Liczymy pasujące modele…
November 3, 2026 Added a main cabin without hatch (RED folder) June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be…
Please click if you appreciate my work :) Biturbo. V12. Wall-mounted dominance. This 3D printable model of the Mercedes-Benz SL65 AMG (R230) transforms the muscular German luxury roadster into a sleek wall-mounted sculpture. The iconic…
44mm x 37mm 6mm keyring hole 4.8mm tall (4mm base and .8mm color switch)
This is a model of the Mercedes Benz 190E Trunk Badge. I've looked everywhere for the original and have not found it so I decided to make one myself. It's not perfect, and it's not 100% up to scale but it's very close to the original size…
Wall Art Silhouette model of the Mercedes AMG GT black series. Adjustable size. I accept model suggestions or ideas.
Scritte sul retro mercedes Amg A220 e C43 Logo Amg A220 C43
This was specifically designed for my 1999 SL-Class r129. I have been told this same design applies to w124, and w140 models which have the Sacco accent cladding, but I am unable to confirm. (Please let me know if you can confirm this!)…
Very nice and classy Mercedes C123 Coupé Wall Art.size can be customized as wanted Accept suggestions for my next models
This cover is located on the top edge of the tailgate door trim on Mercedes-Benz W124 estate/wagon/kombi models. The plastic gets brittle with age and the latches brake off. I've printed mine from PETG to allow the part to flex a little.…
This is a 1:1 copy of the original MB W126 side skirt fastener. Printed in PETG. Print settings: -0.1mm layer height -Organic supports -4 perimeters
MB part no. A0008243699 Mercedes-Benz W124 estate (kombi) rear wiper motor shaft dust cover, with o-ring shaft seal slot. Tested for fit on an 1993 S124. Print instructions Recommended to print with premium quality filament, like…
Replacement boot badges for the estate / kombi version of W124 series Mercedes-Benz, optimised for 3D printing.
Mercedes CLA Shooting Brake keychain
Thus is Hood Release Latch for Mercedes CL500 W215. This is very hard to find online for purchase, so I modelled it. Better print it using PETG to handle better outdoor temp or even ABS. I test printed it using PLA and PETG but not ABS.
Inside of older MB cars knob. Sometime need small adjustment by knife :-) PETG - 15mm
This is a remix of this thingiverse post: https://www.thingiverse.com/thing:2965408 If you find the models useful please like and share with friends. I will upload more versions with different logos when I have the time. Feel free to…
Mercedes car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 70 or 80% to make it more comfortable and less bulky.
Designed to fit snugly in the center of mass in the model. One screw seems to be enough to hold against the wall I recommend printing it with at least 6 walls, 35% infill, tree supports.
A removable token for a shopping cart. I will make more if requested. Printer brand: Creality Printer: Ender 3 S1 Pro Rafts: No Supports: No Resolution: .2 Infill: WHATEVER Filament brand: WHATEVER Filament color: WHATEVER Filament…
🚗 Mercedes-AMG GT Black Series – Scale 1:18 🖤 Get ready for an extraordinary 3D model in 1:18 scale! This detailed Mercedes-AMG GT Black Series will delight every car and model enthusiast! ✨ 🖨 3D Printing: The model requires supports –…
This is a silhouette model of the car. The default stl is approximately 40cm and 2mm thick. You can scale it as you like in your slicer, but don't scale it uniformly, otherwise the thickness will change (try to keep 2-3mm). Add…
Mercedes Benz 190E Easy to print. Of course you can scale it the size you want. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on the wall. Invisible and easy to remove. If you like to see more car…
Stand with nose up
Print in Place Mercedes-Benz G-Wagen G 63. Took almost 16hrs to print at .16 layer height with %15 infill used about 76 grams of filament. no supports needed but it may get some stringing around the pillars.
Mercedes AMG GT Black Series Easy to print . Of course you can scale it the size you want. Easy to print for up to 90cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided…
Mercedes AMG logo in 3D. 5mm high.
Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…
Cut in two halfes for better printing
Ich habe hier einen Regenschirmhalter für VAG modele Konstruiert Dieser wird ganz einfach am Top Tether eingeklippst Gedruckt habe ich das ganze aus ASA mit 3 Wandlinien und 15% Füllung
A smartphone stand or holder with the Mercedes Benz Star on it.
A simple yet detailed Mercedes logo that is meant to be printed all silver.
Capture the thrilling world of GT3 racing with this 3D printable STL model of the Mercedes-Benz AMG GT3 Evo. This powerful GT3 racing car model is perfect for motorsport enthusiasts and sim racers looking to display the aerodynamic…
The keychain is large (6,8cm), opt for 75% or 50% but also small I do not know if with a nozzle 0.4mm we will see the writings well For the double color if you use cura mine crash when I put both files at the same time. So put the files…
A few detailed and precise models of a Mercedes logo with various versions including one with a hook for a key ring.
cup holder with coin solt Print instructions Unassociated tags: getränkehalter Category: Automotive
can be printed together or separately in other colours can be printed without support card contains mercedes keychain the mercedes is very realistic Print in place kit card , Assembly required
Welcome to my first published model! This is a wall mount for the Technic Mercedes F1 car. The majority of mounts for this car require supports and/or are printed in an orientation where the car will be pulling against the layer lines -…
Here is my latest project, a remaster of this Mercedes-Benz Sprinter van that I shared on other platforms a few years ago. I updated the bottom to make it flat and added some little details. I also created a new multi-color version for…
Maqueta del Mercedes de F1 2020
Follow us on Instagram: https://www.instagram.com/sektor7_studios_3d/ Hello everyone :) Attention MERCEDES-BENZ fans. I have designed a very cool string art stand with MERCEDES-BENZ LOGO for you. Both the stand and the Venom string art…
Lego Technic Mercedes-AMG F1 W14 E (42171) Wall mount to mount the facing nose down. Hooks in so can not fall out and pulls car to the wall slightly so all 4 wheels are touching still.
This is a better hood ornament clone than others on thingiverse, but still not the best. This is one of my first models, so please don't expect it to be that great. I couldn't find a good Mercedes hood ornament without supports that I…
Update: Mercedes auf Wunsch!
Just glue a threaded rod in the hole witch can help you fasten the parking pole. Grind the surface and paint it with mirror spray.
This is a replica model for Mercedes Roadster 1960 (WIP). I'm not sure if it is possible to connect pins & tires to main since the body has fender skirt. Please feedback. update01 : I've added main body parts one by one for remix editors.…
Wanna get the commercial license? Have a look at my printables club. I didn't like the original cupholder for my e-class so I made my own. The original holds just the cups, but I wanted it to be also my phone holder. I also had a little…
Mercedes SSK year 1929 scale 1:24 designer Ed van der Heijden Description Mercedus SSK year 1929 scale 1:24 The interior including steering wheel is interchangeable and the roof can also be removed and put on. Soon the 3 models will be…
Doorstop for a Mercedes Sprinter side door. Stops the door halfway (or where ever you want it to). Attaches to roller track with double-sided tape and acts as a trap for the door roller. Door can be pushed over and past the stop to fully…
A display stand specifically designed for LEGO® Technic Mercedes-AMG F1 W14 E Performance Pull-Back (42165) It’s stable and balanced enough that it won’t fall forward, so you don’t need to worry about it. There is a version without the…
MERCEDES-W124-500E Silhouette
Mercedes Key Fob Battery Cover (Also fits some Maybach models if you have rich friends)
Designed after the Original part. The 3D Model was drawn in SolidWorks.
Bring the power of modern trucking to your collection with this 3D printable STL model of the Mercedes-Benz Actros Truck. This heavy-duty truck model is perfect for truck enthusiasts and fans of commercial vehicles, showcasing robust…
Es ist ein Schlüsselanhänger
This is a part of the cabin design of my Unimog RC project . I'm providing the 1/10 print files but also the 1/5 in case you want to use it outside the design. I'm using height range in the print files in order to get the top part as nice…
Universal MERCEDES BENZ LOGO….ML, B class…etc.
Die Faceplate ist für die montage am g29/920 anstatt der originalen Plate gedacht. Für jeden Audifan also ein muss. schreibt gerne in die Kommentare ob es sonst noch logos gibt die ihr gerne haben wollt ich werde dann mein bestes geben um…
This is the grill for my Unimog RC project ; the chassis is here and you can also browse my other models to find other UNIMOG accessories. Mounting is pretty straightforward; glue the black backgrounds (round one for the Mercedes star)…
Made this Evo2 as a first model.
Here it is the replica of Lewis Hamiltons and George Russels steering wheel. This is a static (a decorative design) model and it is not designed for simracing or similars. I hope you like it. I also leave you here the stickers that I have…
Experience the ultimate in track performance with this 3D printable STL model of the Mercedes-Benz AMG GT Black Series 2023. This track-focused supercar model is perfect for automotive enthusiasts seeking to display the aggressive…
its model of MB SLS, i cut everything from my old project 3d model for video.
Mercedes Benz logo in 3D. 5mm high.
MODEL FOR MANOMETER GAUGE TEMPERATURE, VOLTAGE, OIL PRESSURE, LAMBDA PROBE 52MM STANDARD FITS IN THE AIR WINDOW
Mercedes AMG GT, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Printed in 0.16 with modifier in slicer to have fuzzy skin on the 4 “towers” that go into the rear parcel shelf 4 walls Print on the flat side to have everything at an angle No supports needed
A detailed 3D replica of the MERCEDES AMG – inspired by iconic real-life car wheels, reimagined as a keychain or compact desk decoration . Perfect for car lovers, JDM fans, tuners, or anyone who appreciates automotive style in miniature…
-Preguntar cualquier duda del modelo, Sígueme para ayudarme a crear mas modelos, un saludo amig@. Feliz impresión 3d !!!
My friend owns stunning Mercedes Benzs SL500 R129 with 5l V8. This car definitely needs some beautiful wheels and these RH AB Topline are stunning with no doubt. But he found out that wheel caps are with no typical diameter and original…
I was not happy with the wheel disc design on the Lego McLaren F1 Car released in 2022 (Kit 42141). Designed these as a replacement. The model you see printed in the pictures was done using a variable layer height of 0.2 at the base all…
Keychain for your Mercedes, printed on Bambulab P1S. I used the 0.2mm profile to print this build.
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA The Mercedes Benz No. 1, built in 1886, marks the inception, An iconic vehicle in automotive history's collection. Crafted by Karl Benz, it…
Own a piece of motorsport history with this 3D printable STL model of the Mercedes CLK GTR. This legendary GT1 race car model is perfect for motorsport enthusiasts and collectors of iconic racing machines, showcasing aggressive…
Insert for (Mercedes) Cup Holders. Keeps your phone, keys, credit cards etc. neatly organized and always at hand. Might fit other car makes, too! The phone slot fit even an iPhone 15 Pro with case. Print with heat resistant filament ;-)
a Mercedes-Star-Wallmount or keychain. Perfect as a gift for a Mercedes-Owner.
Importing is quite small, you can just scale it up! I've found printing it diagonal like you do on resin printers works the best for this model. 10% infill worked fine, I let Cura/Creality Slicer make supports for me, they came off really…
2002 Sprinter kitcard Its designed in a way so you can open, or close the backdoors. At this tiny ratio the hinges are not the best.. Its more likely you either put the doors on as open, or as closed.. I will rework it in the following…
Mercedes Logo Stencil. Designed for Carpet Pile Finishing, adding customer logo to car mats when finished valeting.
If you want to sell this print, get commercial license via patreon https://www.patreon.com/c/Artemix796 This is a decorative stand lamp inspired by the iconic brake disc design of the Mercedes AMG A perfect desk or shelf accessory for car…
Wanted a mount for the Mercedes F1 W14 42171 specifically and couldn't find one that wasn't a wall mount. Mounts the car at 30° angle with wheels about 15mm from surface. Mount location in images. Max overhang 54° if printed on front…
Lego Technic Mercedes-AMG F1 W14 E (42171) Wall mount to mount the facing nose up. Hooks in so can not fall out and pulls car to the wall slightly so all 4 wheels are touching still.
LEGO Technic Mercedes-AMG F1 42171 Horizontal Mount Printed using PETG and 0.2 mm layer Print vertical using minimal supports as shown in pic. Should take 40min max to print depending on your settings of course.
Several times in the past year, something in my pocket pushed the buttons in my keyfob… which resulted in my trunk opening (several times into the closed garage door). I got sick of this so I searched high and low for a Mercedes Smartkey…
Celebrate a pivotal era in automotive history with this 3D printable STL model of the Mercedes-Benz 190E. This classic compact executive car model is perfect for automotive enthusiasts and fans of 80s automotive design, offering a refined…
Model 20 and 21 Mercedes logo
Mercedes G-Class, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
I have made it for my 1980 g-class if you broke yours it should fit.
I made this because the small cupholder on the Mercedes Sprinter is USELESS. This adapter makes the small cupholder into the normal size one. It also includes a slit for mugs. Holds up to 4 lbs. which is a standard large water bottle full…
Water tank cap for W639 that is ideally printed in TPU. Inner most diameter is 74mm. That is the exact size of the original part. Print advise: The fit is a tad loose when using TPU. You might want to print at 98% size in the slicer. (As…
Bring the iconic presence of a luxury SUV to your collection with this 3D printable STL model of the Mercedes-Benz G63 AMG. This powerful and stylish replica is perfect for automotive enthusiasts looking to showcase rugged elegance and…
Designed to match Small size Command strips. Use 2 command strips, one on each side. The F1 logo takes some fine-tuning & creative slicing to print well, I may try to revise to print cleaner in the future. Print flat, and use supports for…
