Liczymy pasujące modele…
My wife had a fall damage on her little Bosch KIOX and I thought it could help some bikers to get a protection case. It was a challenge to copy the shape and it took some iterations of the design, but here it is: A formfitting case to…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed for Cube Stereo Hybrid frame but probably suit most most frame. Attached with double-sided tape. Note! Make sure that the cables are long enough to turn the handlebar. Recommend to print with supports. I prefer the “closed”…
Bosch Kiox300 Halterung für die Mitte des Vorbaus. Headcap habe ich aus Petg mit 100% infill gedruckt V2 ist mit einer Mutter. V3 ist etwas gekürzt damit man besser an die Stecker kommt ( falls man will) V5 Mutter etwas bearbeitet…
There is a compact version version via this link available ***** Update 12.06.2023************* I recently bought a protective cover for my Kiox 300 . With this cover the Kiox doesn't fit anymore into the first version of the wall mount.…
Weather protection for Kiox 300 mount
Simple and compact case to protect your display
Um das KIOX300 Display sicher zu verstauen, wenn es nicht am Fahrrad ist, hab ich mir die kleine Box gedruckt. Es ist innen größer gewählt, damit man den Innenraum noch mit Moosgummi auskleiden kann. Verschlossen werden kann die Box…
This is a new design of the idea designed by Simped24. It is a bit beefier and I engraved the warming that Bosch eBicke Lock is engaged.
Replacing the unstable bracket with one leg. I printed it with some support shown in the pictures. I think it works best if you print it with ABS.
Die Halterung habe ich für mein Cube Bike gemacht und ich weis nicht auf welche Lenker die Halterung alles passt
Ich habe einen 90° Adapter für die Halterung des Bosch SmartSystems Kiox 300/500 & SmartphoneGrip gemacht. Mein zweck ist, das Smartphone in Hochformat (Portrait) am Fahrrad zu befestigen. Bei mir sitzt das Smartphone bei direkt gedrehtem…
The one in the Picture is printed out of PA-12 CF. I would suggest you choose a filament that can survive sunlight and is tough. The Clamp needs to be printed twice. Hardware needed for Clamps: 4 x M4 x 16 bolts and nuts.
Bosch Kiox 300 Halteradapter auf Garmin Edge u.a. Mit dem Adapter ist es möglich, sein Garmin Navi (z.B. Edge 830 u.v.a.) direkt anstelle des E-Bike DIsplays Kiox 300 von Bosch zu montieren. Das Garming Gerät rastet zwar nicht ein, klemmt…
Found this Kiox frame bracked and did a Remix to my needs, i added holes for Cable Tie and closed the Lower Cable opening. Update1: I added a version which gives you the possibillity to access the USB Port to charge your Phone etc. You…
stick base with double sided tape (3m like gopro) to frame. use the original kiox insert and mount it to the base.
This custom-designed handlebar mount is made specifically for the Bosch Kiox BUI330 display. It offers a low-profile, reliable way to mount your Kiox unit to standard bicycle handlebars. Great for riders who want a cleaner or more custom…
Halterung für das anbringen eines Kiox 300 / Kiox 500 und einer Uppel LED Lampe. Die Position des Dispplay und der Lampe kann im Winkel verändert werden. Der Halter wird komplett verschraubt und ist auf langlebigkeit im Gelände ausgelegt.…
🇺🇸I've crashed my e-bike and the clamp of the control unit from the board computer broke apart. The control unit self is working just fine, but without a atachment to the handlebar its not usable while cycling. I designed this model to…
2 Ober-Unterschichten 2-3 Außenlinien 15-20% Infill Ca. 16g 1:16h bei 240mm (Core XY „The 100“)
a remix of my “ Bosch Kiox 300 wallmount with hook " - adjusted the dimensions to fit in a KIOX 500 (with a protection foil on it). There are several versions available, please refere to their attribute according to their filename:…
Two versions for holding one or two Kiox 300 e-bike displays. 10% fill and printing with PLA is good enough. My wife says it looks like the displays are sitting on a couch :)
Scaled the Original Case from Dennis to fit my Kiox 300 Display while the Bumper is installed. Also added a Hole to make opening the Case and removing the Display easier.
Simple cover to protect the small contactpoints and parts of the display holder (there is no text on the printfile) ;-)
I created this holder for a Bosch eBike Kiox300 Display to be attachment to an Ikea Skadis pegboard. Perfect for storing the display when the bike is parked, easy to print and uses special pegs that I have designed. These can be found…
Holder for 2 Kiox displays (eBike) with keys for home To put on the table or hang on the wall. To hang the bracket, drill through the holes on the back.
I changed my Kiox E-Bike computer to an Nyon 2021 with a new mount. The ahead stem with integrated Kiox mount of my KTM Bike was unused and had no nice looking when the Kiox is not inserted. So i made a cover that fits perfectly into the…
This is a remix of my older remix. The new model is is more compact - the keys are strored in front of the wallmount, not at the bottom - saves space can be used with or without a protective case over KIOX300 The model consists of two…
Bosch Kiox300 protective skin Used filament : TPU 95A Insert the tall side first and then push in the short side.
This is a non-functional, dimensionally accurate 3D model of the Bosch Kiox BUI330 display, ideal for prototyping and designing accessories. Whether you're making a custom mount, screen protector, or enclosure, this model saves time by…
I wanted a mount for the Mondraker mountain bike that fit on the frame rather that on the handlebar. You will need two M3 screws for mounting the display on the mount and two zip ties for securing the mount on the frame. The cables should…
Wall mount for a Bosch Kiox 300 E-bike display that's protective for its screen. The screen is facing to the wall and th
Display Adapter Kiox 400C inkl. Fusion 360
Changed from ball to real hook ---------------------------------------------- Geändert von Kugel auf echten Haken.
I made a nice insert Box for the Bosch Kiox Display Headunit BUI330 It's easy to take it with you in your pocket Insert Box 55.11 x 26.5 x 59 mm
I often switch my small Kiox screen with my Bosch SmartPhone Grip to use my smart phone as a navigation… but this was not working lately. The heavy phone, my driving style or the bumpy road was often to much for the single mount arm of…
This is a TPU insert for your Bosch Kiox computer to put in the Intuvia box.
Der Halter bietet die Möglichkeit das BOSCH KIOX 500 und IKEA SKADIS zu vereinen.
A simple and practical wall mount designed for Bosch Smart System accessories such as the Kiox 300, Kiox 500 or SmartPhone Grip. Keeps your gear organized, protected, and always ready to use. Can be printed without support, require two m3…
designed a mount to install the standard bosch kiox upgrade kit to a ‘normal’ steering wheel. It uses 4x m4 inserts and was printed in ASA. You need to print 2x the clamp and 1x the holder
Ich wollte mir für die dunkle Jahreszeit LED Blinker einbauen, entschieden habe ich mich für China Motorrad Blinker mit Lauflicht. Davon gibt’s sehr viele in der Bucht z.B. Artikel 356595529874. Leider bei den e-Bikes ist auf dem Lenker…
A BOSCH Kiox & Key protection and storage box. Edit (26.08.2026): I added a cover for the KIOX display, but without a key compartment.
Eine schnell zu druckende Halterung, um das Diplay und den Schlüssel ordentlich zu lagern. Da ein Fahrrad von Intuvia zu Kiox gewechselt ist, benötigten wir eine neue Halterung. Natürlich mit dem gleichen Lochabstand (50mm) zur…
Bosch Kiox 300 35mm handlebar mount You will need an M3 screw and nut to complete the assembly. Print in PETG, TPU, ASA 100% infill
Need ~M4x25 bolts and M4 nuts and need longer M3 bolts for the lower kiox bracket In slicer, right mouse-click and select split > to objects, then re-orient and print Printed in ASA, I used 4 layers raft and PETG supports, see .3mf file…
I often switch my small Kiox screen with my Bosch SmartPhone Grip to use my smart phone as a navigation… but this was not working lately. The heavy phone, my driving style or the bumpy road was often to much for the single mount arm of…
I've crashed my e-bike and the clamp of the control unit from the board computer broke apart. The control unit self is working just fine, but without a atachment to the handlebar its not usable while cycling. I designed this model to…
Scaled the Original Case from Dennis to fit my Kiox 300 Display while the Bumper is installed. Also added a Hole to make opening the Case and removing the Display easier.
Ersatz für den etwas “klobigen" Originalhalter. Ich habe den Halter mit PETG gedruckt. Infill 90%
