Liczymy pasujące modele…
Case is for SHOKZ OpenRun Mini Headphones AfterShokz Aeropex Mini - Bone Conduction Model Number S803M UPC 850033806045 Non-Printed Parts: Less than 5" of 1/16" brass rod ~2" is kept straight and used for the hinge pin ~2" is bent and…
Wydruk około 9,49 €–11,59 € nettoWstępna wycena jednego wariantu
The combined power and volume switch of my Shokz OpenRun Pro 2 stopped working. First it lost its tactile click, then it ceased to function entirely. I assume the two little plastic plates beneath the rubber got dislodged. I carefully…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended print settings: Layer Height: 0.2 mm or less Infill % : 20 Supports: No Print Orientation: Default as modeled Material: PLA Brim: Optional Fits FCC ID SHKASCEHB9
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Do you want to make your own DIY running shoe? Use our shoe last. For more sizes and all instruction visit: www.openfootwear.com
Print with supports. Model S803BK
Replacement rubber buttons for vol up and down. Can be printed it either pla or tpu, I've found that tpu stays in very well but feels a bit mushy, while pla is a little looser but feels more tactile. Print in or around .08mm because of…
Designed for OpenRun Mini. The inner wall was moved after the photo to allow more room for the regular sized OpenRun/Aeropex/Pro version with the ends crossed. Requires a hinge pin, I used a small finishing nail
Shokz openrun charging stand V1.0 printable without supports. Please insert the cable as shown in the attached picture.. You have to install the charging jack upside down Use chopsticks or thin sticks or screwdrivers It's very easy to…
This is the same stand as 원종민 for the OpenRun headphones by shokz.
This is a remix of the Shokz OpenRun Mini Case modified for the larger Shokz OpenRun version. This remix uses two 2x4 mm neodynium magnets to secure the lid to the case. This remix has a slight tab on the back for better opening without…
https://www.printables.com/model/537632-shokz-openrun-pro-charging-base is a great charging base for the Shokz openrun pro device. I wanted something to hang on the wall before leaving/returning home though. So I sliced down the base to…
Summary I wanted a charging stand for my desk for my SHOKZ OpenRun Pro headphones. I couldn't find anything that I really liked so I created one. I printed this in PLA with 20% infill and no supports. the little hole in the top of it is…
I modified the excellent existing model by MT to work with the newer Shokz OpenRun Pro 2's. As MT recommended for their design, use a piece of 1.75mm filament for the hinge, and print the clip sideways with supports for extra strength. My…
Remix of a charging holder made by @GTMoogle I modified it to snap on to the top of my Philips monitor without needing adhesive tape. I should have printed it in PETG for a little more flexibility but with some effort the PLA snapped on…
Mounts to hold two different Shokz headsets using their magnetic charging cables. Originally designed for the top edge of a computer monitor. Should be attached with foam tape, nanotape, or something similar.
I modeled around the original design https://www.printables.com/model/537632-shokz-openrun-pro-charging-base to create something I could mount in my truck and have it be secure. I added guide/support sides and a place to add a medium…
A 3D printable, customizable, Openrun Mini by Shokz charging stand. The design uses the Shokz's easy Magsafe-like charging tech that makes it easier to charge your headphones. The model DOES need support and you might need to bring the…
I added an Ikea Skadis-compatible hook to this mount. Please print this upright with supports, so the hook won't break off. I'm not sure if this excessive amount of support material is necessary, but make sure to remove it cleanly;…
I've never been happy with the way my shokz sat on my head. The sound quality is much better if the transducers sit closer to my ear, but the the band is too large and the transducers would not stay in place. I designed this small form to…
This is a case I found on the net that I made a few modifications to, this is a great case and I added a loop to put a carabiner on to attach it to my backpack.…
I stuck it to the side of my monitor. As far as I can ascertain this will only work for the old generation OpenRun Pro, since the others all have different charging ports. Print settings (PLA, 0.2 mm layers, Bambu Studio…
I made a simple half case for the Shokz OpenRun headphones with minimal filament usage. With this case they will still fit in the original sac. The right side should be stored over the left inside the case. No supports needed, printed…
Replacement buttons for Shokz Openrun Pro 2. How to make: Print 2 of the Shokz buttons in hard plastic files. Print 1 of the Shokz buttons in TPU. Superglue the 2 prints in hard plastic to the flat side of the TPU print, on either side.…
Hooks to hold mask straps with Shokz OpenRun headphones They slip over the head band part at the back and slide around to just behind the main segments on each side. you will need to print 1 of each side as they are mirrored. the mask…
A compact charging dock for the Shokz OpenRun. The headphones snap into place magnetically while the original charging cable stays neatly routed through the back. The magnets for mounting get glued in after the print. Magnets used: 2x15mm…
I've never been happy with the way my shokz sat on my head. The sound quality is much better if the transducers sit closer to my ear, but the the band is too large and the transducers would not stay in place. I designed this small form to…
