55 modeli
I recommend printing at low speeds around 60 mm/s; a thickness of 1.5 mm ( in stl you have to change it); 100% infill; easy to attach with tape; good performance with all print materials; The two versions differ in terms of robustness and…
Many different pieces to take advantage of the direction of print, so it's easy to print, and then put together with little glue. Print windows or not with transparent filament.
A mesh to fit the cold air intake that leads to the cabin on an Iveco Daily Mk 4. The wire mesh that sits in the rubberised cover was missing from my van. The rubber surround was still there with 8 stubs of rubber where the mesh had been…
Iveco daily VI after 2019 year sun visor holder/bracket. it's not perfect but works and hold strong. You are welcome to make changes and finally better. Hope it will help someone, because i couldn't find it one second hand in Poland, and…
Printed in PLA, need more keychains ? look in my designs. Category: Keychains
Letter inserts for the recessed steering wheel logo of an Iveco Daily. I've made this for my 2011 model, but it may fit others. How I Designed This I downloaded a vector image of the current Iveco logo, capped the holes and extruded this.…
Old lever was broken so I made this one. It's little smaller than original part but functional. For the model type on the picture. Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: Yes Infill: 50 Filament: PM PET-G Category:…
Iveco Daily Lufteinlass Beifahrerseite Vorne. Für Baujahr ca. 1991
Modely Pražského autobusu IVECO Streetway 12M a 18M. Vytvořené v TinkerCad. Potřeba použít podpěry. Modely udělaný na 3D tisknutí. Připomínáme že tohle jsou původní modely, na našem profilu si můžete stáhnout modely po úpravě.
IVECO logo for cars new version, letter high is 5cm if you want it bigger you need to scale it. For letter E you need to combain file C and E.
Housing for the third brake light on an Iveco Daily. Designed as a replacement part. Note: One edge may not fit perfectly – I couldn't model it precisely due to lack of reference data. May require slight adjustment or sanding. Camera:…
Tento model autobusu pochází z vozového parku pražského dopravního podniku. Model je inspirovaný podle detailních fotek pražského autobusu Iveco Streetway v kratší verzi což je 12 metrů.
part number 105802316195
Autobus, který prochází z Pražské autobusové flotily. Tento autobus je od výrobce Iveco a je to přesněji je to typ Iveco Urbanway 18M Hybrid ale tento model je již po faceliftu.
This twist-in clip will hold the bonnet stay (the long metal pole) in position when the bonnet is to be closed. It pushes into a square hole measuring 8.5mm x 8.5mm and twists about 50 degrees to lock in place and align with the bonnet…
This is a revision of the 1U 10" Rack side panel by @yakk0dotorg_2261884's https://www.printables.com/model/965473-1u-10-rack-side-panel which is a remix from https://www.printables.com/model/275203-10in-home-server-project side panel.…
UPDATE 02.03.2023 Da mir langweilig war habe ich den Luftdurchsatz verbessert indem ich oben noch einen 80mm “Pull”-Lüfter angebracht habe. Die Konstruktion ist etwas komplexer geworden da bei mir auf der Prusabox noch die Filamentboxen…
simple carry case for kardia single lead print upright without supports, raft reccomended Category: Other
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm This print uses 3 unique filaments Start with Black At layer #11 (0.96mm) swap to White At layer #17 (1.44mm) swap to Red At layer #26 (2.16mm) swap to White…
I made a simple replacement for the batteryholder of a SIP22 car key.
Iveco phone holder, pens and recesses Print instructions The supports are not needed anymore and can be easily removed with a finger, no pliers are needed. I also added a vase without JaJ. The holder is modeled on the Samsung x cover 4.
This replaces the easily broken nylon wheel. Note that the bearing on the lower wheel of my vans lower forward arm is just shy of 20mm diameter. I have noticed that this is an aftermarket replacement that fits later models that have…
Iveco Daily clutch disc centering shaft, every mechanic knows what I'm talking about, download, print, like, best regards, SCANER.
Model pochází z flotily pražských autobusů a jedná se o typ Iveco Streetway, ale o variantů, která už prošla faceliftem.
Tento autobus je z pražské flotily autobusů, přesněji od značky Iveco. Autobusy jsou jako skoro nejnovějšími autobusy v DPP.
Tento autobus je jedním z několika autobusů pražské autobusové flotily pražského dopravního podniku. Tento autobus má již facelift, ale zde je model před faceliftem.
printed in two parts and glued in any position from asa material
Crash Derby Iveco Model
This is a model of Iveco box handle, but it is possible use it for the other trucks. I printed it from ABS for a good strength.
The Iveco Daily vehicles we use in the company for waste collection have a hydraulic oil tank behind the driver's cabin. The cap consists of a part with a threaded connection to the tank and an internal part that fits into the threaded…
A clip that’s hard to find, but I managed to 3D print it. PETG, ABS or ASA material is recommended. 46475209
Insert it on rod and make 1/4 turn to lock it. Printed in PETG, 20% gyroid infill.
Handle person basket fire truck IVECO RK 270
Schraubbarer Bowdenzughalter für den Lüftungskasten eines Iveco Daily 2 4x4. Ermöglicht einen einfachen Austausch ohne die Bowdenzüge zu demontieren. Passend für die Frisch/Umluft als auch für Kalt/Warm Verstellung. Es werden zusätzlich…
Modell wurde von mir selbst nicht getestet, dah meine noch intakt ist. Deswegen würde ich euch um Rückmeldung bitten, falls Maße angepasst werden müssen. Da die Motorhaubenstange vorne etwas breiter ist als das Bohrungloch, ist ein Druck…
Für die Montage des LED Bandes wir ein Alluminium streifen benötigt.
Muttern M8 in den Befestigungsblock einlegen. Befestigungsblöcke ganz leicht an den Ladeluftkühler anschrauben. Die Muttern sollen zum Motorkühler zeigen. Sikaflex an die Befestigungsblöcke anbringen und den Ladeluftkühler an den…
Passend für IVECO Daily 2 4x4 Turbolader: CUST-No.: K14-4841844 PART-No.: 5314 970 7001 Einfach die benötigte Sektion der Schablone auf 3mm Stahlplatte anzeichnen. bohren, flexen, schleifen, lackieren -> fertig
I needed to mount the toll collection on-board unit for the Netherlands, and didn't have a good place to put it, so I made this. On the driver's side there is no grip above the door, however there are 2 small plastic covers that hide…
Version Lochdurchmesser Höhe Wandstärke 1 40 75 2 2 40 55 5
Blindplatte um die Schalter im Amaturenbrett abzudecken Adapterplatte für Wippschalter (28x10)
Dichtung für die Hinterradsperre eines Iveco Daily 2 4x4
yapay zeka ile görselleri kullanılarak çizildi
The diffuser allows you to connect a Webasto pipe to the car's ventilation system you need: Magnets 8*3 Door seal (not required) Screw M4 , 40-50mm long
Passhülse um den Bowdenzug m Entriegelungshebel zu fixieren. Die 5,2mm Version ist für den Metallmantel. Die 6mm Version falls ihr noch den Kunststoffmantel darüber besitzt.
EN: End cap / plug for the rectangular steel profile on an Iveco Daily. Fits an inner opening of approx. 43.6 × 63.8 mm. Designed for ~2 mm wall thickness. The outer flange covers the steel edge. Successfully tested in PETG / ASA. DE:…
Model pochází z flotily pražských autobusů a jedná se o typ Iveco Streetway, ale o variantů, která už prošla faceliftem.
Insert it on rod and make 1/4 turn to lock it. Printed in PETG, 20% gyroid infill.
Show your appreciation for Iveco with this sleek lightbox featuring the brand’s iconic logo. A perfect addition for truck enthusiasts, mechanics, or anyone who admires Iveco’s legacy in commercial vehicles. The design allows you to…
I needed to print an IVECO logo and I only found paid models or poor quality ones on the net. So I decided to make my own and share if anyone needs it too. With curvature on the back of the letters for hood deflector (IVCDLY144H). Or a…
