Liczymy pasujące modele…
MK3S+ and MK3S FS Cover 6mm OD 4MM ID Adapter For PolyBox or RepBox with 6MM Tube (PTFE) based on the Original Prusa MK3S+ and MK3S FS Cover. Note: This GCode is for the MK3S+ the GCode for the MK3S is located under the User Print Files…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Are you fearful that your favorite filament fills freakishly fast with fluid, causing fatal flaws, and find yourself flinging fountains of fecal failures right in the trash? Fret not, faithful followers, because the answer is, The PolyBox…
Wydruk około 2,61 €–3,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These trays can be filled with desiccant (silica gel) and used in both Polybox I and II. This makes it possible to use both pouches and loose desiccant and remove it easily from the Polybox. The original cover plates remain in use to…
Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu
Bought the Polymaker Polybox drybox Edition 2 to keep my filament dry. The box comes with some plastic tubing with a 6mm outer diameter to guide the filament to your printer but no way to mount it your printer. Searched a bit for already…
Hello, I created a desiccant tray for Polybox II I haven't tested it if this shape fits for Polymaker ver.1 It has top cover so you can't spill out beads For the hinge use: 2x M3x20 allen screw and 2x M3 standard nut v2: Hinges change,…
I am using the Polybox for storing and using my filament but the way the big 6mm ptfe tubes are attached to the box are really poor. To fix this I designed an adapter to connect the 6mm ptfe tube to a pc6m10 or pc4m10 pneumatic…
Uses a 3mm hole to allow filament to pass through Uses an M11x1.5, found this to be the best when screwing in an m10x1.5 Contains the fusion360 files for use with other thread types
I made a desiccant tray for the polymaker polybox so you can use your own choice of silica gel desiccant beads instead of the provided packets. It fits like a glove in my Polybox edition 2, should also fit in the original Polybox, but…
This container works with all spools that fit inside the polybox and with populair couplings. It snaps firmly shut to minimize the risk of spilling. I printed them out of PC so i can put the into the oven and dry the silica gel without…
Desiccant container to sit behind filament spools. Provides generous desiccant volume for nice dry filament environment. I'm unsure if this works on the first edition PolyBox as I don't own. I've designed this with basic chimney effect -…
Raises the top of the PolyBox to fit 2.5kg, 30cm filament spools.
I really like the PolyBox to keep my filament dry. It really works and also makes the spool roll very easily. This prevents a lot of misprints, especially for larger printing jobs. The low moisture also gives a better surface finish. I…
Container for using unpackaged silica gel, i designed it to be as tall as possible but still work with the drybox. I gave it an overhanging edge around the top to prevent the silica gel from easily spilling over the top when you move it…
I use a number of Polymaker PolyBox II filament dry boxes, which of course means I am no longer using the Spool holders supplied with the Prusa I3 MK3 Printers. This led to two problems, how to feed the filament & how to overcome the…
This is a simple cap for the 6mm Polybox Bowden tube so you don't get humid air coming in if aren't using a line. The interior dimensions are 6.5 mm. Category: 3D Printer Accessories
Plastic spools seem to work better in the Polybox using the bottom rollers. Cardboard spools seem to work better using the spindle tube. If you're like me, you've lost your spindle the first time you've placed a plastic spool in the box.…
This PolyBox insert fits both sides and the original covers are used for cover. There are handles on the inside of the insert for easy removal when full of desiccant. Two versions are supplied. One is optimised for a 0.4mm nozzle and the…
Uses standard skate bearings in the spool center holder and the axle in the Polybox to suspend the spool. This makes for much less drag on the spool and helps to eliminate TPU stretch before it gets to the extruder. To print, the filament…
Simple caps for bowden tubes on a Polymaker Polybox to add extra moisture protection to your filament without having to remove the tube from the tricky rubber seal. It should decrease the humidity in the box by at least 3%. One is an end…
Only had M6 connector on hand, tried another one but the threads was not good. For mor info and step files see original model.
This model is created with modifiers in PrusaSlicer and fits 8 mm holes. Print it using vase mode and 2 bottom layers. Friction fit placement, no glue needed. All my models are free to download and remix. If you appreciate them, please…
I was having issues with weak cardboard filament spools rolling smoothly on the 8mm rods in my new PolyBox 2. I tried resizing several existing roller designs, but none fit properly. I decided it was time to learn a little “Fusion 360”.…
A box I made to store up to 9 sillyshells , these wont take any of the larger variations. I may make a larger version to fit 15, if this design does well. Everything is in print orientation, and a piece of filament is used as a hinge. No…
This is a holder for the Material Swatches so that you can display your swatches in front of your filament rolls that are in your PolyMaker PolyBox. Print instructions Printed in .2mm Resolution without supports and default MK3S .2mm…
a top mounted spool holder for direct extruders in the polybox
mine has a 400 w heater. made with aluminium camposit plates and basic wodden inner frame
I wanted to convert my Polybox to a filament dryer / dry box all in one. Had a few other ideas but this one is by far the better solution I was able to come up with and is self regulating and seem to be doing a decent job at it. Sorry for…
Introduction Here's a model to mount a Zigbee humidity sensor into the PolyMaker's dry box, the PolyBox. Just like the included desiccant container, this model slots into the rear of the box (pictured). In the process of making this mod,…
jellybox sx side panel u can add your text on it or customize it how u want
This is a coupler to attach the tubing from the polybox to the prusa i3 mk3 filament sensor cover. Category: 3D Printer Accessories
This is my attempt to create the perfect drying container for the Polybox. I do hope to see some of your makes soon. For everybody that doesn't want to customize the lid I will upload some preconfigured files. Settings for Customization:…
The battery hatch of my Jellybox was opening on its own at times and the batteries were falling out, so I designed this lock that simply clips onto the base Category: Other
Repurposed an empty Zyn can into a magnetic container. Can be used as a fly puck or container for your steel ammo shot for your slingshot. No glue, 30x3mm magnetic is pressed in and whole insert is friction fit into Zyn container. printed…
I felt the need (no science involved) to have a desiccant box at the front of the unit as well. I'm not sure how this will affect the accuracy of the hygrometer.
There are many models of trays that fit the front or rear part of the Polybox 2, this one fit in the middle to add even more dessicant. Could work with the first Polybox model, not tested. Similar design that goes well with :
PolyDryer / PolyBox Mount A sturdy side mount designed to hold a PolyDryer / PolyBox Dry Dock . I designed this mount for my mobile 3D-printing setup with a Bambu Lab P2S. The goal was to keep the PolyDryer securely attached without…
I use a number of Polymaker PolyBox II filament dry boxes, which of course means I am no longer using the Spool holders supplied with the Prusa I3 MK3 Printers. This led to two problems, how to feed the filament & how to overcome the…
