Wyniki wyszukiwania: reaction

Sortowanie

Liczymy pasujące modele…

P
Printablesvoidbubble

Pelagic Maze (Coaster - Reaction-Diffusion)

Poseidon swirled his ambrosia for a while, contemplating the vastness of his watery dominion; putting down his chalice on the coaster, he noticed how most fitting its pattern was for a new maze with elegant coral, rivaling those conceited…

Pobrania
559
Polubienia
205
Ocena
5
P
PrintablesDubious20

Cube Reaction Hybrid e-bike charging port cover (Bosch)

This version of the cover relies on friction to remain attached to the bike. I believe that over time it will eventually fall off. When it does, I will redesign the cover to have a hole where I can use a wire split ring to retain the…

Pobrania
304
Polubienia
13
Ocena
5
P
Printablesvoidbubble

Alluvial Crush (Tealight holder - Reaction-Diffusion spirals)

Meandering sigils inscribe a lore of inexorable beauty. Open source version of https://cosmicjubilee.com/designs/alluvial-crush/ - available to buy now! This tealight holder features a pattern generated from a reaction-diffusion…

Pobrania
241
Polubienia
52
Ocena
4,67
P
PrintablesDrSchiduwi

CUBE Reaction Hybrid SL 625 rear light

I made a rear light holder for the CUBE Reaction Hybrid SL 625

Pobrania
173
Polubienia
18
Ocena
5
P
Printablesklimoma

agility ball (reaction) ver 2

Ball inspired by baseball training gear suitable for agility and reaction or just for fun. Printed with TPU, 3 walls + 10% infill and with support on bottom.

Pobrania
172
Polubienia
13
Ocena
0
P
PrintablesDaso

Pathfinder 2nd Edition (PF2E) Player tokens (action, reaction, hero point)

I wanted cool handouts for my players to have to help them count the number of actions/reaction they had left each round as well as a few tokens for Hero Points. Couldn't find anything I liked, so I ended up making some myself a while…

Pobrania
142
Polubienia
13
Ocena
5
P
PrintablesNikodem Bartnik

Reaction Wheel (Arduino, MPU6050)

This is a small and easy to build reaction wheel. I do not recommend building this project to beginners as it is quite hard to stabilize and properly calibrate the PID algorithm. More information about the project: Code can be found on…

Pobrania
131
Polubienia
5
Ocena
0
P
Printablesklimoma

agility ball (reaction) ver. 3

Ball inspired by baseball training gear suitable for agility and reaction or just for fun. Printed with TPU, 3 walls + 10% infill and with support on bottom. You can use more walls and the infill for more weight.

Pobrania
109
Polubienia
4
Ocena
0
P
Printablespop1280

Jetfire/Robotech/Macross Gun (ReAction scale)

I scaled down Printformers G1 Gun for the Robotech ReAction figure. I also made a new handle to fit the smaller hand. Category: Toy & Game Accessories

Pobrania
104
Polubienia
25
Ocena
0
P
PrintablesErik_Wolff

Pathfinder 2E Action & Reaction Tokens

I made these to help my group keep track of their available actions while we make the transition from D&D to PF2. I've included the individual tokens as well as a full set of 4.

Pobrania
85
Polubienia
10
Ocena
0
P
PrintablesJunckerLab

COVID-19 antibody test on a chip by microfluidic chain reaction

Yafia, M. et al. Microfluidic chain reaction of structurally programmed capillary flow events. Nature 605, 464-469 (2022). https://doi.org/10.1038/s41586-022-04683-4

Pobrania
79
Polubienia
3
Ocena
0
P
PrintablesMagat82

Kettenblattschutz Cube Reaction Hybrid Ebike

Kettenblattschutz zum anklipsen an das Ritzel, ohne Schrauben oder Werkzeug

Pobrania
77
Polubienia
7
Ocena
0
P
Printablesteeeeeee

Pathfinder 2e action and reaction tokens

Simple tokens for keeping track of actions if you want something physical

Pobrania
70
Polubienia
6
Ocena
0
P
PrintablesJunckerLab

Microfluidic Chain Reaction of Structurally Programmed Capillary Flow Events

Yafia, M. et al. Microfluidic chain reaction of structurally programmed capillary flow events. Nature 605, 464-469 (2022). https://doi.org/10.1038/s41586-022-04683-4

Pobrania
61
Polubienia
3
Ocena
0
P
PrintablesSnackez

CUBE REACTION FRAME CAP/CABLE ENTRY (TPU)

Cable Entry or Frame Cap for Cube Reaction Pro. Maybe it will fit on other Models, too. If you tried it on another Model

Pobrania
49
Polubienia
8
Ocena
0
P
PrintablesRobol

HEADSET SPACER CUBE REACTION HYBRID ONE 2023

Headset spacer, probably Superior X-road type. I have them on EMTB CUBE REACTION HYBRID ONE 625 2023. 10mm height. Printed on bambulab from ASA-CF, set High quality 0,12., 100% infill, 5mm adhesion skirt, 3 wall outlines img_6251 original…

Pobrania
44
Polubienia
7
Ocena
5
P
PrintablesOmar Kassar

1D Reaction Wheel

These are the stl files required to build a 1D reaction wheel. Check the full project on: https://github.com/o-kassar/1D-Reaction-Wheel

Pobrania
35
Polubienia
0
Ocena
0
P
PrintablesAdafruit

DIY Reaction Button

"Physical" Like Button Inspired by Facebook "Reactions". You press the button, and the number count gets displayed on the LED screen. Looks like a novelty product, but this can be used for all sorts of useful stuff like keeping track of…

Pobrania
33
Polubienia
3
Ocena
0
P
PrintablesJunckerLab

Circuit analysis and experiments identify operational window for microfluidic chain reactions

Yafia, M. et al. Microfluidic chain reaction of structurally programmed capillary flow events. Nature 605, 464-469 (2022). https://doi.org/10.1038/s41586-022-04683-4

Pobrania
31
Polubienia
1
Ocena
0
P
Printablespellcorp

Clementoni Action & Reaction Accelerator Washer

We lost the washer (for want of a better word) from the accellerator, after much trial and error and some still photos from this youtube video ( https://www.youtube.com/watch?v=MXFEPv8KBF0 ), was able to create a new one that functions…

Pobrania
26
Polubienia
1
Ocena
0
P
PrintablesAlexY

RGB LED Angry Reaction Face

An LED desk decoration shaped like the Facebook angry reaction emoji. Fits a Pro Micro sized Arduino-compatible board. Can integrate with RGB programs like iCUE with the right software: https://github.com/Legion2/CorsairLightingProtocol…

Pobrania
23
Polubienia
9
Ocena
0
P
PrintablesHeves

Choncc Duo – Resting & Wow Reactions (TFT)

A pair of Choncc figures from Teamfight Tactics, extracted from the game files and remixed for 3D printing. The set includes two versions: A relaxed Choncc lying on his back, smiling with closed eyes A surprised Choncc with a wide-eyed…

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesDaBomb008

Chain Reaction Award

I created this trophy 4 years ago when I was coaching High School Varsity Soccer. The concept was that we are only as strong as our weakest link so it was awarded to the player that made us better as a team. The reason I called it Chain…

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesJuan Gonzalez

Reaction vessel holder

Reaction vessel holder for Alinity type vessels. Used for troubleshooting.

Pobrania
19
Polubienia
5
Ocena
0
P
PrintablesBeeTinker

Cube ReactionTM Airtag holder

Airtag holder for Cube ReactionTM 2021 bike. Printed in standing orientation with help of supports and brim, best in ABS or PetG, i want try it in TPU or TPE just for fun, the countours are traced by hand, so it is not perfect, but works…

Pobrania
17
Polubienia
6
Ocena
0
P
PrintablesPrnt13DLab

Reaction Trainer – Reflex & Catch Training Tool

3D‑Printed Reaction Trainer – Reflex & Catch Training Tool Boost athletic performance with this 3D‑printed Reaction Trainer designed to challenge the brain, body, and reflexes all at once. Whether used for sports training, conditioning…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesLukaspop

Micro:bit Reaction Game

Reaction game How does this game work? A game for two players. The game engine displays an "icon" on the LEDs after a randomly long time (3-10 s) after the game restarts, and at the same time (without delay) starts a tone of 1.5 s. This…

Pobrania
13
Polubienia
1
Ocena
0
P
Printableskocyunus

DIY Reaction Timer – Arduino MAX7219 Reflex Meter

# DIY Reaction Timer ⚡⏱ Measure your reflexes in milliseconds! This pocket‑sized device pairs an **Arduino Uno**, a **MAX7219 8 × 8 LED matrix**, and a single push‑button inside a snap‑fit, screw‑free case. --- ## How It Works 1. Press…

Pobrania
11
Polubienia
3
Ocena
0
P
PrintablesMakertoMarket

Facebook Reactions - No Multicolor System

The "Love" and "Like"reaction have pieces to assemble with the objective not to use a multicolor system, you'll print them in one color The others reactions don't have cut in the body, only the mark to situate the respective pieces And…

Pobrania
11
Polubienia
5
Ocena
3
P
Printablesx2brute

Pathfinder Second Edition Action/Reaction Tokens

Tokens to help players remember if they've used all of their actions/reaction(s) Category: Toy & Game Accessories

Pobrania
10
Polubienia
2
Ocena
0
P
Printablesgillis

A Chain Reaction Trophy

The stand must be printed with Supports Everywhere. When the print is done you have to carefully remove the supports. Use a plier. The badge can be attached into the last chain link on the stand. You can set your own text in the slicer.

Pobrania
9
Polubienia
4
Ocena
0
P
PrintablesKamil Dolezel

Syncros eRide Light mudguard mount for Cube Reaction Hybrid 750

So I created small bracket, which holds it in place. Fits nicely to the frame. One M5 Bolt and nut is required. Printed with PM ASA. Needs supports.

Pobrania
9
Polubienia
2
Ocena
0
P
PrintablesMMorgan

Double Sided Turn Tracker and Reaction Coin

Double sided Multicolor Fast/Slow turn tracker with a reaction token coin to keep track of player turns in your Cosmere TTRPG system. Inspired by Daaaaale's turn tracker on makersworld this print is an original project with a space for…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesGeorgio

50ml Reaction tube Lid with extra Hole

We needed this modified lid to collect samples in the field and used an 2 ml reaction tube ( bottom cut off) as new openig for the 50ml falcon. This way we had an easy acess 50 ml tube but a safe sealed lid so the insects could not get out.

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesMixhl98

Cube Reaction Hybrid Halter für Rücklicht

Hallo zusammen, ich habe für mein Cube Reaction Hybrid Race einen Halter für ein originales Rücklicht von ACID konstruiert. Gedruckt wurde der Halter aus ASA, aber ich denke sämtliche andere Materialien dürften hierzu auch geeignet sein.…

Pobrania
7
Polubienia
2
Ocena
0
P
PrintablesRobertguy09

Chain Reaction PCB Case

Case for a Chain Reaction PCB! (Magical Drop 1) Requires: 4 - m3 x 5.7 threaded inserts 4 - m3 x ~16mm screws I printed at 0.2mm w/ 15% infill.

Pobrania
6
Polubienia
2
Ocena
0
P
PrintablesDany Sánchez

Chemistry Photoreaction Chamber - Cross-section Model

Quick educational model reverse-engineered from this picture: It is made from scratch for display and conversation-starter at a Chemistry school event. NOT using the published functional STLs, but based on them. It originates from this…

Pobrania
6
Polubienia
2
Ocena
0
P
PrintablesMartinisoft

ReactionX / Reaction Lights Mounting system

I designed a universal mounting system for the Reaction X training Pods. At the moment the system consists of case for the Pods and a cone holder for a cone with a top diameter of 50mm. The mounting system is based on a single M6 bold and…

Pobrania
6
Polubienia
0
Ocena
0
P

Emoji Reaction Die — a mood d6 that replaces the RPG reaction roll

Old-school RPGs settle "how does this monster react to you?" with a 2d6 roll and a lookup table. This is that table as one die you just read . Six faces, six attitudes, worst → best: 😠 hostile · 😒 unfriendly · 😐 neutral · 🤨 uncertain · 🙂…

Pobrania
5
Polubienia
2
Ocena
0
P
Printablesazz00

Keychain Chemical Reaction

Este es un llavero que diseñé para mis alumnos de Física y Química, el cual representa una reacción química y una pequeña explosión. Está impreso en PLA al 15% de relleno, pero al ser pequeño, no creo que el tiempo aumente mucho si…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesM2

Reaction Wheel - 775

Reaction Wheel Balancing Robot — Flywheel & Hub Self-balancing inverted pendulum robot controlled by a reaction wheel. The flywheel spins up to 4600 RPM, generating gyroscopic torque to keep the robot upright — no wheels, no legs, just…

Pobrania
2
Polubienia
1
Ocena
0
P
PrintablesCkraR

Shocked Cartoon Mouse - Jaw Drop Reaction Figurine

Bring classic cartoon comedy to your desk with this hilarious Jaw-Drop Shocked Cartoon Mouse figurine! Featuring expressive raised hands, wide eyes, and an exaggerated jaw stretched all the way to the floor, this single-piece model is a…

Pobrania
2
Polubienia
1
Ocena
0
P
Printables

Facebook Reactions - No Multicolor System

The "Love" and "Like"reaction have pieces to assemble with the objective not to use a multicolor system, you'll print them in one color The others reactions don't have cut in the body, only the mark to situate the respective pieces And…

P
Printables

Chemistry Photoreaction Chamber - Cross-section Model

Quick educational model reverse-engineered from this picture: It is made from scratch for display and conversation-starter at a Chemistry school event. NOT using the published functional STLs, but based on them. It originates from this…

P
Printables

Keychain Chemical Reaction

Este es un llavero que diseñé para mis alumnos de Física y Química, el cual representa una reacción química y una pequeña explosión. Está impreso en PLA al 15% de relleno, pero al ser pequeño, no creo que el tiempo aumente mucho si…

P
Printables

Reaction Trainer – Reflex & Catch Training Tool

3D‑Printed Reaction Trainer – Reflex & Catch Training Tool Boost athletic performance with this 3D‑printed Reaction Trainer designed to challenge the brain, body, and reflexes all at once. Whether used for sports training, conditioning…

P
Printables

ReactionX / Reaction Lights Mounting system

I designed a universal mounting system for the Reaction X training Pods. At the moment the system consists of case for the Pods and a cone holder for a cone with a top diameter of 50mm. The mounting system is based on a single M6 bold and…

P
Printables

1D Reaction Wheel

These are the stl files required to build a 1D reaction wheel. Check the full project on: https://github.com/o-kassar/1D-Reaction-Wheel