1345 modeli
This is an stand for an latop iPad and an e-book with al hexagonal pattern. There is also a solid version if you prefer a cleaner look. If you want to modify it to fit perfectly on your devices follow these steps. Measure the width of…
Wydruk około 7,95 €–9,71 € nettoWstępna wycena jednego wariantu
iPad Halter in einem geschwungenen Design. Auf den Bildern ist der Halter mit einem 12.9 Zoll iPad Pro zu sehen. In der Mitte habe ich den Halter ausgenommen, damit mit dem Finger der Bildschirm nach oben gestreift werden kann. Der Halter…
Wydruk około 9,23 €–11,28 € nettoWstępna wycena jednego wariantu
Print Instructions: 2 Perimiters 15 % Cubic-Infill Brim on No Supports Needed Hardware: 4x M4 Screw 4x M4 Nut Changelog: v2: Add Cutouts for USB-C Port
Wydruk około 9,50 €–11,61 € nettoWstępna wycena jednego wariantu
Made with Tinkercad to hold up a iPad or Tablet.
Wydruk około 3,37 €–4,12 € nettoWstępna wycena jednego wariantu
Last update: 20.5.2024
Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Erste Schicht mit 0,4 mm gedruckt ist dünn genug, um die Halterung zwischen der magnetischen Hülle und dem iPad fest zu klemmen, festkleben ist nicht notwendig…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
So if you're a user of Heges or a 3D scanner that uses the TrueDepth camera you must hate how you have to hold the iPad towards the subject and not even being able to see it, well this will fix that issue, just place a 2.5mm mirror on the…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a solution to easily and quickly switch between a Wheel and two ipads Mini 4 on a simrig. The holepattern to fix it to the simrig is 4040 (most commenly used to build Simrigs) I use this to switch between simracing and playing…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small form factor IPad/Tablet stand for your Ikea SKADIS wall utilizing the T-Nut mounting system . Print orientation should be on the side, might need a brim to stay on the buildplate. I added some foam to the stand to keep the IPad from…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
Keyguard for TD Snap PODD 15 on 11th gen 2025 iPad
Wydruk około 3,63 €–4,44 € nettoWstępna wycena jednego wariantu
Bei meinem Ergometer stört sehr, das zwar ein Halter für ein iPad vorhanden ist, bei dessen Verwendung jedoch das Display des Computers verdeckt wird. Wer denkt sich so etwas aus ? Hier meine Lösung: Am Lenker wird links/rechts je ein…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tablet holder, perfect for typical tablets like Apple Ipad 11". Fixed on a normal tripod thread. Print Settings · model in photos printed with MK4 | Extrudr XPETG | 0.4 mm nozzle.
Wydruk około 4,27 €–5,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Für Tablet und iPad. Der stand ist 20cm breit.
Wydruk około 7,89 €–9,65 € nettoWstępna wycena jednego wariantu
I found the ESR Ascend for iPad Pro 11” M4/M5 for cheaper and higher quality than anything else. But my iPad Air 5 doesn't fit into the inner case supplied. So I had set out capturing the details of the case, including the magnets that…
Wydruk około 3,89 €–4,75 € nettoWstępna wycena jednego wariantu
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
Hey everyone! I designed this IPad stand for my IPad pro 12.9 with 60° viewing angle. As it got more popular, I added more versions to fit different IPad sizes. I would recommend 60° for horizontal, and 70° for vertical IPad orientation…
Yet another iPad or tablet stand. Fits a number of tablets with a screen size of ~10 inch, with case or without. Stable enough to work in portrait mode. Print instructions Should be easy to print when printed laying on its side. Feet are…
Summary This is an improved version of the iPad stand. Here is what I changed: Added the knobs to the inner part to keep it in place when the stand is folded Reduced the gaps between the moving parts to make the model less wiggly Rounded…
I don't like traditional flip folders for iPads, which means I have to resort to a dedicated stand if I want to use my iPad as a second screen on my Mac. The issue with many of the printable stands I've found online is that they're too…
This wall mount was designed around three main criteria: Completely hide a large 3M strip Allow the user to use the camera and home button even with a case that accommodates the apple pencil Allow the print to be made without supports I…
Simple iPad Air (3rd generation) stand. Space is 12mm wide so it fits most iPads even with a case. Buy me a coffee
Quick designed stand for drawing and watching on my iPad
nozzle: 0.4mm layer thickness: 0.2mm fill density: 20% pla, 100mm/s bed: 60 C temp: 205 C
Simple brackets designed to hook onto the headrest shafts to hold an iPad Air. There are two versions, the “Shorter” one is for the iPad without a cover and the “Longer” one is with a cover. Print two copies and hang in the same…
Dieser Halter ist für das ipad erstellt. Er ist klein, stabil, handlich und einfach zum drucken. This holder is made for the ipad. It is small, stable, handy and easy to print.
A two piece stand that works for different types of iPad/iPhone. The halves can be split apart and easily fit in a pocket, and only slot together one way to ensure a nice 35 degree tilt on the iPad and provides a sturdy base for even…
This is a simple iPad stand. The original design is by @whoisjako . The original work is wonderful design, but the hook is too small and unstable for my old iPad, so I modeled a new one. The original design is at this URL.…
You can use this stand to keep your iPad air 2 at vertical or horizontal as per the pictures.
Stand for the 12.9" iPad Pro which works in portrait or landscape orientation. It also works with the iPad Pro 11" and the new iPad Air in landscape. Perfect for watching videos, video conferencing or using it as a second monitor. I've…
Ipad stand, fit multiple sizes. Works for iPhones also. Printed in green PLA, 0,2mm layer.
After trying a few generic online models I designed a holder that would work with newer iPads that are 6mm thick. So far I've been using it without gluing any parts together, they are snug enough to hold it, although a bit of sticky…
This iPad stand can hold 2 iPads and can be easily customizable.
iPad holder for Gen 5 (2017). Will work both vertically and horizontally, and will fit most mic stands and music stands. There are a variety of different sized arms and swivels to fit it to most needs. All are interchangeable so you can…
Ipad mini 6 stand with a little bit of extra space for case. It's nice to have it next to your work monitor.
This is a free standing adjustable stand/mount for iPad Air 2. I needed something for GoToMeeting that didn't have the camera looking up my nose :-) The "ipad grabber" part should go on it's side with supports holding the mounting tab.…
Simple Vesa mount for ipad or android tablet with various size and various screw support (m4,m5,m6). there are three screw variation, m4, m5 and m6. all flat heat, so it can flush without bumping the ipad or tablet. there is short,…
Works for 2022, 2021, 2020, 2019 and 2018 Models :) 11 and 12,9 Inch versions! It is very easy to print (no need for any support if printed in the correct orientation( which is it like the iPad would be inside)) Give me a thumbs up if you…
A modern and timeless design holder for tablets and phones. Stable and stable even for large devices. Supporting Future Works and Commercial License https://www.patreon.com/deltaprints What material do I use for printing?…
Model of a human jaw. Also works as an iPad stand. Print instructions Category: Tablet Summary Model of a human jaw. Also works as an iPad stand.
The Charging Station was designed as a low-cost alternative to commercially available charging stations for our school. The holder/charging station can be made for between $60 and $80 including the feet and power-strip. The center area…
Adaptation of the iPad Pro 12" stand for smaller devices.
IPad Holder rotated for 70°
One evening I was on the rear deck and picked up my iPad Pro and accidentally knocked the Pencil from the magnetic mount on the side of it. The $130 Pencil fell through the spacing in the deck boards and into a damp, dirty crawl space.…
Das Modell benötigt knappe 60g Material, präsentiert ihr Tablet in verschiedenen Winkeln und lässt sich mühlelos ohne (no) Supports drucken. Als infill habe ich 20% gewählt und mit einer 0,4 Nozzle auf 0,2er Schichtdicke gedruck.…
This is a simple iPad stand, it's a little oversized to help stability on softer surfaces like bedding. Fits most iPads with and without cases. Printed in Polymer PolyTerra Purple. Fusion360 and STEP files included.
phone holder for your desk shelf, inspired by balolo cokcpit system. can be used for ipad or android tablet too.
This is a simple iPad stand. I made it so I could view recipes in the kitchen :) It works with iPad mini at portrait and landscape mode. Also tested 10” iPad and iPhone, both held great :)
Inspired by this design: https://www.thingiverse.com/thing:1091637 Created for the Apple USB-C charging cable that came with my iPad Pro (USB-C to USB-C) Used supports only on the bottom part, which houses the connector, had support…
iPad stand, which allows a verical and horizontal position. In vertical position, the charger cable can be plugged in. It should be compatible with virtally every iPad. Printing instruction : Print the stand lying on the left or right…
I designed a honeycomb case for iPad mini 6. After creating many prototypes, I finally finished my masterpiece. It is strong enough to hold the Apple Pencil, and the buttons are easy to press. It can withstand rough handling by children.…
I've printed mine in PLA, it fits perfectly, looks clean & nice. Designed so that the cutouts on the sides follow the shape of the device, making it easer to reach the buttons. v2 is slightly thicker than v1.
This is my iPad Mini 4 wall mount to use home assistant. Its a slide system so you can take the ipad and use it like normal. This is the 90 degree cable i used.…
This is a simple, solid, stand for the Ipad 6th generation. It is shelled to reduce filament use. I am including the downloadable file with labeled parameters that can be easily changed to whatever size you need. A360 downloadable…
This project is based on the idea of this stand: https://www.thingiverse.com/thing:73314 but completely redesign by scratch. It fit my new ipad air 2019 with cover, so it should fit also in other tablet with max thickness of 11 mm. You…
Wall mount for iPad 6. gen. A four-part structure. The lower parts are screwed to the wall and the upper part slides into place. The charging cable must be a 90° cable. Only the Home button can be used without removing the front panel.…
I also sell these on Etsy I printed mine at 0.16mm, unfortunately supports will be needed on some parts, but at least the interface layers are hidden on the inside. Should be pretty straight forward and easy to assemble, the parts should…
I've just got a new iPad and for whatever reason I can only find flip covers to buy - which I hate. Still, I wanted something that could protect my new toy and still offer some protection against the occasional drop. Furthermore I wanted…
This remix is optimized to be printed on a Prusa Mini+, so it's less than 18mm wide. PLA 0.2mm layer height 15% infill no support Optimize or modify the models: Use the original file from @RomainDewaele, find the link in the original…
This is a simple, sturdy holder that any printer should be able to easily print with minimal overhang, as well as fast print times. I designed this to be simple, quick and easy to use so that it will be as simple as grab and go! No…
This stand for tablets includes a mount for your stylus and also a hole to feed the charging cable through. Made for the Apple Pencil 1st generation and compatible with any other stylus with a diameter of 9mm. Max tablet thickness: 12mm…
I have an iPad and an apple pencil. I love the combo but with the Magic Keyboard case the pencil is only held in place by a couple magnets. An accidental tap and the pencil is lost forever. This is a simple holder that sits between the…
This is a stand for iPad pro 12.9 inches. You can easily create one for your tablet by branching my onShape file: https://cad.onshape.com/documents/d1434b490c22972ff1559eb3/w/3bec4244b99e0c5721cccfa0/e/9b628b6557156b23244f0111
Print on its side, 3 perimeters 0.24mm or finer. Print solid.
Can easily hold 4 iPads/tablets or several more phones. It also holds my M2 MacBook nicely. They're wide enough to accommodate most thick rubbery cases. The base is 180x180mm, the maximum I could do on a Mini+ I needed a way to store my…
A wall mountable case for the ipad mini second gen (A1491) ## Design Holds and iPad mini. Tested with a second generation A1491 but may work with other generations Uses no screws ## Features - Works with 90 degree and straight through…
Updated Oct '22: made the opening 1.3 mm wider. So the iPad should fit easier. (the slot width is 7.5mm) The angle is 60 degrees.
Separate the two items, print 0.2mm, 20% infill. One of the photos shows the print orientation.
Printed in PETG for iPad 10th gen 10.9" screen. Remixed from not michael
The pictures show a dual color, (just stopped the print and restarted with a new color) but these work great. we have one ipad mini used for spotify and the other allows us to look at settings different from the display. but we can just…
This is a remix of https://www.thingiverse.com/thing:4691651. One angle isn't enough so I remixed it to include a steeper angle. Very useful to leave a few all over the house. They get used all the time.
Want to use your 2021 11" Ipad pro as the interface for your DJI mini RC-N1 controller instead of a phone? Don't want to remove the Ipad from the Logitech Touch Combo case ( https://www.amazon.co.uk/gp/product/B07W4DH1Y5 but are ok to…
Printed with PETG in a Bambu P1S. Pencil mounted on the left side as it makes carrying the iPad easier, for me at least. Lays flat on the table, makes writing/drawing easier. Edit: adjusted the dimensions a little for a better fit, added…
Best printed on its side, 0.2mm, perimeters only (i.e., set Perimeters to a high number). Requires no supports. This is the big sibling of https://www.printables.com/model/362237-elegant-phone-stand which is a similar stand for phones.
thanks for the great original, i increased the size of the base for a better stand. Beschreibung This is an stand for an laptop iPad and an e-book with all hexagonal pattern. If you want to modify it to fit perfectly on your devices…
Rough model of the 11 inch iPad Pro M1 to use for making cases or mounts.
Back bracket to allow an over-extended GameSir G8 Plus to fit on an Apple M4 iPad Pro comfortably. You do have to really pull the springs apart to get this on but I'm quite happy with the results! Printed upright (lip facing up) in PLA…
This model is what some MAY call a “perfect fit”, in that, it has incredibly tight tolerances. In an effort to keep the design clean, there are no cut-outs for the lock button, volume buttons, or home button. To remedy the issue with a…
This is an iPad Pro 12.9" stand for thicker cases (e.g. EVA-Foam) Das ist ein iPad Pro 12.9" Ständer für dickere Hüllen (z.B. Schaumstoff) Print instructions Unassociated tags: hülle, ständer Category: Tablet Print Settings Printer Brand:…
This is a Tablet / Ipad mount for a Camera Tripod. It is for a 1/4" thread
Bonjour, Je vous propose un support tablette (ipad, android …) réglable et compact. Imprimé en PLA avec couche de 0.20 mm. PENSER AUX SUPPORTS => traverse 1 et traverse 2 Détail de l'ensemble (8 pièces) 2 poignées de serrage 1 Traverse 1…
Simple wall mount bracket to hold your device such as a tablet, laptop or anything that fits. This bracket mounts to a standard 1-inch pegboard or screw to any surface. Two model widths available (20mm and 30mm)
This uses the very useful VESA mount by jeffharbert to make a VESA compatible tablet mount to attach your iPad or similar to a monitor arm. I used this dual monitor arm from Amazon and have it setup with a montior and an ipad on my desk.…
Print both A and B Files. Any material, any speed should work fine. We used 0.2mm layer height with PLA+.
iPad / Tablet Stand (wide for thick case)
I ve printed this for my girlfriend so we can cook with her ipad in vertical orientation. That was the very first request. Amoungst the already created ones on thingiverse she s chosen this design :…
Enhance your workspace with this functional and stylish iPad Stand Drawer Riser. Designed to integrate perfectly with the original design - iPad Stand Riser. Optimal Viewing Angle: features a 2-degree tilt, ensuring a comfortable and…
I saw a similar design on Thingiverse, so I decided to do a new version where I can also fit my iPad. This stand is for a MacBook Pro (15 inches) and an iPad Air with Apple's Smart Cover. The top opening for the Mac is 16mm and for the…
This print allows you to use your iPad while rowing. It is designed to slip onto the PM5 monitor of a Concept2 rowing machine. Please note that you need to ensure that the thumb screw for the PM5 is tight enough to stop it falling…
Print settings: PETG 20% Gyroid infill What you also need: 4x M4 countersunk screws Glue (Felt or stool protector pads) Print the “Holder” twice and then glue them to the “Wall Mount”. The tabs should fit perfectly into each other. I…
Ich war auf der Suche nach einem Halter für mein iPad damit ich es an der Skadiswand befestigen kann. Da ich nichts passendes gefunden habe ich mir dieses Model einfallen lassen. Verwendet habe ich: Drucker: Sovol Sv06 mit Klipper…
ENGLISH: In the name you can see what type it was designed for (phone/tablet), but also what with its intended for. For example, Adjustable_Phonestand_13mm is for phones that are 13mm (or less) thick. Remember that it is better to take…
Design for my iPad Pro stand, or may suits other iPads models~ I quite like the color of it~ and it works quite well in both landscape and portrait mode~ Anyway, Happy Printing~ Nan Design Studio
INTRODUCING: THE FRAME This over engineered frame and stand fits like a glove on the iPad Pro M4 (13 inch). A remix for the M1 and M2 12.9 is available: https://www.printables.com/model/999845-the-frame-for-129-ipad-pro Everything is…
There wasn't a mount for a tablet, so i created mine. This is specifically made for the ipad pro 10.5, but i added the .f3d file so you can easily modify it to adapt to your tablet dimensions. I suggest you make the arm distance 3 mm…
This stand offers an angled design tailored for the iPad Pro 12.9", enhancing the drawing and writing experience. It provides a comfortable tilt for creative work or note-taking.
Remix of https://www.printables.com/model/1182209-gamesir-g8-plus-extension-for-samsung-tab-s9 and fits my m4 13" iPad perfectly and is super stable. Please see the video on the original model for assembly instructions.
Intro With the release of iOS 16 you can now pair Joycon controllers with iOS devices. These adapters give you the ability to mount JoyCon controllers directly to your iPad. This will turn your iPad into a great handheld gaming device for…
Simple, stand to hold 10.5" iPad or similar thin tablet, 6.9mm max thickness. Print instructions Simple, no support, iPad stand. Print with a brim for better bed adhesion. As you can see, mine started to release.
iPad Air Photo Frame Stand This print turns the 1st generation iPad Air into an attractive and useful digital photo frame. The four pieces slide onto the iPad and fit together neatly in the style of a mitered picture frame. Small magnets…
