
112
Ocena
4,83
P
Printablesd00kie

Instax mini Holder

Simple and quick to make Instax mini holder. My plan was to make something minimal and stable. Gcode provided for Ender 3 V3 SE; Material: eSUN PLA + Nozzle: 0.4 Temperature: 210/60 Layer height: 0.10 Print time: 12min

Pobrania
479
Polubienia
76
Ocena
5
P
PrintablesKyne

Skadis Photo Clip (Instax, Polaroid, Instant Photo)

A tiny clip for your Ikea Skadis to hang up your beloved photos. I used it for photos created with the Fujitsu Instax Mini. I'm sure you can use it for any instant/polaroid camera. Make sure to print it sideways with support.

Pobrania
466
Polubienia
89
Ocena
5
P
PrintablesKaJashey

Instax mini EVO 52mm filter adapter

An adapter to use 52mm filters with an Fuji Instax mini EVO. It just pushes onto the lens barrel. A previous design was too tight and could pull off the lens barrel when removing the print. CAUTION: to remove use your thumbnail to push…

Pobrania
441
Polubienia
50
Ocena
0
P
Printablespathetap

Instax Mini (11) Door Clip

This is a removable replacement clip for the Instax (11) Mini Polaroid door. The original clip is pretty prone to breaking as it is made of a thin flexure. This one is heavily inspired by the original design, which I emulated based on…

Pobrania
431
Polubienia
14
Ocena
0
P
Printablesnerologic

Instax Wide Scanning Frames- Get Even Borders and Prevent Newton Rings

I shoot a lot of Instax, especially now that I adapted a LomoGraflok back to my Graflex SLR, and I like to scan the film for sharing or before giving away the unique physical copies after shooting portraits. I designed this frame to save…

Pobrania
407
Polubienia
74
Ocena
5
P
PrintablesBobby

Instax Photo Frame

I wanted to have a picture of my family on my desk at work, so I created this simple Instax photo frame. Prints at 0.2mm, no supports, Prusament Galaxy Black PLA. UPDATE: [03.03.2024] V2 Design available with bigger clearance and extended…

Pobrania
395
Polubienia
88
Ocena
5
P
PrintablesMakerDAD

Fujifilm Instax Wide Photo Frame

Fujifilm Instax Wide Photo Frame I couldn't find any frames for the Instax Wide Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only.

Pobrania
385
Polubienia
47
Ocena
5
P
PrintablesCarWalkerMail

INSTAX MINI Photo Stand Frame

Specially crafted model designed for Instax Mini photos or prints around 53x86 in size. Perfectly suited for 3D printing, this piece offers a stylish and unique way to display your memories. Download now and bring a personalised touch to…

Pobrania
357
Polubienia
43
Ocena
5
P
PrintablesSPRKPLG

Big Wide Camera (Big Shot style Instax Wide)

Detailed instructions: https://sprkplg.com/big-wide-diy/ Decided to put that all on a blog as some of it may change, and I will refer to it often on other sites. Original instructions are attached here in PDF form, but they are outdated.

Pobrania
329
Polubienia
44
Ocena
0
P
PrintablesRT3D

Instax Mini Photo Frame Tree Ornament

I created a little hanging photo frame for the Instax minis. Add the photo and hang it on the tree or wherever you like. Print Settings: Printer: PRUSA MK3S Resolution: 0.2mm Layer Height (0.4mm Nozzle) Filament: PLA Supports: Optional…

Pobrania
328
Polubienia
83
Ocena
5
P
Printables_FirstLayer

Instax Square Photo Frame

I really like the sleek design of the Instax photo frame by Shared Objects . The orignal design only fits the Instax Mini, but Instax film is available in 3 formats, Instax Mini, Square and Wide. I remixed it to also fit the Instax…

Pobrania
325
Polubienia
60
Ocena
5
P
PrintablesBenjamin Story

Instax Mini-Fotorahmen mit Disneys Mickey-Mouse-Ohren

Darauf bitte bitte keine kleben draufmachen/weil wenn du das foto aufmacht klappt das nicht deswegen besser ohne kleben ok Dankeschön euch alle !!

Pobrania
318
Polubienia
84
Ocena
5
P
PrintablesFab5

Polaroid Frame and Box for Instax mini

This is a smaller version of the polaroid display box. I printed this at 0.2mm with 20% infill and 3 walls. No support or adheasion needed. There is a little wider option for storing more polaroid pictures.

Pobrania
317
Polubienia
55
Ocena
5
P
PrintablesVasichkin

Frameless card holder, Instax, Polaroid photo stand

It's another minimal frameless stand to place your Instax, Polaroid pictured. It will work for photos and cards too. It has curved profile, so big pictures will stay straight. Print takes from 15 min and requires from 4g of plastic 4…

Pobrania
314
Polubienia
55
Ocena
5
P
PrintablesAndre Stadler

Instax Mini Photo box

Print with flat sides on the print bed. Printed at 0.2mm layer height. Keep your photos organized. Uploaded also a version without the text as requested. Big model is twice the size of the first one.

Pobrania
291
Polubienia
69
Ocena
5
P
Printablesdiyit

Instax Mini Magnet Frame

Print model with PLA, PETG, ABS using 0.2 layer height, 15% infill. I use 0.6mm nozzle but 0.4 will also work. Prints without support. You will need 2 small magnets per frame: 5 mm in diameter and 2 mm thickness. You can get them cheap…

Pobrania
286
Polubienia
71
Ocena
4,67
P
PrintablesANTALIFE

Modular instax mini Frame

Had too many pictures from the recent travels, so decided to make a modular frame to hold them up. If printed in PLA would recommend using super glue to fix all pieces together, otherwise if in ABS then acetone would work To fit instax…

Pobrania
277
Polubienia
87
Ocena
4,5
P
Printablesitsleon

Fujifilm Instax mini Film / pic box V2

A Box for films and instantpics for Fujifilm Mini V2: tighter pressfit

Pobrania
268
Polubienia
99
Ocena
5

Instax mini 12 flash cover

Instax mini 12 flash cover Category: 3D Printing

Pobrania
261
Polubienia
8
Ocena
5
P
PrintablesYeet

Lubistax - TLR instax

Non destructive modification for Lubitel 166B camera to turn it into instant camera. Uses Instax square cartridges. Check notes for each file. Except a few files, all should be printed without supports. Use at least 3 walls and 20%…

Pobrania
260
Polubienia
44
Ocena
0
P
PrintablesHeidi Makes

Instax Camera Frame Display

This model was designed to be a table display for Instax Frames. It can be used together with my Instax Frame and Keychain model or with standalone Instax frames. Printing Advice This model requires a little bit of support on the camera…

Pobrania
259
Polubienia
50
Ocena
5
P
PrintablesB2000

Simple Instax Mini Stand

This is a minimalistic and easy to print stand for pictures that are taken on Instax Mini instant-film. The cutout on the front is deep enough to make room for the text on film that features the contact-sheet-look. Update: A longer…

Pobrania
254
Polubienia
45
Ocena
4,8

Polaroid/Instax photo holder HEARTH

Hello guys, I was tired of my Polaroid photos being on desk laying so I decided to make this holder which is modular and I will add more modules besides heart. This print only takes a few seconds and will be a great addition to your desk…

Pobrania
253
Polubienia
46
Ocena
5
P
PrintablescRckls

Instax mini modular wall frame

I wanted a frame for Instax mini photos that: held a lot of photos minimal amount of frame covering the photos easy to get photos in and out, but held them securely could be hung on the wall These are modules of 6, which is the maximum…

Pobrania
235
Polubienia
78
Ocena
5
P
PrintablesBigfoot Lukas

Instax Polaroid frame

Print 0.1mm. Supports for the photo exchange hole.

Pobrania
220
Polubienia
43
Ocena
5
P
PrintablesFunFam3D

Gnome Instax Mini Picture Frame

Gnome themed picture frame for Instax Mini pictures. Support probably needed for inside of frame. 3mf and STL files available. *Update to Version 3 with 75% smaller file size *

Pobrania
215
Polubienia
70
Ocena
5
P
PrintablesBryn Parish

Instax Mini Photo Album!

This small Instax Mini photo album is perfect for storing your photos safely and conveniently from each vacation! Create little booklets for all of your favourite memories, one for each trip! Choose between either the hard cover (solid…

Pobrania
214
Polubienia
118
Ocena
0
P
PrintablesBosman_27

Photo frame - instax mini

Zdjęcia INSTAX mogą nabrać nowego przeznaczenia.

Pobrania
205
Polubienia
27
Ocena
0
P
PrintablesJohnM

Instax mini & Polaroid go photo film holders / stand / frame

Simple little holder for instant pictures

Pobrania
205
Polubienia
26
Ocena
5
P
PrintablesEMarrs

Instax Mini Magnetic Frame

Magnetic frame for fuji instax Mini photos. No supports are needed. Print with backside flat against the bed. To insert a photo, bend it slightly so it catches the notches, then push it flat. See post it note in photo for reference. To…

Pobrania
203
Polubienia
47
Ocena
5
P
PrintablesOdbix

Minecraft nether portal instax photo frame

This model is designed to fit an instax square photo. The portal is split into 2 parts so it can be printed without supports, but this means you have to use glue to attach the top bar with the portal body. Sadly, I don't have an Instax…

Pobrania
202
Polubienia
106
Ocena
0
P
PrintablesTurbopstros

Valentines Heart Picture Frame | Instax Photo Stand

A minimalist double heart picture frame designed for instant and classic photos. This model works great with Instax photos, Polaroid photos , and standard printed photos that fit the slot. The upload includes two different heart designs…

Pobrania
199
Polubienia
47
Ocena
5
P
PrintablesSPRKPLG

Lomograflok Instax Square Mod

Go with your trusted material and settings for small flimsy parts. I used Prusa CF PC blend, and Priline CF PC. PETG should work fine. Haven't tested with actual photos yet but spring tension seems good, and test frames eject from both…

Pobrania
199
Polubienia
42
Ocena
0
P
PrintablesJakJak

Rugged box for instax square

I wanted a travel box for storing instax square photos. Close the lid and throw them in my bag without worry. I removed the second latch and hinge as it seems superfluous for a box this small. Also is easier to open. And saves on screws…

Pobrania
199
Polubienia
39
Ocena
0
P
Printablesmloska

Universal Instax Mini Modular Frame

These models allow you to create your own unique desk or wall frame for Instax mini photos. Their modular design makes it easy to expand with each new picture you capture It will work with both for horizontal or vertical pictures.…

Pobrania
196
Polubienia
56
Ocena
4,67
P
PrintablesMyGeekyMuse

Magnetic Photo Frame (Polaroid/Instax style)

Size: 72 mm x 86 mm x 3 mm Recommended picture size: 66 x 66 mm (Picture window size: 62mm x62 mm) Holes size: ø 10.2mm x 1 mm - Use strong magntes ø 10 mm (1-2 mm thick) Used print settings 0.20mm, PLA (White) Infill: 15%

Pobrania
194
Polubienia
62
Ocena
0
P
Printableskscarlett

Instax Wide Photo Box

Like Victor's original, it has 5 separate compartments so the photos will stay upright. Will fit approximately 5 x 17 photos. It should realistically print at any layer height - it's just a box with no overhangs or intricate details.

Pobrania
193
Polubienia
33
Ocena
5
P
PrintablesAmoda

Modular Frames for Small Photos (Instax)

Description: I designed this modular frame system because I wanted an easy to change and design format for my instax photos. For me this design needed to: Have a bit of wall presence. I wanted to make the frames thick enough to sit…

Pobrania
192
Polubienia
83
Ocena
0
P
Printablesjavier crespo

Marco fotos instax mini

Marcos de fotos para las láminas de la instax mini.

Pobrania
189
Polubienia
21
Ocena
0
P
PrintablesJakJak

Compact parametric box (for instax square)

Parametric box for protecting instax photos. 28mm width fits 20 shots, 42mm fits 30 shots, and so on. Less rugged than what it is remixed from, but more compact. I've kept previous design iterations, but I recommend using the latest V3…

Pobrania
187
Polubienia
30
Ocena
0
P
Printablesla goose

GUESS WHO: Instax mini edition!

Ok here is the deal, I have taken, the classic game GUESS WHO and produced a version that you can play at parties, Step 1: take a picture of your friends. Step 2: assemble the game board. Step 3: try and guess who the “best” friend…

Pobrania
185
Polubienia
57
Ocena
5
P
PrintablesPat

INSTAX mini PHOTO FRAME

I saw this kind of frame design for instax mini photos somewhere. Again, I spend some time in Fusion 360 and WALA… I printed with PETG-CF and turns out quite nice. Nothing special for printing really. You just need to remember to use…

Pobrania
181
Polubienia
82
Ocena
5
P
PrintablesSasPes

INSTAX frame for 5 pictures

INSTAX frame for 5 pictures ... 2 horizontal & 3 vertical .. or vice versa ... Remixed from: Modular INSTAX Frame https://www.thingiverse.com/thing:3817814 Designed by: ANTALIFE https://www.thingiverse.com/ANTALIFE Print Settings Printer…

Pobrania
176
Polubienia
25
Ocena
0
P
PrintablesSir Cheese

Instax Mini Box Insert for Pokemon Mini Tin

A simple storage solution for your Instax Mini photos for those that have Pokemon Mini Tins laying around. And if you have been printing New Pokemon Snap photos using the Fujifilm Instax Mini Link, this is the perfect themed box to hold…

Pobrania
174
Polubienia
30
Ocena
5
P
Printablesmarekschmitt

Instax Mini Film stand

This stand is designed for Instax Mini Films with a width of 54mm. The polaroids fit perfectly into the slot. The model should be printed on the side for the best results.

Pobrania
168
Polubienia
36
Ocena
5
P
PrintablesB2000

Simple Instax Square Stand

This a wider version of the Simple Instax Mini Stand so it can be used with the larger Instax Square instant-film. The print in the picture is printed with a Creality Ender 3 printer with PLA Filament and sliced with Cura default settings…

Pobrania
167
Polubienia
30
Ocena
5
P
PrintablesOcelotzlasu

Vase mode photo stand - Instax & Polaroid

Simple instant camera photo stand, meant to be printed in vase mode (doesn't have to be). Change the scale on Z axis to adjust the width: Instax: Mini - 53mm Square - 71mm Wide - 108mm Polaroid: i-Type/600/SX-70 - 88mm Go - 54mm If you…

Pobrania
166
Polubienia
48
Ocena
5
P
PrintablesStevanastardust

Easy Print Instax Mini Photo Frame

I designed this frame to be a super easy print on any printer. Many of the Instax mini frames on Thingiverse have a bar up on top like a conventional photo frame but this always made them challenging to print correctly. I decided to…

Pobrania
164
Polubienia
26
Ocena
0

Instax Mini Scanmask

Scan your Fuji Instax Mini photographs easily and aligned on a flatbedscanner, 6 at a time with this scan mask. Top part is clamped to the baseplate with 32pcs of 3x1mm Neodymium magnets. Also available for APS film and Polaroid: APS:…

Pobrania
161
Polubienia
36
Ocena
0
P
Printablescwollman

Instax Mini Picture Frame

This ordinary print was nice and handy so I entered it into this contest and it was my first enter ever . Printed with the bottom side down. You are going to have to orientate the print in the slicer.

Pobrania
160
Polubienia
42
Ocena
5
P
PrintablesVec4

Fujifilm Instax Mini/SQ/Wide Film Carry Case

Prints in place without supports. Fits around 25 films.

Pobrania
159
Polubienia
24
Ocena
5
P
PrintablesCalarok

Fujifilm Instax Mini - Wall photo picture frame

Hi! I didn't find some nice easy to print simple picture frame for Fujifilm instax mini so i draw 5 models. Really easy to print. You can print the 5 frame on a MK3S in one print with no skirt. Their hole in the back to hang them on some…

Pobrania
158
Polubienia
50
Ocena
0
P
PrintablesSGV

Instax Mini Photo Magnetic Frame (no supports, no glue, gridfinity size magnets) STL STEP

Magnetic frame for your instaxmini photos. Uses 6x2mm magnets. Press in photos to lock them in place. 6x2 is also the same size magnets that gridfinity uses for its grid plates so you may have some laying around already. Magnets can be…

Pobrania
158
Polubienia
25
Ocena
5
P
PrintablesHeidi Makes

Instax Frame and Keychain

Instax photos are really cute and make for a nice little present when you meet with friends and family that you dont see in a long time. I designed these little frames to turn an Instax into a little present I can give to my loved ones,…

Pobrania
157
Polubienia
29
Ocena
0
P
PrintablesBuck Walker

Instax Mini Film Storage Box & Display Frame for Photos

Here is a simple little storage box with a display frame on the front.

Pobrania
147
Polubienia
39
Ocena
5
P
Printablespachek
Pobrania
140
Polubienia
50
Ocena
5
P
PrintablesPsykaze

Instax Mini Storage Box

Keep your cherished Instax Mini photos safe and organised with this stylish 3D printable storage box. Designed specifically to fit Instax Mini photos, this box ensures that your memories are well-protected and easily accessible. Key…

Pobrania
140
Polubienia
16
Ocena
5
P
PrintablesKaJashey

Instax Mini Evo Filter adapter 49mm

Allows you to use 49mm lens filter on an instax mini EVO camera. You can use colored filters, or a UV filter, or close-up filters, or a lens hood, or a step up ring. I print with organic supports to hold up the inner edge. Easier to pull…

Pobrania
139
Polubienia
30
Ocena
0

Fuji Instax Flash Diffuser for SQ1 Instax Mini

I design and made this for out door instax shots. For close up shots where the flash just over power the shot. Can be use for flash block or diffusing. You will need double side tape or velcro to secure to the camera. for diffuser i use…

Pobrania
138
Polubienia
19
Ocena
2
P
PrintablesOcelotzlasu

Thin Instax Photo Frames - all sizes

Thin frames for Instax photos. There are versions for Instax Mini, Square and Wide Use a bit of heat to bend the leg backwards to make the frame stand upwards The photos slide right in from the top Check out the simple photo stand or the…

Pobrania
137
Polubienia
28
Ocena
5
P
Printablesjkap

Instax Adapter for Vintage Kodak Instant Cameras

Re-upload from https://www.thingiverse.com/thing:6678393 Designed by Photochemicals. Please refer to the thingiverse link for instructions!

Pobrania
137
Polubienia
23
Ocena
0
P
PrintablesDavidB75

RB67 Mask for instax square back

This aid makes it clear where the boundaries are when shooting Instax Square on RB67. Printed in Polycarbonate for strength and durability. Layer height: first layer 0.2mm, succeeding layers 0.05mm Temp: 225 (Polymaker PC-MAX) Bed: 100…

Pobrania
136
Polubienia
18
Ocena
0
P
PrintablesNiecov

Magnetic Instax Mini Case

A simple and easy to print slide in case for your instax mini pictures. I really like to use them as fridge magnets. This way the magnets will never damage your pictures. It has a built in support but as a separate object if you would…

Pobrania
135
Polubienia
42
Ocena
5
P
PrintablesMarkTheMaker

Printable Photo Album For Polaroid 600, Fuji Instax Square, Fuji Instax Wide, Fuji Instax Mini

Introducing the Universal Instant Photo Album, designed for a wide range of instant film types including Polaroid 600, Fuji Instax Square, Fuji Instax Wide, and Fuji Instax Mini. This album offers a practical and straightforward way to…

Pobrania
135
Polubienia
39
Ocena
0
P
Printablespolicecaprice

Instax square adapter for Kodak instant cameras

Nozzle: 0.4, layers: 0.2 . This is a prototype, I will not develop it further, because 3 adapters work perfectly for me. You also need springs, sheet metal, sheet metal scissors, a file, sandpaper, a screwdriver and small screws and…

Pobrania
128
Polubienia
29
Ocena
0
P
PrintablesVec4

Instax Mini Film Carry Case V2

Instructions The body is easy to print, so print it with your usual speed settings and 2-3 walls. The lid will need to be printed slower (at least for the hinges) to allow for adequate cooling at each hinge, so print that at around 50mm/s…

Pobrania
127
Polubienia
26
Ocena
5
P
Printablesalexcocan

Fujifilm Instax mini 11 shutter button cap

I got a fujifilm instax mini 11 as a christmas gift. The buttons included with the camera did not stick on the double sided tape they came with, so I fired up Fusion360 and after 30min of modeling and 10min of printing I got this. Because…

Pobrania
125
Polubienia
7
Ocena
0
P
PrintablesLeo

InstaX Polaroid Frame (For 86mm x 54mm film)

This is a polaroid stand designed for InstaX 86mm x 54mm film. It stands up and displays pictures nicely that you can put on your desk or anywhere else. The polaroid goes in through a slit in the top of the frame. Prints fine without…

Pobrania
125
Polubienia
16
Ocena
5
P
PrintablesFunFam3D

Instax Mini Picture Frame

Standing frame to hold Instax mini photograph with cute hearts and stars.

Pobrania
123
Polubienia
27
Ocena
0

Instax mini We love u picture frame

This is a small picture frame that fits the Fuji Instax Mini perfectly. I hope you enjoy it. I would love to hear feedback and, better yet, see your prints. I am currently working on a two-color version as well. Printed with .4 nozzle…

Pobrania
121
Polubienia
26
Ocena
0
P
PrintablesBearded Printer

Instant Camera Picture Frames - Instax Mini, Square, and Wide

Update Feb 24, 2024: Updated frames so picture would be more centered vertically. Update Feb 23, 2024: Updated frames to increase clearance for better fitment of photos. No supports! The mini, square, and wide frames were designed for the…

Pobrania
121
Polubienia
47
Ocena
0
P
PrintablesCelta

Wedding Instax Photo Frame

This elegant wedding-themed Instax photo frame is the perfect way to display cherished memories from the big day. It features a beautiful floral pattern design and a dedicated space to add the wedding date, making it a unique and…

Pobrania
118
Polubienia
33
Ocena
0
P
PrintablesMagnetoduck

Lomograflok Instax Back Modified Focusing Screen Spacer for Speed Graphic

This is a modified version of the standard 19.5 mm ground glass spacer that comes with the Lomograflok Instax Wide Film Back. This should allow you to achieve sharp focus at wide apertures with a Speed Graphic that has a Fresnel focusing…

Pobrania
115
Polubienia
20
Ocena
5
P
PrintablestheXorios

Instax Fujifilm frame for Ikea SKÅDIS

Small simple frame that is compatible with Ikea Skadis system. Photo dimensions: 86*54 mm. Available in both directions.

Pobrania
115
Polubienia
32
Ocena
0
P

Whiteboard Memories (Instax) and Pen Holder (Parametric)

Whiteboard Memories and Pen Holder Introducing the Whiteboard Memories and Pen Holder, designed to keep your workspace organized and personalized! Featuring a unique front slot, this pen holder allows you to easily showcase your favorite…

Pobrania
112
Polubienia
40
Ocena
0
P
Printablesacornelissen

Instax wide ground glass cartridge

This is a simple printed instax wide cartridge designed around a Pentax 67 focusing screen from a broken viewfinder I had lying around. I use it to help with finding infinity and rangefinder calibration for my 110 conversions. I've…

Pobrania
110
Polubienia
18
Ocena
5
P
PrintablesSamthing_else

Instax Wide 300 Battery Cover

This is a very rough design for the battery cover on the Instax Wide 300. I lost the cover a while ago and finally got around to crudely designing one. My experience with CAD software is extremely limited, but this does the job. You won't…

Pobrania
109
Polubienia
5
Ocena
0
P
PrintablesRandomFilament

Instax Mini Polaroid Scan Adapter

I made this to be able to scan my Instax Mini pictures in a convenient and quick way while avoiding Newton Rings. It aligns all pictures perfectly on the horizontal and vertical axis to easily be cropped. You will lose 1mm of the white…

Pobrania
108
Polubienia
14
Ocena
0
P
PrintablesJe4nh4

Instax Magnetic Frame

Designed to fit 6x2 neodyme magnets. Printed in two parts : insert thé magnes in the base, place your picture on it and secure the whole by cliping the frame on top. Voilà ! ~5g and ~30min printing Depending on the surface you put it, and…

Pobrania
108
Polubienia
36
Ocena
5