50 modeli
Note: This design is not mine. The original creator of these parts is pekcitron . The parts were reworked by jltx and uploaded here . Many of you will never find / have found these parts on Thingiverse, but since I think this upgrade…
Wydruk około 5,36 €–6,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: well, I have jumped into the “remote holders contest” (for hiding them in a convenient way) too late, but I finished this model (and printed 😀) just on time design is parametric (see source file), so any book width/height is…
Wydruk około 4,47 €–5,46 € nettoWstępna wycena jednego wariantu
This print-in-place openable backpack will fit both “EASY 13” and “MINI 13” poseable jointed figures by soofazone , which have a slot for a rectangular pin on the backside of the chest piece - as opposed to “LUCKY 13” , for whom this…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
a simple wallet which looks very clean
Wydruk około 4,25 €–5,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Egg for darning socks, which can be opened into two screwable parts and contains small parts essential for sewing. Material used: PLA CRYSTAL. Only the thimble is in TPU.
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Model has got 3 parts. Upper and lower part screw together and leaf lace up to the acorn. Printed with viva la bronze and opal green PLA. In leaf gcode is colour change.
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Easy print PLA or PETG will work.
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
V poslednej dobe ma fascinujú kĺby, ktoré sú potlačené s Tlač na mieste. I have had this model in my head for a long time, finally after several tests I managed to realize it. It is a round Clip with movable arms and diameters of 20, 25,…
Result of office Avocado seed floater challenge. Printed in ONE piece. Mechanical lock. It is easy to open when the roots come out. Before use, you cut out the 1 layer brim between the lock.
openable poke ball 3 files loaded upper part lower part stick you can use 1,5mm or 2mm long screw instead of stick original size 80mmx80mm
Since there are obstacles under my desk and the drawer size is limited, common drawers cannot be fully opened and are inconvenient to use. I designed this drawer that can be fully opened. There are 2 trays with a total of 5 parts that…
Just print it :)
I originally made these doors for the Resident Evil 2 board game to integrate with the modular walls that I created, but then I got to thinking that someone might like to use the doors without the walls... so I made these! It's a real…
A pokeball that opens and closes. Great for a costume prop. Printing Print as oriented. All parts need supports. The black rings should use “organic” or “tree” supports. Everything else can use “snug” or regular supports. Post Processing…
I have mirrored the model of the Y-Rod holder of the MK3s+, so that the upper part is removable and the axles can be taken out upwards. Compared to the original Y-Rod bracket you need a total of four additional square nuts and bolts. Make…
Based on the original rod holder for the Y-axis I modified them to be openable without unmounting and calibrating the Y-carriga when for example bearings have to be changed. Only one screw is need for each holder. On the two holders for…
Instructions: Print both halves Clip them together (option) color the text with a marker or acrylic paint Cut a picture and put it inside (19x13 mm) This is a collection of all my valentines designs: ValentinesGifts Express your love in a…
A refined version of the easter egg can be found here: https://www.printables.com/model/822685-openable-easter-egg-refined ------------------------------ I needed to create a "large" easter egg for my cousin's 2-year-old daughter. The egg…
I made some openable crates that can be used in various tabletop games! I thought that it'd be fun to have them be openable, as I could then put little pieces of paper inside each one that lists what's there when they're opened up. Maybe…
Openable Avocado Seed Floater by @DominikCisar, with the unnecessary bottom "support" layer removed.
The Factor must grow! This is a model of a Factorio Wooden Chest that can open up and even store a couple circuits. See the 3mf file for my personal choice of print orientation and settings.
Half scale can model with a threaded removable lid. The pull tab should be glued on with superglue and a string can be tied to the pull tab to hang it. Stick on a label 52mm tall and 120mm around. No supports are required (print lid…
Gingerbread house with a hinged roof that can be opened. Slowly learning my way through CAD and CAM, applying what I've learned so far. I started this a little late for this contest so it's bare on the sides and back, I hope to update it…
310.0134: CAB WITH OPENABLE DOORS (print in place) Yo, the driver’s cab now got them working doors that print right in place – no extra assembly needed. They pop right outta the printer, already in the right spot. But yo, after you remove…
I just needed the bottom covered as well. probably be printed in pla, as when I tried petg it was harder to put together Category: Games
This is a slight remix of the original Fully-openable Under Desk Drawer from PeterH. The only modifications are the Outside-L1 and Outside-R1 files: the stems of the catches have been shortened so that they are more difficult to raise out…
This is my Heart-Shaped Pokeball. A random idea I had. This heart container has a hinge to allow it to open/close, with 2 notches in the front of the box to allow it to snap-shut. No external hardware required. This also prints with no…
This is a print in place foldable heart. When opened up it reveals a spot where you can glue in a photo of a loved one. To print it place it on it's back not like on my photo ;) Printed in PLA 0.1mm layer hight
Organize and hide your cables under your desk or anywhere else. Attach using double-sided tape. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.3 Infill: 30 Category: Hobby
I needed to create a "large" easter egg for my cousin's 3-year-old daughter. The egg had to be able to be opened to store candy inside. In this refinement the open and close feature of the egg has been refined. The egg itself looks more…
Openable Gonggi Set with Storage Case Enjoy the classic Korean game Gonggi with this 3D-printable, openable set—complete with a compact storage case! The gonggi pieces are designed for a smooth toss and catch, and the case keeps…
I printed this with the same settings as my avocado floater - clearly not optimal. I used a 0.6mm nozzle and a 0.36mm layer height with E3d Spoolworks Edge. Dimensions and settings are unlikely to be very critical. Print is fast, took me…
I would print it with the same parameters as the mk4 parts: Print settings: 0.20mm QUALITY Filament: PETG (tested on Prusament) 15% Grid infill You will also need for each holder: M3 x 10 screw - 1 piece Square nut M3nS - 1 piece
A 2-in-1 Darning egg with storage inside :) 🔩 Print settings: no supports needed ⏩More of my sewing Essentials: Link: https://www.printables.com/@universalmake_168616/collections/1303275 💸 Want to sell this design commercially or support…
The model in the photo is printed with PLA 0.25mm Layer. Support are required for the cover (3) and the top (2) Use glue to connect the 2 handle part (5-9). Clean the hole before inserting the pin.
14" Laptop Stand to use with screws 2xM3x14 and 2x M3x20
Dice case openable dice dimensions 14x14x14 and 12x12x12
Unopenable Piggybank 'Safe' Piggybank 'Safe' with coin slot. unopenable - Unopenable - Size: 100x86x150mm Printing tips for supports: -'Support critical regions only'. -'Supports on build plate only'. 06-24-2026 - Rounded corners and…
I was searching for some accessories to mod for Loftyo, and I found this amazing design of a print-in-place backpack. Print Settings: Layer height: 0.2 or less Supports: On the ball joint only After printing, use a flat-ended screwdriver…
An edited version of Patrun's Travel Salt Shaker with a mirrored main body for easier refilling of the salt/spices and a smaller sieve size to screw in perfectly. This way you can just unscrew the bottom and refill, instead of unscrewing…
Two versions, both based on Canilupus original version that both share that I made the original model taller then cut the hinges to give the print-in-place hinges more clearance as the original model almost didn't break free for me. Both…
Mounting over one screw into the base Simply closed and opened with side feed Very strongly held, due to two reverse hacks Designed for three cable Also published here
use supports on drawers slides use brim on mid slides some lube on slides helps a lot ;)
The Wooden Horse of Troy, reimagined as a little rolling treasure box. Pull it along on four spoked wooden wheels, then swing open the hinged door in its back to reveal a hidden compartment inside the belly. Pure Odyssey / Iliad lore: the…
For Pokemon livers and people who like Master Pokeball.
Print with suppots. Pls like and post makes. Good luck!!!
Hello, Sharing my project of unopenable piggy bank. It's pretty simple project and there is no opening anywhere, so the money thrown inside is stuck there forever :) Dimensions: 60x60x101mm 🚀 Want to sell prints of my models? Subscribe to…
An edited version of Patrun's Travel Salt Shaker with a mirrored main body for easier refilling of the salt/spices and a smaller sieve size to screw in perfectly. This way you can just unscrew the bottom and refill, instead of unscrewing…
