Wyniki wyszukiwania: paddleboard

Sortowanie

Liczymy pasujące modele…

P
PrintablesMarcus Makes

Paddleboard/Kayak/Canoe Can Holder

The best can holder! Has a super snug fit and prints really nicely. I made mine out of PLA but I'm sure ASA would be perfect for the UV resistantance. PRINT SETTINGS: -No supports needed -0.2mm Layer height (Not too specific. Really…

Pobrania
596
Polubienia
151
Ocena
5
P
Printablesnano

Stand Up Paddleboard Electric Pump Adapter

SUP pump hose adapter to connect your existing hose to a low pressure air pump. While these won't inflate the SUP to the required pressure, it does get you 80% of the way there.

Pobrania
501
Polubienia
40
Ocena
5
P
Printablesafschuld

Schrader Valve Paddleboard Adapter

This adapter will allow you to connect your Schrader style bicycle or tire pump to your paddleboard for easy inflation. I am using it with a Milwaukee M18 Electric portable air pump to fill up my paddleboard on the go. I printed in PETG,…

Pobrania
406
Polubienia
55
Ocena
0
P
PrintablesTwentySix2

Low profile Stand Up Paddleboard SUP fin

I paddled in the Huron River last summer and the water was low in spots - I removed the center fin but found that the stability with only the 2 side fins was poor. This reduces the height by about 60% from a standard 9-½" fin, but still…

Pobrania
391
Polubienia
55
Ocena
0
P
PrintablesJustSomeGuy

OpenSCAD SUP Paddleboard Drink / Phone Holder

OpenSCAD SUP Paddleboard Drink Holder - Somewhat parametric for basic dimensions

Pobrania
389
Polubienia
52
Ocena
0
P
PrintablesDreamHazard

Ryobi Inflator Stand Up Paddleboard Adapter

Should print on FDM without support, I printed using automatic settings on my SLA and the output was spot on

Pobrania
354
Polubienia
42
Ocena
5
P
PrintablesSchichtschmiede

Fin for Stand Up Paddleboard

Fin for the Stand Up Paddleboard! This is a fin & a tool of a common stand-up paddleboard. My recommended settings: Filament: PETG / Resin Layer height: 0.12 Walls: 3 Supports needed Enjoy and have fun!

Pobrania
283
Polubienia
20
Ocena
0
P
PrintablesLeathercraftV

Paddleboard Fin - SUP Fin

Paddleboard (sup) fin. Designed as a spare fin in case of forgetting original fin at home. Compatible with US-Box attachment system secured by screw or by quick-click rubber pin. Recommended print from PETG with 100% infill / note that…

Pobrania
217
Polubienia
22
Ocena
5
P
PrintablesKmschr

Funwater Paddleboard Small Fin

The fins that Funwater gave me for my paddleboard were too large, so this design is to accommodate the smaller side mounting points. I printed in PLA for fitment but I recommend using a material more suited for outdoor use.

Pobrania
213
Polubienia
23
Ocena
3
P
PrintablesRadim Schuster

paddleboard go pro adapter

the base for go pro, that you can mount to any flat surface using double-sided tape, glue, etc.

Pobrania
154
Polubienia
22
Ocena
3
P
PrintablessmajlySVK

AQUA MARINA Liquid Air V1 - paddleboard pump adapter

I designed this electric pump adater for using with Aqua Marina Liquid Air V1 pump hose, to save time with inflating paddleboard. With electric pupm I can easily inflate the paddleboard to basic shape. After then I switch the hose to Aqua…

Pobrania
151
Polubienia
14
Ocena
0
P
PrintablesJakub Straka

paddleboard fin with motor holder

Ploutev pro paddleboard navržená tak aby do ní bylo možné nainstalovat dva podvodní motory

Pobrania
134
Polubienia
22
Ocena
0
P
Printablesfelik

Paddleboard can holder - 0,5L

I create my own, because with the other models I had an issues with stability and proper size for 0,5L can. Print with PETG, your standard settings, no supports are needed.

Pobrania
131
Polubienia
19
Ocena
0
P
Printablesknickers

Paddleboard fin, separated for printing

This paddleboard fin is separated so the fin can be printed flat to take advantage of the layer line strength. Glue the two pieces together and attach them to your board with the clip from the source thing:…

Pobrania
127
Polubienia
16
Ocena
0
P
Printablesaarrodri

Fin for Hyperlite Elevation Stand Up paddleboard (SUP)

I needed a shorter fin for shallow waters. Designed based on stock fin. Designed to print flat to maximize layer strength. Print the pin and add CA glue to fix it (Crazy glue). EDIT: Added the base only STL in case you want to create…

Pobrania
120
Polubienia
17
Ocena
5
P
PrintablesDmitry

SUP Paddleboard Cup Bottle can Holder (for 0.5L - 1.5L) with rubber fixation, cupholder

A heavy-duty, highly stable cup holder designed specifically for paddleboards to securely transport large water bottles (from 1 to 1.5 liters). Standard cup holders often tip over on waves due to the high center of gravity of 1.5L…

Pobrania
73
Polubienia
4
Ocena
0
P
PrintablesCharlessTheGr8

PaddleBoard Holder on wall

My settings: Printer: Ender 3 s1 Infill: 80% Filament: PETG

Pobrania
66
Polubienia
12
Ocena
0
P
PrintablesBordello_Labs

Stand Up Paddleboard SUP to Intex Pump Adapter

Connect a standard paddleboard hose to most intex pumps 12vdc

Pobrania
64
Polubienia
8
Ocena
0
P

Paddleboard pump reducer for inflating the mattress into the water

The reducer is designed for a paddleboard pump. There are 3 sizes available: 8 mm, 9 mm and 10 mm. You can use for inflating, mattresses, rings and other water attractions. The supports are used in the printing process only for the pins…

Pobrania
46
Polubienia
7
Ocena
0
P
PrintablesBakaroJo

Fishing Rod Holder for BOTE brand paddleboards/kayaks

A fishing rod holder that fits into the "slide-in Aero rac receiver" mountings included with inflatable paddleboards and kayaks sold by BOTE. I printed mine in PETG using a .4mm nozzle using a layer height of .2mm. I used 30% gyroid…

Pobrania
39
Polubienia
10
Ocena
0
P
PrintablesJan Čihák

Paddleboard_ploutev/Paddleboard_fin_for STARBOARD

Paddleboard fin for STARBOARD. Material PET-G. NO supports and brims. Glued both half after printing/slepit obě poloviny po vytisknutí.

Pobrania
38
Polubienia
4
Ocena
0
P
PrintablesTyler Davis

Paddleboard cupholder

This secures well to a Rocc standup paddleboard using the front bungie tiedowns. I would assume as long as the bungies are relatively the same thickness this would work on all board. Printed mine with ~30% infill using PLA Cheers beers

Pobrania
37
Polubienia
5
Ocena
0
P
PrintablesCANADIAN_22R

Electric pump to paddleboard adapter

Adapter to use an Electric pump on your paddleboard's hose ***WARNING ** Be careful to not overtight , snug is enough i used 80 % filling

Pobrania
33
Polubienia
4
Ocena
0
P
Printablestotalllyswede

Stand Up Paddleboard Lamp

Scaled it down to fit smaller print bed (248mm height) Changed from the M3 bolt hole design to press fit pins in the bottom of the base to attach the top of the base Adjusted the wiring hole to fit standard USB LED strip light cables…

Pobrania
32
Polubienia
8
Ocena
0
P
PrintablesPablo R
Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesCestaS

PADDLEBOARDAQUAJET

Model je tištěn ze 5 dílů. TĚLO LAVÉ a TĚLO PRÁVE spalte dvousložkovým lepidlem, odolným proti vodě. Vložte elektromotor 12V DC 12V (31ZY). Cena je do 200Kč a vyveďte napájecí dráty ven z těla pohonu. Motor zakrytujte víkem. Před…

Pobrania
28
Polubienia
8
Ocena
0
P
PrintablesFrostNight

SUP Pumpenadapter / Standuppaddleboard

Thread: 4 mm / 28mm diameter / 2 starts / 10mm thread length Diameter: 24-22mm / Slope 3 deg An adapter for an electric air pump to pump up a stand-up-paddle-board (SUP).

Pobrania
27
Polubienia
0
Ocena
0
P
PrintablesPeter Velebír

Paddleboard paddle holder

The holder is tested on these rails: https://www.kurierbedarf.com/Airlineschiene-halbrund-05-Meter-light https://www.kurierbedarf.com/Airlineschiene-Flachprofil-Light-05-Meter A magnet with a diameter of 4 mm is used to secure the…

Pobrania
24
Polubienia
6
Ocena
0
P
PrintablesJay Cary

Paddleboard cupholder

A cupholder for your paddleboard! Designed to be held tightly in place by the front or rear bungee / elastic cords (~5mm diameter) using 4 zig-zag cleats. Position near D-ring for best results. Holds standard aluminum cans with or without…

Pobrania
23
Polubienia
6
Ocena
0
P
PrintablesYeet

Paddleboard daggerboard

Experimental static daggerboard for wind surf paddle boards. The fin is made of 6 pieces glued together, with two M8 threaded rods inside as an reinforcement. Three M5x16 DIN912 screws are used to mount the fin to the base. You will also…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesTyler Leavy

SUP Paddleboard Drink / Phone Holder Remixed

Remixed to make phone holder big enough to hold phones inside clear dry bags. Also a gap between phone and drink holder to help secure on paddleboard.

Pobrania
17
Polubienia
0
Ocena
0
P
PrintablesJan Čihák

Paddleboard krytka šroubu 4mm šestihran /Paddleboard cover screw 4mm hexagon

Krytka šroubu z PET-G Materiál PET-G Bez podpor/No supports Bez límce/no brims Automatická orientace/automatical orientation Vrstva 0,2mm/layer 0,2mm Tryska 0,4mm/nozzle 0,4mm

Pobrania
17
Polubienia
1
Ocena
5
P
PrintablesBourne

SUP fin starboard river paddleboard

I created a fin that’s a little thinner and shorter than the standard USbox—so it would fit a Starboard board. Standard height about 10cm, total lenght 160mm, thickness 8,6mm. In-water area is about 12300 mm2 Vertical print, with one…

Pobrania
14
Polubienia
2
Ocena
0
P
Printablesdustin

Paddleboarding Trash Picker

Some paddles come with these things, but mine didn't. I want to pick up trash when I'm out. Hopefully I can now.

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesZSvejprty

Paddleboard držák iPhone

Paddleboard holder iPhone.

Pobrania
11
Polubienia
1
Ocena
0
P
Printableskyleonrails

Proboat Horizon Harbor RC Tugboat Paddleboard Pusher

Turn yourself into cargo with this gadget for the incurably lazy! This fits onto the back of a paddleboard (by default it’s designed for an NSP 10’ board) and allows you to push and steer yourself around with an RC tugboat. The one I used…

Pobrania
10
Polubienia
4
Ocena
0
P
PrintablesRoman Franek

paddleboard bottle holder

Printed with PLA and 40% infill. holds great. If you are planning to expose it to sun or frost daily, I reccomend using PETG, ASA, etc. ...

Pobrania
10
Polubienia
3
Ocena
0
P
PrintablesManiok

Funwater Paddleboard Pump Adapter to TR413 Car Tire Valve

This adapter connects a FunWater SUPBoard pump hose to a TR413 automotive tire valve. The design uses a threaded compression seal: when the adapter is screwed onto the hose thread, the rubber part is compressed, creating a tight and…

Pobrania
9
Polubienia
2
Ocena
0
P
PrintablesAbnut_13

Funwater Paddleboard Fin Clip

Replacement clip for the Funwater Paddleboards. Works on all 3 fins.

Pobrania
7
Polubienia
2
Ocena
0
P
PrintablesPetr A.

Tsunami Paddleboard fin / ploutev

Fin replacement splited into 2 parts which needs to be glued together. I used ASA but other material will work as well. There is no security plug or pin but fin stayed in place by tight tolerance. Designed for tsunami paddleboard but…

Pobrania
7
Polubienia
2
Ocena
0
P
PrintablesDaniel Baierl

víčko ventilu paddleboardu

Náhradní víčko k paddlebordu

Pobrania
6
Polubienia
5
Ocena
0
P
Printablesmartin r

SUP Paddleboard adapter for Flextail Tiny Pump 2X

Pasted instructions from the original creator: 1. Main Adapter Body Recommended Printer Type: Resin 3D Printer (SLA/DLP) is highly recommended for the main body to achieve smooth threads, airtight accuracy, and a precise fit into the SUP…

Pobrania
3
Polubienia
0
Ocena
0
P
Printables

víčko ventilu paddleboardu

Náhradní víčko k paddlebordu

P
Printables

Electric pump to paddleboard adapter

Adapter to use an Electric pump on your paddleboard's hose ***WARNING ** Be careful to not overtight , snug is enough i used 80 % filling