Prusament Lion Low Poly
Print instructions The 3mf file has all the basic settings and it should print like this I adjusted the supports so the chin will look good and there is gonna be minimal cleaning
- Pobrania
- 9838
- Polubienia
- 813
- Ocena
- 4,96
2488 modeli
Print instructions The 3mf file has all the basic settings and it should print like this I adjusted the supports so the chin will look good and there is gonna be minimal cleaning
This lion head model represents strength, royalty, and wilderness. With finely detailed mane and expressive facial features, it makes a powerful decorative piece or educational model. Printing : Works well with both FDM and resin printers…
Adult Simba From Lion King. Pumba can be found here: https://www.printables.com/model/524756-pumbaa Timon can be found here: https://www.printables.com/model/524771-timon
This is the new chapter 5 season two medallions
This is a low-poly 3D model of the Lion and Sun , an ancient Persian symbol that once appeared on Iran’s national flags. The lion holds a sword, with a stylized sunburst behind it – a modern, geometric take on a classic cultural emblem. I…
Ouroboros Medallion Added ouroborus2coaster.3mf on 12/08/2023. Flat Bottom (details on one side only) This is not an easy Print. I am not always designing with “easy” in mind. but I will give some pointers here. I have kept this in one…
Scanned statue of a lion - Naskenovaná socha lva
Easy to make a cute Lion keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
این آخرین نبرده، پهلوی برمیگرده The Lion and Sun ( Shir-o-Khorshid ) is one of Iran’s most enduring national emblems, with a history spanning nearly a thousand years. While currently banned by the Islamic Republic, it remains a potent…
Lionel Messi Bas Relief. Testing out Flux + TiledZoeDepth. Flux is nice because there is a lot less need for multiple batches to achieve desired results while using Forge (Stable Diffusion) As long as your description is tight you are…
I have a playmat from 2016 with a lion plastic toy. Made some changes with the design an into keychain. NO MMU NEEDED I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Coin with engraved lion symbol. Uses art from PublicDomainVectors.org .
Hercules medallion from the Disney cartoon. Perfect for use as a Cosplay accessory or as an ornament. For cosplay use I planned to glue it on the back side on the eco-leather belt. Model created by Omega3DLab (designer Raffaele Kira…
Printed from Prusament PLA – Prusament PLA Blend Viva La Bronze 970g | (prusa3d.com) Bigger version – Lion on the wall | Printables.com
Unleash the spirit of the wild with this 'Lion's Resolve' 3D model. This majestic lion sculpture captures the essence of strength and determination, depicted in a powerful, crouched stance on a rugged base. Every muscle, every detail of…
So you have to pop out the medallions out of the print then; you have to glue the blank medallions I have created. like always follow i will follow you back ,and enjoy!
This is from a 3D scan that I did with RealityScan and cleaned up a little bit in Blender. Super easy print. No supports. I like to print mine at 5% infill with 2 shells. Looks great in Marble PLA. The 75% scale model fits the Prusa MINI.…
Big Pit Love is not a remix of Pit Love. They are opposites! In Pit Love, the Pit Bull comes out of charm and is altogether not as sturdy. This is perfect! Original file is an svg used for CNC router, it makes sense it works out in…
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Enhance your space with this stunning Triskelion coaster! Featuring a timeless symbol of balance and motion, it measures 100 mm in diameter and 5 mm in…
Coaster set inspired by the Legend of Zelda Ocarina of Time. All 6 of the coasters were printed in the corresponding color and filled with clear Epoxy to get a flat surface for your drink. each temple logo is a few millimeters below the…
Shiva Medallion A small Shiva medallion for where you desire. Designed on Tinkercad. One object to print. Clean your build surface with (Dawn) dishwashing soap! Avoid lifting and warped prints! Scale's easily if you want a larger or…
The Max Verstappen Lion, now on a coaster. 2 versions included, one with the lion indented and one where it isn't, just print it upside down and it will turn out flaweless. Also i didn't have white and orange PLA when i printed these so…
kleines Schälchen mit Löwenkopfdeckel zur Aufbewahrung von Kleinkram (Schmuck,Bonbons, etc), gedruckt auf Prusa Mk04 und Bambu A1 Mini gedruckt mit PLA (Galaxy Black und Gold) leicht zu drucken, keine Supports notwendig small bowl with…
Lion Head Codpiece Resize as needed.
If you are advanced at making models tell me what sofware you use.
This charm is an amazing way to show off your pit bull love! At 100% it is about a 2 inch square. Created for the contest - Printed here in Silk Silver Inland Filament at .2 layer height.
Der Pavillon Hersteller liefert leider keine Regenrinne mit. So das ich eine fertige kleine Dachrinne aus dem Baumarkt nutzen wollte “Marley Dachrinnenhalter”. Diese funktioniert jedoch nicht mit den angebotenen Halterungen. Daher habe…
Magnetic Initiative tracker for use with the sliders from my monster card boxes , all the creature trackers can be found there. You need to add a pause in the print to add the magnets in the holes of the Stand. 3x3 mm magnets in the stand…
Recreation of vintage (1950s to 1970s) wooden Japanese kumiki puzzle of a Lion. Part names in model files match original instructions. Original instructions show Part 1 behind part 3, but I like the look the other way around. Either way…
Heraldic lion tabletop item, lion holding shield
Ever wanted to make lion footprints on the sand/mud? Well, this one is for you :-) It can be attached to your shoes or hands using laces or flexible filament.
separate into parts for easy mmu coloring 1x3mm magnets press in. use a little glue if magnets are a little loose. My container for these tokens can be found here . these work with my miniature base and HP dial system will be adding…
Jednoduchý medailon kachny. A simple duck medallion.
Sculpture Lion détail très poussé avec Blender ! 5.0 Utilisation d'une tablette graphique pour autant de précision. N'hésitez pas à me demander qu'elle tablette graphique j'utilise pour réalisée mes models, je la partagerai sans…
Jaws of the Lion Monster Boxs Store and Use of Monster Card, Ability Deck, Initiative tracker and standees. The slide covers for the decks doubles as an initiative tracker and has magnets (3mm x 1mm) embedded in it to be compatible with…
Medailon ve tvaru květiny vytvořené z kruhů. Flower-shaped medallion made of circles.
This is a simple accessory that should work with any Rise Garden model, so long as they use the square cups. This fits neatly within the top of the cup, and then the scallion fits within the cup. This cup is side to fit most scallions,…
Earphone Lion Holder for Samsung Galaxy Buds 3 I designed a 3D print model of a lion, where you can temporarily attach earbuds to its ears. There’s a storage space for the charging case at the back. The model features a low-poly design,…
Bring elegance and strength to your space with this Low Poly Lion Statue . This stunning 3D-printed sculpture, standing at 75 mm tall , combines modern geometric design with the majestic form of a lion. Perfect for minimalist decor, desk…
For pavilion with 80mm diameter posts. Print in place. Need no support. Parts are quite easy to separate.
Několik slovanských symbolů v podobě medailonů Several Slavic symbols in the form of medallions
Klasický model jen jsem mu dal barvu :D
I made this for when we attend the local high school sporting events. This is MMU compatible. It works with Billrobland 's chain model found HERE .
Original mounting parts of the welding helmet are made of plastic. Even the threaded section is plastic, which unfortunately wears out after a few years. To solve this, a guide hole was added so that an M6 x 25 or 30 mm screw can be…
My Best Six Million Dollar Man Plate. Variable layer height also required uses two layers.
Podpery sa vyberali celkom jednoducho. Model je veľmi zaujímavý a žiaka veľmi potešil.
The Six Million Dollar Man Logo, Dual Layer with variable layer height base.20mm & text.10mm. ENJOY!
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 50+ Supports: No Print Orientation: Default as modeled
Traced the most recent Fortnite Peter Medallion in Fusion 360.
A Lifelike 3D-Printable Lion Model Printing Recommendations: PLA, 0.2 mm layer hight, no additional supports needed, 15 % infill, 2 perimeters. You can also test your printers bridging performance with the model. Remark: I reuploaded this…
Originally published here on Thingiverse . This was made with MATLAB R2016a in a similar way that of other astronomical bodies, plotting a topographical map on a spherical projection. I could not find a good, detailed and free…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Lion Decor . Feel free to scale it as desired. Printed with Fuzzy Skin effect. Fuzzy Skin: All walls Fuzzy Skin Point Distance: 0.3 Fuzzy Skin thickness: 0.2 Happy printing! With more and more questions popping up about the commercial use…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Swap Instructions: Start with Black At layer #8 (0.76mm) swap to Orange At layer #11 (1mm) swap to Beige At layer #18 (1.56mm) swap to White for the rest.
✅ little support material is needed if you lay it flat on the print bed. ✅ Layer height of 0.2 mm is sufficient for a clean look. ✅ PLA is great, but it looks even more classy with matt or semi-gloss filament!
Designer LION Sculpture Printed with fuzzy skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.15 Fuzzy Skin thickness: 0.15 If you're interested in the commercial use of my models, check the link to my Patreon…
I had this model commissioned to print for my kids. Sharing it for all to use. There is a flat version and a rounded version. Using my Prusa Mini+ the rounded version came out slightly jagged. Props to SergioP75 on Reddit for creating the…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips Edit: Replaced entryPlug, Kata, Blade, Tri in the armor part, very minor changes so less glue required. Added frame-head because I forgot to upload…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips/files Horn assembly - Horn goes in from the bottom. Chest assembly, middle front plate goes in first. Super glue is your friend. Original pieces…
Instructions & Tips Print SF2 SB2 and SB3 parts using brim Printing the bones out of PETG gave me better results, PLA also does the job Use exploded view of skeleton and assemble 4. Glue fur parts on the skeleton start with the big pieces…
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
A collection of lion's head More heads will be added soon…
All my photos are REAL and show an actual 3D-printed figure photographed by me. [ Suggested Print Setup ] Nozzle: 0.4mm Layer Height: 0.12mm Infill: 5% Wall loops: 2 Supports: Tree (auto) Printed with: BambuLab PLA Matte Ivory White If…
A statue of a proud lion! Scale it to your needs; it's High Res. Printing recommendation: 2 perimeters, 25% infill, support is not needed but the snout will benefit from it. Happy printing! Remix documentation: I modified the base version…
A new organizer with little waste of material that actual fits everything. I really like the ideas behind some organizers that I saw at Thingy, but they use very thick walls and big filling blocks that add time and material in excess. So…
The Voronoi Lion is an aesthetically pleasing model that combines the majestic form of a lion with the intricate beauty of Voronoi tessellations. It’s ideal for enthusiasts looking to add a touch of modern art to their surroundings.…
because people on the fortnite subreddit asked I guess I'll make the rest of them. Nisha Shield medallion from Fortnite.
for multi-colour printing, just set the slicer to change the colour in a specific layer. each colour is in a different layer. https://www.printables.com/cs/model/718645-valerias-medallion
This Lion Head is a fairly straight forward print. You only need supports for the teeth and behind the ears. For similar models see my Collection of Animal Heads/Busts that I have designed or remixed. All of these designs use the same…
Detroit Lions Logo 1st Layer Sliver 2nd Black 3rd Blue
[5/12] LEO - THE LION Here is complete series of sculpted zodiac signs. All my photos are REAL and show an actual 3D-printed figure photographed by me. [ Suggested Print Setup ] Nozzle: 0.4mm Layer Height: 0.15mm ( You can adjust the…
Originally published here: Earth with exaggerated topography scaled one in sixty million by tato_713 - Thingiverse These models were made using MATLAB R2016a with a topographical map of the Earth, including the seafloor. Like other models…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips/files Edit: Added color separated plates for remake color scheme. Paint apps: head - yellow, white, black, green for details. chest - yellow, black…
I loved the first kit card Hellgy sent me and I know from that time I wanted to create one. It reming me the plastic toy to assemble I was doing with my father 😃. So here's the first design, designed from the ground, even if you can find…
Lion Head model with a standup base. Use -0.1 mm horizontal expention for the best fit. Print Settings Rafts: Doesn't Matter Resolution: 0.2 Infill: 15 Category: 3D Printing
LANCE OF LONGINUS IN EVANGELION Category: Toy & Game Accessories
If you are interested in the medallion, on my profile you can download all medallions chapter 5 season 2
A figure of a sitting lion, very detailed. Makes a nice decoration piece.
Lion Hexa, Sculpture ------------------------- 8.3.2026, updated to V2 - better model
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #6 at 0.56mm Red until layer #19 at 1.6mm Pure Yellow until layer #23 at 1.92mm White for the rest.
Green Onion Mason Jar Station! tired of buying and buying? time to start growing instead! simply chop the bases off the onions and stick them inside a jar of water (with nutrients). they dont need much light and are very hardy. made for…
I have made the Montague Medallion from Fortnite, continuing my series of shield medallions. This one comes with an optional two-part print so you can make the blue crystal in the middle of it without needing dual-extrusion/AMS
All 5 of the Fortnite medallions in a form with an extra base to round them off
This is a digital 3D printable model of the Cat Pendant from The Witcher. The download contains STL of the model ready to be 3D printed on a 200 mm print bed placed on the print bed as we would print it to save you time. SIZE At 100%…
Better to print from temperature resistant filament (ABS, PETg) and without supports
If you are interested in the medallion, on my profile you can download all medallions chapter 5 season 2