2744 modeli
Intro Opening parcels should be quick, easy and safe. This ergonomic parcel opener is designed to effortlessly cut through packing tape and cardboard without using a blade. The hook-style tip slides under the tape and cleanly slices it…
Easy to print - Easy to handle Perfect for openeing your boxes New model: https://www.printables.com/model/1113064-box-cutter-box-opener-v20-tested
Another one-handed bottle opener? Yes, but wait, there's more to it! Update June 2023 I got several reports from people that their print broke. Also not every slicer has the hexagon infill. This was bothering and I was searching for a way…
Beverage Can Opener – No more struggling with stubborn tabs or ruining your manicure! This simple but smart tool makes opening beverage cans smooth and easy. Turn off arachne mode, 3 outer walls, 20% infill, 7 bottom and top layers. ✅…
Made two new versions with a more durable tip. 2.1 New tip with wider angle 2.2 Extra edge blend added
Because of the feedback some of you had, I made this final versions witch is better in pinching tape. As always, if you have any suggestions, just let me know !!
TIP! Use lube in the bearing for optimal spinning :)
As an example what is possible to print with our Colorprint we designed Prusa Bottle Opener :D. The print is supposed to take approx. 30 minutes and the printer will ask for filament change with beeping after 25 minutes. Don’t forget to…
Beer/Pop Can Opener/Protector SIMPLE PRINTED TWIST CAP USE ON YOUR BEER AND POP CANS TO KEEP NASTY SUMMER CREATURES OUT OF YOUR COLD DRINKS OPENS AND SEAL CANS FITS STANDARD 355M TAB CANS BEER AND SOFT DRINK CANS SHOULD FIT MOST CANS POP…
The bottle opener assists people with arthritis, limited finger dexterity or other disabilities to open standard water bottle caps (⌀ 30 mm or 1.18 in). The device provides a large gripping surface and clamps onto the caps of standard…
Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
This ergonomic bottle opener is designed to easily twist off caps ranging from approximately 26mm to 34mm in diameter . Ideal for people with reduced hand strength, such as seniors or children, it features a well-shaped handle that offers…
Drill Bit Sharpener for Dremel with true Relief Angle. This jig is using a Dremel Cutting Disk for Sharpening. The 2 Parts are held together with a M3 Screw and Nut.
This is the V2 version of my ergonomic multi size bottle opener, a stronger, more robust redesign made for users who prefer extra durability and stability. Compared to the previous version, this model is reinforced, making it less…
The perfect way to open your beer !!! Shotgun + Can-opener
Support block for the Work Sharp Precision Adjust Knife Sharpener. I noticed that the V-Block Clamp would “sag” when sharpening a knife, thus producing an inconsistent sharpening angle. I designed this support block to eliminate that “sag”.
A new box opener concept WD40 can be used to make it spin better
A simple key switch opener for split housing clamps. Print it two times, stick it together, BAM! awesome working switch opener. Have a switch-puller? Use it like in the pictures for better pulls. For all your switch opening needs:…
Use Case : Printed at 101% scale to avoid any threading issues with my Dremels. Printed all four versions of the sharpener and was able to thread onto my Dremels without any clean-up or post-processing. Accessories : Dremel Lite 7760 -…
I designed a door opener to fight aganist the spread of the Coronavirus (Covid-19). You can avoid touching the doorknob with this 3D printed door opener! Please share this design so we can stop the coronavirus epidemic! Print instructions…
Older people often have trouble opening plastic bottles. Also, people with gout or other disabilities lack the strength to turn the small caps independently. The reason is the small diameter of the caps, which requires a strong grip with…
A tool that locks into the small notches at the back of Fossil watches with 37mm back cover. I printed it in PLA with a 0.25mm nozzle and 0.07mm layer height, as the pins that should lock into the notches are quite small.
Wanted to mount my garage door opener above my visor in my Tesla Model Y so I made this. You will need to glue the 2 parts together. Let me know if this also works on any other cars. Haven't been able to test on a Model 3 but it might…
Remix of Low Profile Prusa Mini Anti-Vibration Feet by Alexander Þór . This is the most effective upgrade I have made for my printer. Absolutely brilliant model. The printer wobbled after installing these dampening feet, so I modeled…
Parametric pet bottle opener. Print files are for 28.5mm diameter of cap. F3D file is included. Just change the "MAIN dimension" in the parameters. After that, you usually need to restore the "loft" function - just select the 2 areas for…
ENG Sharpen blocks of dressmaker's chalk with this sharpener. Sharp edges allow you to draw fine lines on your fabrics. It is very easy to use just move the block of chalk back and forth in the V-shaped groove at the top, until the…
Easy to print - Easy to handle Perfect for openeing your boxes
Applications and Impact: The Drinking Can Opener is designed to assist individuals with fine motor skills and/or a weak grip in opening cans. By utilizing leverage, this tool converts the "pull" action to a "push" action, making it easier…
I’ve transformed the iconic Benchy into a fully functional pencil sharpener with a hidden twist! The goal? Keep the classic boat look while integrating a discreet sharpener under its removable roof. 🎨 Clever Design: The cabin is fully…
Mine is one of these MAXIMUM sharpeners from Canadian Tire. There are similar sharpeners from many other brands (Grizzly, Craftex, King Canada), they probably all come out of the same Chinese factory. But Tormek is the Cadillac in this…
This can help you open all types of cans. When printing this you can print it upright on the build plate or you can print it sideways for on the build plate for a more stronger print. You do not need to print it with supports. Print it…
a wetstone holder and slider at 22 degrees also at 15 degree aswell
This accessory has several features that will allow you to be less in contact with possible infected surfaces: it allows you to open doors without having to touch the handle with your hand. the little finger allows you to press buttons,…
Hello. I give you the last bottle opener you will need. This design incorporates an internal cavity that you can place five 10x2mm round magnets in, or a 10x10 round magnet. I have provided a print file that has the print pause already…
Let me introduce a model of my frequently used opener. Although you can see the openers with my old logo in the pictures, you will find a plain model in the files, without a logo. You can import your own sign using Add negative volume in…
Have many useful angles and corners for opening can lids and plastic carton caps
Bottle opener for caps up to 28mm I print on 3 perimeters and infill 15%. Printed from Prusament PETG Urban Grey.
A clip for your visor that fits the Chamberlain (liftmaster) garage door remote. 2 sizes here for thick and thin visors Print in PET-G as PLA will likely soften in the heat inside car. Support is required. Sliced versions for both the…
Bottle Opener / Shopping cart coin holder, for one Euro coin. Prints works with 0.4 nozzle and support. Made for on the key chain. The Euro Coin can easily be removed for shopping. The middle slot needs support. The slider must be…
Printing and using this bottle opener will significantly increase the chances of the Buffalo Bills winning the Super Bowl. Printed in PLA with two colors. Insert a penny to allow this tool to open bottles. It is press-fit Enjoy! Go Bills!!
Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled.
A little tool to help with opening doors and pressing buttons without touching them with your hands. Use the hook for door handles and the tip for buttons and switches. The loop at the end of the grip will fit on a key ring. Only takes…
Using jblake's dimensions of his reinforced opener, I redrew it in Fusion 360 so I more quickly scale to different sizes while keeping the thickness at 14mm and the “catch tabs” at 2mm. This is the 73 mm model in the collection. Printing…
Using jblake's dimensions of his reinforced opener, I redrew it in Fusion 360 so I more quickly scale to different sizes while keeping the thickness at 14mm and the “catch tabs” at 2mm. This is the 65 mm model in the collection. Printing…
⭐ Foldable 3D Star – transforms into a Christmas Tree when opened A decorative model that combines two holiday themes in one: when closed, it forms a geometric star; when the top element is lifted, it unfolds into an eye-catching, layered…
A simple tool to open Fossil watches with 25mm diameter for changing the battery. To open the watch, firmly press the tool against the watches back and rotate the tool with the other hand. In my case it needed a bit more force than…
These were done expressly for my wife as I could find an opener aide that would fit US standard Orange juice, cream, egg whites, etc sold in cartons with a screw cap. 3 sizes 26, 29 and 40 mm seem the most popular. these aides are small…
Who hasn't got a giant novelty pencil with a dull point? Why don't the shops that sell giant novelty pencils also sell giant pencil sharpeners? Now you can sharpen your pencil and use it again! Warning. It may require giant's strength to…
Set of thematic Nucacola bottle opener, insert an useless coin inside for proper function. Coin dim.: Ø20mm x 1,9mm ±0,1 Color setup: 001.STL - Black / Blue / Yellow 002.STL - Black / Blue / Yellow 003.STL - Red / White 004.STL - Yellow /…
So my dad has a Spyderco Tri-Angle Sharpmaker, but it only has slots for 30° and 40° sharpening angles. He wanted a 35° angle so I made him this holder for it. If someone needs a custom sharpening angle just leave a comment and I'll make…
A nice small project with some moving parts and a nice model to show what is possible with your 3D printer. You dont need to press this clip closure to open it, only turn the knob 45 degrees to the right (this releases the inner part) and…
You can print with pla and 15% infill
A simple tab clamp for bleach bottle ‘tab-lock’ caps and similar. Will accommodate caps with radius 20-50mm (external tab diameter) Suitable for anyone with a weak grip or forearm strength restrictions such as MS sufferers (one in…
the " Defence Viper " letteropener Product Description: Make an impressive statement on your desk with the " Defence Viper " - a revolutionary organic-designed letter opener. Versatile Ways to Carry: Thanks to its flexible design, the "…
NOTE (Nov. 1, 2023) : See improved versions here : https://www.printables.com/model/633299-safety-cover-for-chamberlain-remote-control-garage This “safety cover” is for the model 953EV-P2 Chamberlain 3-button remote control for garage…
These super cool bottle openers make a great gift for your partner on their birthday or for your dad on Father's Day. The bottle openers are two color design printed on the front and a metal coin opener screwed into the back. The bottle…
A set of pliers and a key to losen a stuck superglue cap. Pliers inner diameter: 12.5mm. No supports needed. Set kleštiček a klíčku na uvolnění zalepeného víčka vteřinového lepidla. Vnitřní průměr kleštiček: 12,5mm. Podpěry netřeba.
Rolling knife sharpener box including room for two spare stones. Print out of PLA, precision is good enough to ensure snug fit of the top cover. Infill: 15% 3d cubic (you can block infill in the middle of slab on PLA to save a bit of time…
Easy to print stand/holder for EPaper tag (about 14 mins) ST-GR16000. Read more about OpenEPaperLink here: https://github.com/jjwbruijn/OpenEPaperLink
Držák je vytvořen pro ořezávátko 2,5 mm x 14 mm (d x š). Výška v přední části je 9 mm a v zadní 4 mm. The holder is made for a 2.5mm x 14mm (L x W) sharpener. The height in the front part is 9 mm and in the back 4 mm.
Using jblake's dimensions of his reinforced opener, I redrew it in Fusion 360 so I more quickly scale to different sizes while keeping the thickness at 14mm and the “catch tabs” at 2mm. This is the 31 mm model in the collection. Printing…
This holder will allow you to use the metal clip that you find on most standard garage door opener fobs to hold a Zooz ZEN34 z-wave switch to your car's sun visor. You can associate the switch with e.g. the Zooz ZEN17 universal relay…
First Version of the bin for my MK4. Fits on the right side of the printer in between the squash ball dampenerl.
A stylish grip for opening doors and pushing buttons. Its diameter is closely bigger than the small side of a credit card. With the retraction zipper you can mount it on the edge of your pocket and its always available.
EN ( FR ) en dessous The Horl holder on the “cruise 2” model does not allow small blades to be sharpened. I therefore propose this model for sharpening both narrow and wide blades. 4 modifications compared to the original holder: 1- More…
This is my design for a single-point bench grinder diamond dresser. Additionally, I have included an adapter so the dresser can be used on an Oregon blade sharpener. The user must supply the diamond shaft and cut ½"-13 threads on the…
WAGO 221 Keychain Multi-Tool: Strip Gauge & Lever Opener 💡 Project Summary A compact, pocket-sized 3D printed tool (keychain) designed to significantly accelerate and simplify wire preparation for WAGO Series 221 splicing connectors. This…
ITA Ho realizzato questo portachiavi anni fa come uno dei miei primi progetti. E' difficile trovare on line un file modificabile quindi includo il file .step per utilizzarlo e remixarlo con il vostro logo e soprattutto con la vostra…
Open your door and touch any button without any risk of getting infected. With a simple screw and slide mechanism, you can open your favorite door or call your favorite elevator and not touch a single thing. You don't even have to touch…
Two versions avaliable: 15x4mm magnets or 12x3mm magnets. Both need an aditional 8x3mm magnet. Stop the print twice, one for the two botom magnets and another for the top magnet.
If you got problems opening the Alfi Bottle, this “wrench” is here to help.
Pencil sharpener holder that prevents graphite powder from spilling when the sharpener is tilted.
The extraordinarily overengineered way to automate the opening of bronzium packs in SWGoH. A classic case of illustrating the absurd by being absurd. Yes, there are easier ways to do this. Printed in PETG. Required parts: 3 count 6mmX3mm…
Background: This is a replacement for the panic button on common automotive remote key fobs. The panic button is fairly easy to activate inadvertently when the fob is in a pocket. This model is a replacement button that has a lower…
Mounts a small metal wedge sharpener under the edge of your desk, hole facing out, with a drawer underneath that catches the shavings. Sharpen a pencil one-handed without leaning down, and slide the drawer off to empty it. Two parts, four…
Nástroj pro otevření kapsiček pro kočky. Během tisku nutno vložit standardní odlamovací nůž. A tool for opening cat food pouch. A standard snap-off blade must be inserted during operation
Clamp your knife in place, fix the wet stone on the slider and just sharpen your blade. This fixture is ready to go with only 3D printed parts and therefore needs no extra hardware. You might add a couple of M3 bolts later (or similar)…
Knife letter and package opener. Print flat on build plate with 0.10mm layers and 25% infill minimum. PETG, PLA, PLA+, Carbon fiber, etc. Only 18g of filament needed for 100% infill! Multiple options for LH, RH, with and without teeth and…
A smart can opener that also works as a protective cover! Use 3 walls, 5 bottom layers + 6 top layers, 0.15 mm layer, 25% infill, no supports required. ✅ Opens drink cans easily – no more broken nails or sore fingers ✅ Doubles as a cover…
With way too much time on my hands, I decided to render my version of this handy gadget for opening soda cans from scratch in OpenSCAD. I picked a lot of dimensions off the original and this version seems to work well. More pictures and…
Soda can opener with option to use as lid for bee and other Insects, will also reduce spillage if tip over. How to use it: Open soda can Insert the soda can tap into hole in front Pull up to open the soda can Push it down to lock it on…
Inspired by walttriano conversion for an Ender. Designed for the width of the x-axis profile 20mm in my Ender 3. It has a latch that allows you to easily arrange and close the cables. Demo video: Status of this project: First release v1.0…
A compact and ergonomic 3D printable box opener designed for safely cutting cardboard boxes and shipping packages without damaging the contents. This 3D printable box opener is designed for everyday use in workshops, warehouses, offices,…
Meet Rocket Tab, a fun and functional soda can opener and lid that keeps bugs and bees out of your drink while you're outdoors — and seals things up if you're saving that fizz for later. The "PULL" tab design makes opening cans easier…
The tool serves two functions : Can opener – provides extra leverage for easily lifting the can tab Can lid – covers the opening of the can to help keep dust, insects, and debris out between sips The design has been tested on multiple can…
Now This is FUN! Guaranteed hilarious fun in any situation when you brought this with you as a gift or just for the fun Now This is FUN! Guaranteed hilarious fun in any situation when you brought this with you as a gift or just for the…
Hello everyone, here are the print instructions: 0,3mm 5 perimeters (for additional strength) 100% Infill PLA or PETG (PLA is strong enough to open countless bottles) No supports needed Happy Printing and Na zdraví!
A compact and practical 3D printable box opener designed for safely opening cardboard boxes, parcels, and packaging materials. This compact box opener is a practical everyday tool designed for quickly and safely opening cardboard boxes…
The Nail‑Saver Can Tab Opener is a compact and clever accessory designed to lift can tabs effortlessly—without hurting your fingers or risking broken nails. Its angled geometry slides easily under the tab, while the body provides the…
Bottle Opener for Screw & Crown Caps. Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original models on MW…
Hast du Probleme eine PET-Flasche zu öffnen oder kennst jemanden, der dringend Hilfe benötigt? Dann bist du hier genau richtig. Dieser Flaschenöffner ist ideal für ältere Menschen, Menschen mit Gicht oder Rheuma, also Menschen, die nicht…
I designed this universal bottle cap opener with a lever-based mechanism for easy opening of water bottle caps ranging from 27-35 mm in diameter . Use 3 perimeters + 30% infill. 🔹 Features: ✅ Ergonomic Lever Design: Uses a simple…
Beschreibung Ich habe ein Hybrid Modell erstellt nachdem es bereits den einen oder anden Dosen- und Flaschenverschluss gab habe ich die beiden kombiniert. (der Dosenverschluss kann auch zum Öffnen genommen werden. Drucken kann man ihn aus…
Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…
Opening the new Prusament spool with the locking mechanism may require a stronger force. We suggest using this simple tool to make unlocking the spool easier. Update: March 17, 2026 : We’re excited to introduce the new PROFI version of…
I remixed this awesome model of Patrick Star to turn it into a bottle opener using a €0,05 coin! Other coins might fit as well! Print the model Glue a 5c coin inside Get a beer and enjoy! Category: Kitchen & Dining
Remixed Whetstone block, to be used with knife to slide along the block maintaining the correct knife angle. 4 x different angled sliders to get suitable angle. Common Sharpening Angles: Pocket Knives- 20° Hunting Knives- 25° Fillet…
Can Opener “Pistol Style” — Trigger-Activated Pull Tab Opener Short Description 3D printed tool designed to open can tabs easily. Just hook the tab into the slot, point the arrow toward the lid, and press the trigger-like tab underneath —…
Change log: New version Added (BottleCap Design) 360°ɹǝuǝdo ǝlʇʇoq allows you to open your bottle in360 different directions! Printsettings: Nozzle: 0.4mm Layer: 0.2-0.3mm Infill: 25-35% Perimeters: 3 Bottom/Top layers: 3/3 Seethrough…
