180 modeli
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed (Print the pipe upside down) Scale it as you like :)
General information This is my slightly modified version of this model on a different platform. Initial credit therefore goes to the original creator. I made the SD card slots tighter and removed one to make room for more Switch…
The question marks are set so the bed side will be showing for a nice finish.
100x160mm sign, reading “Do not Question the Orb” Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into which this and the rest of my sign collection fit.
100x160mm sign, reading “Question Authority”. The SNAFU Principle means that information osmosis through organizations is ever less effective as as authority is added; we must remind ourselves to ensure the integrity of signal so as not…
I know that there are already similar models on thingiverse and PrusaPrinters , however, I wanted to have one where only games go in. That's why I made a completely new design by myself. The cube is slightly larger and you can directly…
Tissue Box Cover in the Style of Mario Question Mark Block. This is designed to go over a store bought tissue box so there's no bottom. Files include a split question mark for easier printing. Print the Box and Question Marks separately…
Larger one is 150% scale. All the parts fit snug, may need a trimming on the top of the question marks depending on how rounded your printer makes corners. You need: -16 screw -4 question -1 box -1 cover -some glue
The classic Mario question mark cube. No glue needed!
After I watched the movie, I have to make something inspried by it. All model is printed and tested by myself, enjoy~ I'm a HONG KONG MAKER, Thanks, Enjoy! Visit my profile for more models and welcome to follow my social media account as…
2.5mm thick question box with cover If you like there is a Mario Box Piggy Bank :O) https://cults3d.com/:1843014
Ergonomic glass for pistachios. One hand size. Depth for finger length. 4 Voron0 printing volume If you print without a bottom and lid, small debris will fall down.
A simple remix of the Super Mario iconic question mark box to store its money. Une simple tirelire en forme du cube point d'interrogation emblématique de Mario bross. Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder…
This is the Super Mario question block created as a Piggy Bank, to collect coins. This is NOT my design, but I saw that it's not on printables yet, and it was distributed under this Creative Commons license. The original design is here:…
Modeled this up after seeing the Mario movie, my own take on the question block. Should be about 5 inches tall. Category: Props
슈퍼 마리오의 아이템 상자. 연필꽂이는 분할된 버전과 파티션이 없는 버전입니다. 즐기세요!~
Remix of: https://www.instructables.com/id/Punch-Activated-Mario-Question-Block/ by: https://www.instructables.com/member/Zachary+Goode/ check out the links for the cool original design. The only thing I designed is the green cover for…
This is a remix of the question block XL from steprock. This question block has a snap on lid that will not fall off when flipped over. This lid snaps on and off easy enough that I child can open the box. There are 2 different versions…
There are many question mark models out there, but I created this one to hold only cartridges (no SD cards) and it fits together uniquely without the need for glue. You rotate each of the white question mark panels into place, which hold…
This is a remix of "Question Block Nintendo Switch Game Cartridge/Micro SD Card Holder" by Elitecgi that's over on thingiverse . I changed it so that the center of the block is it's own part. This way, you can take my card holder model…
bill of materials: name info 4x 6x3mm Neodym magnets 4x M3x8mm SHCS steel Screw in to the Box. Super Glue For glue the magnets and the question mark.
Super Mario “?” block (Secret box + Piggy bank + Container) This Super Mario "?"cube 3D model combines a symbol of a classic videogame with functionality. The 104mm box features two interchangeable lids: a standard one for secret storage…
I bring you this amazing Planter from Nintendo World in 2 colors for single extruder printers! Super easy! Great size at 100%, 10.7 cm tall, but can be scaled up with no problem. It has 3 sides with the Question Block. Includes draining…
just a simple question mark model that you can use in your projects scale it, print it👍 So have fun printing and please leave a like!
This was designed to give you the option to use the insert or without it. The question mark itself was also designed to be sanded down a bit in order to fit the space or if you prefer to just paint the box itself if you prefer.
This is a pretty extreme hook shape. These have a tendency to dive, which I tried to counteract by adding airfoils and thus lift to the elbow area. I would not recomnend this for inexperienced throwers, since it is a bit finicky regarding…
Essentially only edited the part by ER05ONE to be able to print using dual extrusion. Can be printed without support in PLA, if cooling is very good. Category: Decor
A question block originally made by Matt Sauer (Forehead) , which is a great design by itself and is truthful to the 8-bit inspiration, remixed with three adjustments: Made it 8 times larger (twice the length for each axis) Separated the…
The inner dimensions of this planter are approximately 4" x 4" with a 4" depth (Wall Thickness of 7mm). There are 2 holes built in the bottom for drainage, and I have included an STL for the matching drip tray. Version 1: (Single Color…
A nice box container, in a form of question mark block of the supermario bros game. To make it tough, set the extrusion width at least to 1.1mm in your slicer (in prusaslicer, see “advanced”). I have a prusa mini with a 0.4mm nozzle and…
This is a remix of Kickass3DPrints' Question Block cartridge case to fit 3DS / NDS game cartridges instead of Switch cartridges ( https://www.thingiverse.com/thing:2517867 ). The exterior is the same, but the interior has been modified…
This is my attempt to create a Mario question mark block type Amiibo stand. It prints easy without any supports. Use 0.2mm layer height and 7% infill with a triangular infill and 3 walls to make it beefy. The question mark object needs to…
Overview Foldable Question Block from Mario. I developed this kind of foldable printed box for my previous project https://www.printables.com/pl/model/522858-baby-yoda-box-kit-card and I decided to do another model with this fold idea. My…
Muzz64 and peachlionbasket made some quality stuff, and I just had to have the best of both worlds. Here they are! [Note: Print it with the TOP of the ? block flat against the glass.] Print Settings Printer Brand: Creality Printer: Ender…
Enjoy my Super Mario Question Block 3D Puzzle! Important: Make sure to get off your supports cleanly - also small remainings! Puzzle will not run smoothly otherwise. Assemble and disassembly a few times to smoothen it up! Print according…
Printed the original before reading the description. The original only holds sd cards. This insert can replace the original and hold up to eight Nintendo Switch Cartridges and five micro sd cards.
Its a cool Keychain of a Lucky Block! its small and perfect for your keys, bag or anywhere!
Add the base of the box. Need 6*3 magnet 16pics.
Dual colour christmas tree ornament. Inspired by https://www.thingiverse.com/thing:592759
This model is a re-upload of DadHacks' Nintendo Switch Question Box Cartridge Holder - sliding lid model from Thingiverse , plus an empty box version. The question mark and box screw models are re-uploads from AurelSan69's Question Block…
If you're having trouble fitting the question marks in place, try sanding or slicing back the bottom edge 1mm or you co
dnd miniatures for random encounter or hiden monster. the G code file is already suported
A 2 part hanging decoration, hollow so treats/gifts can be put inside, 100% scale is 50mm X 50mm X 50mm Instructions Just print in the orientation provided, bridging of the question marks are required on the bottom, but the rest prints…
This remix of Zack Freedman’s Hextraction Secret Tiles introduces an alternative lid design. Instead of a flat question mark, this design is inspired by the Question Blocks found in the popular Nintendo Super Mario games. Learn more about…
Support me by checking out OctoEveryWere Here Please Consider following me for more designs Super Mario question box for coins Print settings: Layer height: 0.2 or 0.25 Infill: 15% Grid Print Material: Inland white PLA Print Speed: 80…
Mario Question Block Pen Holder - Print as is without any support. You can scale the model as big as you want. I'm also including the Blender project file if you want to customise the model.
This cool Question-Block Lamp is the perfect design element in your room. You can print it without a multi material unit. To get the color swap you have to change the material at a certain hight (depending on layerheight - Look at the…
See description of the original model :) https://www.printables.com/model/921673-mario-question-mark-block
I edited a face plate to fit a cord through the back of the block instead of drilling a hole and mounting the whole block to a light fixture.
This is a remix of my tissue box. It has thicker walls so it can be resized and remain water tight and drain holes. There are three versions The regular version is designed to be used with the galaxy corner dots or if you have another way…
Yet another Mario Question Mark Block. I designed it very sturdy, because I want to use four cubes as feet for my TV. Its dimension is 10 cm x 10 cm x 10 cm. Easy to assemble and glue. It's a multi part model. Two times three parts for…
This is supposed to be printed in base mode (unless you want a solid block?) Great for storage or as an actual vase.
Note that the models in the .3mf file are printed at 110% and 180% respectively ¿Edit: Added inverted version?
Very easy to print and assemble trophy. I spray painted the question mark gold to make it stand out from the base. Category: Sculptures
Add some mario blocks to your gridfinity collection I am just starting adopting gridfinity, and i love it. I was about to print some yellow ones and it reminded me of mario blocks, so i needed a mario block to exist . and now it does :)…
My wife needed cupcake toppers for a baby gender reveal party. I designed and made these and they worked perfectly. Category: Decor
Super Mario Question Piggy bank
A sand mold inspired by the question blocks from Mario games!
Tip: If it does not fit first try you can scale it in the slicer or carefully use a knife to fit it to size. Update: Improved the design and adjusted the tolerances
Remixed Model Source From Thingiverse: https://www.thingiverse.com/thing:1721234/remixes Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 25%-30% Filament brand: esun Filament color: yellow Filament…
Remix of my mystery box for switch cartridges but empty so you can store whatever! I also made some changes to make it print easier. The “depth” is gone but still has “guide slots” for easy placement. Just use super glue and good to go.…
A latching case for NDS, 3DS and NS games. Print tolerance_check.stl to dial in fitment if you want to save filament. 4 parts snap into place after printing. Supports required.
I overhauled the awesome Model to fit with my XXL Tissue Box. The Tissue Box XXL from my Local ist store has the form factor 14cm x 14cm x 13cm I also improved some details: -add an other project (Box Cover) to merge both -changed the…
The Question Block Vase is a playful and nostalgic design inspired by the iconic question blocks from the world of Mario. With its pixelated question mark and bold cube shape, this vase brings the magic of retro gaming to life in your…
Just a small token to indicate effects on some games. We use it for Confusion in Warmaster. You can switch colors to make the vertical stand in other color, like black. It already has a small removible support, so print it without them.
I have remixed the cover and a mario question block to make this qr code cover for Ender 3 V2. It snap fit nicely. I've glued the yellow and white parts togheter. No supports 0.2 layer height 0.4 nozzle
A box for storing Nintendo Switch games in, the design of a question block. The box measures 10cm x 10cm x 10cm and has space for two trays inside.
I liked the idea but want to have one for SD and Mircro SD Cards. That's the whole story. If you like to, check out my other designs too!
A box/container for Smart10-game question cards. Box/container has 8 compartments, each compartment fits 50 cards = 400 cards.
This model is compatible with the lego system.
This is my take on the iconic Question Mark Box from the Super Mario Bros franchise. I'm sure there's no shortage of models for this, but I took it on as a challenge to quickly build this from scratch. And in that effort, I'd say I…
I specifically created this token to replace the beads used as surveillance tokens in burncycle, but wanted a simple 3d design that can be used as a generic point of interest or exploration token in board games or wargames. Printed in…
I recomend to print the buttons with 0,1mm layer to get a good filament change at the needed height. Happy printing!
Question and Riddle tokens, or objective markers, that can be used for the Batman Miniature Game (https://www.batman-miniaturegame.com/) or other miniature games. This pack contains three different tokens, each on 22mm and 30mm bases. All…
The Benchy was originally created to test 3D printers. Then someone thought: "What if we filled it with Easter bunnies instead?" And here we are. This is the Bunny Benchy , a boat packed with rabbits, decorated eggs, and design decisions…
Seperate question mark that fits in the Mystery Box Coaster
To be used with: https://www.printables.com/model/925911-mario-question-block-planter-pot Has space for some water collection under the block. When I printed it, it came out a bit larger than I expected so there was extra wiggle room…
Following additional Hardware is required. Six M3 Threaded Inserts Six M3x6 Screws One MagSafe Puck No need for super glue. The white elements snap into place. Fyi I designed it for a Baseus Charger. I also have a model for the genuine…
I removed the lip from the lid and fit 4x1.4mm magnet holes in it. Also made bolts to go in the holes. Prints great with no supports. Print Settings Printer: Ender 3 Supports: No Resolution: .2 Infill: 20 Filament: Hatchbox PLA Silk Gold,…
Pop-up switch games case, with the idea based on hitting a question block in a Super Mario game. Useful for storage and nice for display. Pushing the button raises the games tray holding up to 9 switch cartridges, and pops the lid open.…
Question Mark logo knob, 6mm ID for splined potentiometer. 0.20mm layer height, 0.40mm nozzle Brim No Supports In my experience, thermal coefficient of expansion varies between filament types. This is a tight fit that works well for…
Organizer with a mario question block shape. The main block measures 90 × 90 × 50 mm and attaches securely to whiteboard/fridge. Designed with five magnets slots: Four slots 20 × 10 × 2 mm One 17 × 17 × 2 mm Magnets and parts should be…
This model comes in two flavours: the first one is smoothed, the other one is styled with question marks and dots. You can print both easily without any support and you need coke bottle caps to close them! Four of them perfectly fit in a…
A simple Answer Questions sign for MMU printing.
Nintendo Switch card holder. a practical cube with 5 places to store the betting slips and plenty of space to store everything you want. Cube designed to be printed one color at a time and glued. leyer height 0.1 structure 3 pla
English This invention has made us all rich. Especially Homer! It's simple and ingenious and it fits right in the palm of the hand. Every person in America now owns one of these. And in many cases, three or four! Designed for a 0.4…
Print in Vase mode
This print is based on similar items sold online, but recreated in my own design. The print includes these parts : post hooks (2) base pendulum rod pendulum bob (magnet holder) "caps" (2) labeled YES and NO In addition to the printed…
Question? Answear! Simple. Ready for two colors of filament. Print works well with 0,2 mm or even 0,3 mm layer heigh (0,4 mm nozzle). Print of both earrings takes less than 20 minutes. If you print this thing, I will be happy to see your…
This is a really cool Mario themed light switch cover designed like a question mark block. I don't have a multicolor printer, so I printed this in white and painted it yellow with Acrylic paints. Feel free to do the same or use a…
Easy Print with or without Multicolor Printer. The File has a Pause added at 3.2mm . Just change filament and press Resume.
Super Mario question block keychain Something fun to attach to your keys. Color change + Enable ironing
I modeled the block from the Mario games
Question mark block with raised lettering. It prints in 3 pieces and glue is required to assemble. The lettering is thick and I love how much it protrudes. I legit “wow” moment when I assembled the first one. I designed this and other…
Question mark tile for an expansion for the Karuba game. Rules for the expansion https://cdn.haba.de/documents/familienspiele-anleitung/haba-karuba-add-on-2016.pdf Original tiles. https://www.thingiverse.com/thing:3327875
Made these magnetic-topped boxes for my nieces, for them to store their little nicknacks in. They loved them so much that I thought I would share these updated files with the community. These all print without support, and no AMS or MMU…
