32 modeli
My filament is located in a dry box and I've upgraded to a direct drive extruder so i needed a reliable mount that would keep my filament sensor properly oriented to the extruder. this one will slide right in no screws required, and then…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original design using the supplied case had allot of drag, so I redesigned it to not use the case and this is so much better. It still auto-aligns to the extruder but the drag is drastically reduced. in place of screws you could…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I work as an Tooling Engineer and I love to use spiral spring pins (DIN 7343). But I have not found its 3D printed equivalent. So I decided to make them. Advantages over regular pins: Do not need precise hole diameter so no matter your…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My old Sram Locating Sleeve was worn out so I made a replacement. You need 4x M3 brass insert 4x M3x8mm hex screws PETG-filament Do you like it? Please consider to buy me a cup cup of coffee . That would make my day!
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
6 times locating pin_nastavny kolicek_eta sahara
Wydruk około 1,72 €–2,11 € nettoWstępna wycena jednego wariantu
i really liked Rappetors idea of the locating pin, but needed the z offset supplied by Vlad's mount. Thought i would share it in case anyone else wants to use it.
I have my SV07 in an enclosure and thus have the filament spool mounted elsewhere that caused some excessive drag in the filament path as it passed through the runout sensor. So I made this little bracket that moves the filament runout…
Unable to find the locating pin for changing the timing chain of a BMW K1200 I decided to model it myself. Parts number are: 83300401482 and 11 1 842 I tested it myself without any issues with the following configuration: Material : PLA…
Pretty much the same as the original. I scaled down the STL in the remix by TechKnight by a factor of 0.67 and added a small ring of plastic which I used to locate the blank studs, purchased from EBay, before sticking them in place.…
Qidi Q2 puts its AP (Host MCU) Board on the left side panel in the chamber. This leads to the chances of the system crash(unexpected shutdown) due to the high temperature of the chamber. General speaking, comsumer grade MCUs have -40°C ~…
T Clip with locating pins, so only one clip is required to prevent rotation. This clip seat is primarily designed to work with low profile T Clips: https://www.printables.com/model/1215997-low-profile-t-clip-for-ikea-skadis To use with…
This was just a quick solution to a one time problem, but I've decided to upload it just in case someone else needs this exact adapter as well. Printed it in ASA, 0.2 mm layer height, 5 top/bottom layers, 3 walls, 25% infill.
This is a parametric tray for the T-Clip system, using a modified T-Clip socket that locates to the SKADIS slot
Added a locating pin and hole to ease glue up. Also increased the bar opening half a mm to accommodate my 8mm thick bars
This is a parametric tray with lid for the T-Clip system, using a modified T-Clip socket
Struggling to pinpoint the source of an unpleasant odor near baseboards, ceilings, or other hard-to-reach places? This adapter provides an efficient tool for precisely identifying odor sources. Designed to work with a 3M half-mask 6002PRO…
Designed to provide a repeatable location for the Gweike G2 rotary chuck, near center of the work area. Bolts in place using 2-12 m5 bolts. Recommended bolt length is 5-7mm.
Designed this while remodelling my walk in robe, might be useful to someone else! Category: DIY
This file is for the hole location jig to drill a pilot hole when adding a winding knob to any Polaroid Land camera.
GoPro cameras have revolutionized the way we capture action-packed moments. Originally designed for sports enthusiasts to record their adventures, these compact cameras are built for durability, portability, and versatility. But let’s…
All you need is a PC-4 M6 PTFE adaptor and 1.75mm PTFE tubing.
This is a build plate cleaner holder for the IKEA Skådis pegboard, remixed to use the T-clip mounting system with locating pins. It also includes vertical channels, or "rails" to assist with drying the microfiber pad. The original…
This is wire brush holder for the IKEA Skådis pegboard, remixed to use the T-clip mounting system with locating pins. It replaces the somewhat loose hooks on the original with T-clips that lock into the Skådis holes, and locating pins to…
Ortur LM2 locating brackets enables you to place your laser in the exact same spot every time. Print 2 of each and attach them to your work surface. Replacement legs for the lm2 can be found here:
This is a remix of Rextruction's SV07 Filament Sensor Relocating Bracket . While the original design is fantastic for moving the runout sensor from the top frame to the toolhead to reduce drag, I found that many users (myself included)…
Camera Monitor Mount for Top Handles This camera monitor mount is designed to attach an external monitor to the front of a camera cage or top handle. It provides a compact and stable mounting solution while allowing the monitor to be…
Like so many things on Aliexpress, the pillion seat cover for the Kawasaki Z H2 is 99% perfect just missing a little finesse... or in my case the rubber cover for the rear retaining tang without which it can slide from side to side. It…
LR3 Forward Cargo Panel Locating Nub. See images for all details. printed in PETG with 100% infill and 3 perimeter layers. follow the print orientation in the images or else it will break
When my friend was swapping his handlebars on his Suzuki SV650, he needed these parts so he doesnt have to file the original parts. Custom handle bars dont have holes for the locating pins, so we needed the same part without pins. But we…
WARNING : This does not fit the oval-shaped 118mL (4 FL OZ) bottles which measure 53mm x 30mm. Please compare the measurements of measure your bottle against this model in Orcaslicer or your tool of choice before printing. This is a…
Qidi Q2 puts its AP (Host MCU) Board on the left side panel in the chamber. This leads to the chances of the system crash(unexpected shutdown) due to the high temperature of the chamber. General speaking, comsumer grade MCUs have -40°C ~…
Qidi Q2 puts its AP (Host MCU) Board on the left side panel in the chamber. This leads to the chances of the system crash(unexpected shutdown) due to the high temperature of the chamber. General speaking, comsumer grade MCUs have -40°C ~…
