9 modeli
Pins and Tabs used for registration of multi-color relief prints. Print at least two Pins and then as many tabs as you need to do a print run. When printed the tabs should fit tight into the pins. This is by design. Depending on your…
STLs for 3d printing a hard brayer. You could use it without rubber to make a roller for applying pressure. My settings: Layer Height: 0.2 Wall line count: 2 Print Order: Inside to Outside Alternate extra wall: Yes Bottom Layers: 4 Top…
Scale the Z thickness according to application: e.g. for intaglio useage make it thin to minimise the white border effect. ☼ FreeCAD source models included
120 mm diameter Made using the Prusa MK3S+ layer height: 0.24mm Infill: 15% Support only on bed Joined together using a 5mm threaded insert and screw
A simple registration jig for printmaking with customizable dimensions Customizer Instructions Download configurator.zip and extract it Open configurator.html in the extracted folder Change parameters as desired Click the download STL (or…
I printed it with the business side upwards. Printing upside-down might give a smoother print surface, but would be marred by any 1st-layer imperfections like squishing. ☼ FreeCAD source model included
Your piece of wood should be at least 5"(125mm) wide, and 3/4"(18mm) thick. Cut your board to the desired length and these will attach on the end. I recommend making it at least 2 inches longer than your roller. Accomodates rollers that…
to use in my printmaking class I designed this registration jig so that my students could register multi color linoleum prints using a standard 3 hole punch (only two holes are used) and it spaces out the unmounted linoleum to give a 1"…
