4642 modeli
Simple to print key holder that can fit in any household. You print the hexagon platform and any number of keychains you need. I personally used glue for sticking it on the wall, however strong double-sided tape should be more than enough…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
This is my design for a case for holding Gridfinity bins. My design goals included: Clean design No Hardware Able to stand on ends and back Contents stay in place Easy to open and securely close Stackable Designed for 3D printing While I…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy-to-print flower pot with a simple and modern design. No supports needed. The planter can be resized according to your preferences, either enlarged or reduced as necessary. This design is easily printable.
Wydruk około 8,28 €–10,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== PRINT INSTRUCTIONS 6-12% infill 15% infill for tray 5 top layers 8 top layers for tray 2-3 outer walls. Tree supports for tray, build plate only. Fuzzy skin enabled for…
Wydruk około 8,17 €–9,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple but characteristinc design for a modern headphone or headset stand. Great to display or rest your device on your desk. Best to print in - no special settings required, standard print settings are just fine Happy printing!
Wydruk około 3,49 €–4,27 € nettoWstępna wycena jednego wariantu
UPDATE 29/02/2024 Some people requested bigger chamfer on the mount holes to accommodate bigger screw heads. Original 2mm chamfer Updated 3mm chamfer UPDATE 31/01/2024 After first feedback it seems that the original tolerance 0,05mm is…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
Extra strong modern wall hook, mounted using woodscrews d=4mm :)
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…
Wydruk około 3,56 €–4,36 € nettoWstępna wycena jednego wariantu
Simple, clean, modern hook. Designed to simply snap snug on to a US standard 1" drywall screw. I simply install the screws into the hook align and press into drywall to mark, screw the screws in and re-hang the hook. Print instructions…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu
About I have envisioned this chess set for quite a while, inspired by fire and steel. Since I was limited to plastic as a medium, I experimented with the board’s texture and surface patterns to achieve a metallic shine. For the black and…
Wydruk około 4,50 €–5,50 € nettoWstępna wycena jednego wariantu
A new entry into the geometric plant pot series. And yes... We really like pineapples. Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu
Modern Telescopic Phone Amplifier: Stylish Sound Enhancement Product Description: Introducing the modern telescopic phone amplifier, a stylish solution for enhancing your phone’s audio experience. This innovative design features a…
Wydruk około 7,38 €–9,02 € nettoWstępna wycena jednego wariantu
Printer: Prusa MK4 IS Filament: Coffee Bronze PETG (Metallic) Print Settings: 0.2mm SPEED Infill: 15%
Wydruk około 14,28 €–17,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple and elegant paper towel holder. Instructions Print two arms along with the rest of the files. Screw the pieces together. Optional: Pause the print at the layer near the top of the base and add some small caliber BB's evenly…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
The 2025 Christmas Tree is out! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Emerald Green & Gold The…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
This modern Trophy is designed to use new text tool in PrusaSlicer 2.6. You can modify base and badge with your own text. It is up to you. Or you can print only plain trophy without badge. I look forward to your makes Happy printing!
Wydruk około 1,95 €–2,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 6 inch (150mm) planter (or flower pot, if you prefer) prints fully in vase mode (that's "spiral outer contours" for you Cura folks). This plant has an attached overflow dish complete with drainage holes, and it all prints…
Wydruk około 9,47 €–11,57 € nettoWstępna wycena jednego wariantu
Tauchen Sie ein in die faszinierende Welt der modernen Ästhetik mit unserer 3D-gedruckten grauen Vase. Diese einzigartige Kombination aus innovativer Technologie und zeitloser Eleganz verleiht Ihrem Wohnraum einen Hauch von Raffinesse und…
Wydruk około 16,98 €–20,75 € nettoWstępna wycena jednego wariantu
Cette sculpture représente un lapin stylisé avec des lignes épurées et une esthétique moderne. Le modèle est conçu pour une impression en résine ou FDM, avec des détails fins qui capturent l'élégance du design minimaliste. Impression :…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Here is a pencil pot I designed in Fusion 360. It has 7 holes which neatly organise your equipment and stationary. Enjoy! If you are interested in finding out about the other 3D Printing related activities I do please visit my website…
Wydruk około 14,08 €–17,21 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% No supports needed Scale it as you like :)
Wydruk około 4,83 €–5,91 € nettoWstępna wycena jednego wariantu
Little Green Army Men : Modern Tank
Wydruk około 17,28 €–21,12 € nettoWstępna wycena jednego wariantu
See also my tealight holders in similar design Teelichthalter in ähnlichem Design https://www.printables.com/model/1283343-modern-tealight-holder-small-and-large-moderner-te It would be nice if you post your make. Thank you
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
max 39mm / 59mm tealights Minimal filament consumption thanks to compact design Minimaler Filamentverbrauch durch kompaktes Design See also my egg cups in similar design Eierbecher in ähnlichem Design…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Meet the Modern Reindeer — an elegant minimalist decoration with a stunning voronoi design! 🦌 Height: 135 mm ⚙ The delicate structure may require some patience when removing supports — precision pays off for a flawless finish ✨ Perfect…
Wydruk około 3,88 €–4,74 € nettoWstępna wycena jednego wariantu
This modern planter combines a modern and simple design with an easy-to-print, no-support-needed, hidden drip tray. Available in four tested sizes (9 cm, 11 cm, 13 cm, and 15 cm), it caters to a variety of plant needs. While the design…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
Elevate your space with our modern Cross Hatch Vase. Its sleek design and striking cross hatch pattern add a touch of contemporary elegance to any room. Smooth and Rough Print files included. Commercial Use: https://cults3d.com/:1854797
Wydruk około 18,21 €–22,26 € nettoWstępna wycena jednego wariantu
The classic italian knock box, re imagined for FDM printing and upgraded with features! Rod-less design for very easy and super sturdy print High rim prevents spill while knocking Wide socket for secure stand without tilting Removable TPU…
Wydruk około 10,51 €–12,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Features Gramophone-Inspired Design: A timeless aesthetic with elegant curves reminiscent of antique gramophones. Integrated Amplifier: Delivers rich, immersive sound quality. Functional Acoustic Horn: Enhances natural sound projection…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
I’ve spent a lot of time refining this geometric container, and I’m really happy with how it turned out. The goal was to create something that actually looks great in the living room or shelf while being simple to print. You don't need to…
Wydruk około 5,41 €–6,61 € nettoWstępna wycena jednego wariantu
One of the finest portable CW paddles you can buy is from Modern Morse . Aaron has made a truly fantastic morse code tool, handmade and designed in the US. Get one, you won't regret it. Then, consider swapping out the finger pieces with…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Exclusive Commercial License on Patreon: For those looking to turn their prints into profits, I offer a Commercial License on my Patreon page. By subscribing, you gain the right to sell the physical prints without sharing the digital…
Wydruk około 4,68 €–5,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Meet the Modern Gift Decor — a stylish minimalist piece that brings a modern twist to Christmas decorations! 🎁 Height: 70 mm 🕯 Compatible with the LED Flame Tea Light Candle ✨ Works perfectly as a glowing tabletop ornament or part of a…
Wydruk około 4,19 €–5,12 € nettoWstępna wycena jednego wariantu
Meet the Modern Star Ornament — a stylish minimalist decoration for your Christmas tree! ⭐ Height: 80 mm 🎄 Features a small loop at the top for easy hanging ✨ Perfect for adding a touch of modern elegance and festive sparkle to your…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
This Modern Retro Style Desk Clock is easy to print and looks great in any colour combination, and it's also easy to assemble. I printed all the parts as listed below and this will be reflected in the g.code. Otherwise use the STL files…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Unless you come up with some extra complex option yourself, you really don't need a multicolor attachment! Four types of dials in two sizes. You can't do without these parts: (cifernik) four dial variants (A, B, C, D) 15 or 20 cm option…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
printed right away no supports cura normal profile 1.30 hrs aprox. time
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
Meet the Modern Polar Bear — a sleek winter decoration with a contemporary voronoi look! 🐻❄ Height: 75 mm ⚙ The delicate structure may require some patience when removing supports — precision pays off for a flawless finish ✨ Perfect as a…
Wydruk około 4,47 €–5,47 € nettoWstępna wycena jednego wariantu
Nejlépe spojit ve sliceru, nebo slepit
Wydruk około 4,58 €–5,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A modern case with four compartments for pills and various things. For the closing mechanism 10 neodymium magnets are needed 5x3mm (diameter x height). The magnets are pressed into the holes. For the magnets in the lid, make sure the…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena jednego wariantu
Modern Catchall Bowl is a clean, architectural storage tray with a strong geometric character. The stepped interior and sharp transitions give it a structured, modern look inspired by architectural forms. Designed for keys, coins, and…
Wydruk około 6,73 €–8,22 € nettoWstępna wycena jednego wariantu
100x160mm sign, reading “we'll do moderation next week” with art of a fat cat. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
vytvořeno v tinkercad www.tinkercad.com 2022 T3D
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Infill - 20% Diametr noozle - 0,4 Filament - PLA /PET Layer heigh - 0.2 Tempature - Noozle - 210°C, Heated Bed - 40°C Without supports
Wydruk około 2,68 €–3,27 € nettoWstępna wycena jednego wariantu
It would be nice if you post your make. Thank you
Wydruk około 2,22 €–2,72 € nettoWstępna wycena jednego wariantu
These pieces have been scanned then modeled and should be reasonably dimensionally accurate to the originals. The original release included a rather odd 10.125" square checkerboard which I have also modeled and included as a multicolor…
Wydruk około 4,16 €–5,09 € nettoWstępna wycena jednego wariantu
Hey everyone! Designed a small compact modern square tray (180x180mm) to place things like keys, pens, tools and so on. As the title says, it's asymmetrical. Blending style and function in a way that a traditional symmetrical tray might…
Wydruk około 4,43 €–5,41 € nettoWstępna wycena jednego wariantu
This is my fist attempt at using Fusion 360. I needed a business card holder/display and i didn't like any that I found on Printables. It does need to be scaled up at 120% it is the perfect size I need. I used PLA and infill at 75% so its…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
Used a sine wave to create the profile of this vase. Straight neck modern look. Both shelled to 2mm and solid version (for vase mode) Fusion 360 CAD file included, adjust frequency, amplitude, offset, height, width, thickness, etc Example…
Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu
Optimized design : Robust design (5mm thick + High fillet radius to lower the stress concentration in the most critical section.) Low material-consumption Small enough to be stored. Tall enough to be stable. Print recommendations :…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
The ZenWave is a modern 3D-printed vase featuring an elegant wavy pattern that exudes tranquility and style. Perfect as a decorative element in any space, from minimalist interiors to natural zen-inspired environments. Easy to print and a…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
Modern Sculpture for table or stand
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Hey les makers ! Je vous propose aujourd'hui à la créations une corbeille a fruit moderne ! Il m'en faillais une alors je me suis lancer la dedans. Personnellement, je l'es réalisé en PETG mais libre à vous de le faire en PLA+. Bonne…
Wydruk około 15,43 €–18,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you create BambuSlicer profiles feel free to add them here: https://makerworld.com/en/models/221532 The Planter is designed to be printed with a 0.4 nozzle (and the same line width). That way the blades of the spiral will always be…
Mobile phone stand in a modern curved design. The picture shows the stand with an iPhone 11 Pro Max. Also check out my curved iPad holder and other designs.
I decided to move away from Thingiverse and as a first upload to prusas printables I chose my modern geometric pattern planters. As a bonus for printables.com I added a version drain holes in the bottom of the big pots so that you don't…
This modernly designed tea organizer and tea dispenser keeps your favorite types of tea organized and safe. The standard dimensions are 210mm x 85mm x 170mm. The tea dispenser is designed for all common tea packs. About the print…
(2.0) Update: New versions to counteract the “benchy hull line” If you're not sure what I mean by “benchy hull line”, read this article. I have rounded out the bottom interior of the planter to counteract the slight layer shift our…
Modern funnel for pouring all kinds of liquids with an air channel. Base diameter 110 mm, height 125 mm. Easily scalable in slicer. Tested in sizes from 50% to 150%, with PLA, PETG, ABS and PA(nylon) filaments. Prints quickly and easily…
Modern Wavy Vase Added files for vasemode and a solid wall version. If you want to support me or get a commercial license for this model, you can join a patreon membership: https://www.patreon.com/SabreDesign Check out more of my designs…
Modern style fruit bowl with an optional insert! Takes a firm push to get the insert in. Don't worry, you won't break it🙂…However, it's hard to get out lol
It finally happened! The day every 3D printing enthusiast dreams about. My girlfriend walked into the room on Wednesday evening, showed me a picture of a lamp, and said “can you design and print something like this for me”. Little did she…
iPad Halter in einem geschwungenen Design. Auf den Bildern ist der Halter mit einem 12.9 Zoll iPad Pro zu sehen. In der Mitte habe ich den Halter ausgenommen, damit mit dem Finger der Bildschirm nach oben gestreift werden kann. Der Halter…
Hey, I would really appreciate if you download this, and better yet, like it!! I'm completely new to this, and really want some prusameters to get some more filament. Besides, who wouldn't want this work of art in their home? It's cute,…
Nice little key tray. Easy to print. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for full customization…
Update: I have uploaded a revised version of this model that decreases the angle on the curve on the bottom of the planter to improve print quality on the overhang. This revision also improves the tolerances on the tray so the planter…
Nice rectangular key tray with curved lines and rounded corners. The ideal storage place for car keys, coins and other small items. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D…
Modern pen holder in a ribbed design. This time no round ribs, just flat ribs. Something different. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every…
Celebrate the essence of Christmas with this beautifully stylized Holy Family sculpture. Featuring smooth, flowing shapes and a modern artistic design, it captures Mary, Joseph, and baby Jesus in a serene, graceful embrace beneath the…
Here is my take on a catch all / centerpiece / snack bowl! Use it for keys, snacks, TV remotes…morning cereal? I don't judge. Three versions available: 1 Compartment, 2 compartments, and 3 comparments. Check out my other designs too! Coda…
I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…
A modern style catchall bowl. Enjoy!
The original model size corresponds to a wrist circumference of 175-180mm
Modern Elephant Figurine Very easy print! Printed with fuzzy skin effect. Fuzzy Skin: All Walls Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 If you're interested in the commercial use of my models, check the link to my Patreon…
A timeless ribbed holder for toothbrushes and toothpaste. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files…
Skull Modern Decor Figurine Read.me! I added a modifier (Bambu Slicer) to the model, which adds weight to the front part, ensuring it stands freely and is not back-heavy. This time, it's an easy print with easily removable supports.…
You can find my newest lamp designs for commercial use here. Commercial license for MODERN MACHINE. This is a premium model that has been released for free. ====================== PRINT INSTRUCTIONS 6-12% infill 5 top layers 2-3 outer…
Mounted using double sided tape. Customize to your liking using the STEP file. Suggestions are also possible :)
Upgrade your kitchen organization with this modern utensil holder! Designed with elegance and practicality in mind, this holder features three spacious compartments to store your spoons, forks, knives, or other kitchen tools. The ribbed…
Three modern style pen holders. Choose your favourite and print away! Enjoy!
For best results print with supports and 30-50% infill for durability
v3 UPDATE NOTES: This will likely be the final iteration of this project. The biggest change with v3 is that I have optimized the files to allow for the use of threaded heat inserts. Everywhere that screws previously threaded into…
This vase features a bold and modern design, perfect for stylish and unique interiors. Made with durable, lightweight,
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== PRINT INSTRUCTIONS 6-12% infill 15% infill for tray 5 top layers 8 top layers for tray 2-3 outer walls. No supports. Scale to desired size. ====================== MODERN…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
A modern fruit bowl, 228mm long, 253 mm wide and 66mm high Print with a brim. to fit it on a standard prusa MK3 or 4 scale the model to 92% If you want to support me or get commercial licenses you can join a patreon membership:…
This great minimalist dachshund statue is very close to the original and has a modern and decorative look. The little fellow has the standard dimensions of 200 mm x 190 mm x 90 mm (freely scalable). Printed with the following settings:…
Modern Horse Figurine Very easy print! Printed with fuzzy skin effect. Fuzzy Skin: All Walls Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 If you're interested in the commercial use of my models, check the link to my Patreon…
A sleek and minimalist catch-all tray bowl designed to bring both style and organization to your everyday space. Featuring smooth, flowing lines and a shallow, gently curved form, this piece offers a perfect balance between function and…
A great rectangular pencil holder printed with the Fuzzy Skin option. Settings: 0.4 and 0.15 The grooves on the sides form a beautiful design element for the desk. Have fun with the model! 🚀 Support My Work & Supercharge Your Business &…
A beautiful ribbed tea light holder. It is suitable for standard tea lights up to 40mm in size. If you want it to be larger, simply scale the holder. It is recommended to only use LED tea lights! 🚀 Support My Work & Supercharge Your…
A modern designed tray for keys and coins. Easy to print. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files…
Version 3 of a modern organizer to tidy up the little items on your desk. A version without a sticky note holder is available here: Circular Modern Desk Organizer If you have issues with large objects warping, I recommend adding a brim.…
This is an awesome gift for cat lovers, or a neat keychain item (add your own loop) Add this to your collection of my cat items!! I would really appreciate it if you would download this, I have made it creative commons attribution, so…
A modern style square catch all bowl! Enjoy and happy printing! Print Profile 1: 218 mm Diameter; 46 mm Height | Dual Colour
An abstract geometric catch bowl. I look forward to seeing your prints! Enjoy! I used the Classic Birch PLA Wood
A modern Vase. 24 cm high. I printed it with 0.6 mm Wall Line and a wall thickness of 1.2 mm and 0% Infill.
17.02.25: New added model in files: Drainage Container - Just put it under the sponge holder (see pictures!) Say goodbye to messy countertops with this modern-designed sponge holder! Featuring a unique honeycomb base, it allows your…
