Prusaman - Josef Prusa Action Figure - Multi Material
Multi material action figure of the HERO
Wydruk około 19,34 €–23,64 € nettoWstępna wycena jednego wariantu
- Pobrania
- 166
- Polubienia
- 26
- Ocena
- 0
87 modeli
Multi material action figure of the HERO
Wydruk około 19,34 €–23,64 € nettoWstępna wycena jednego wariantu
This has been in work for few weeks, I designed it in Fusion 360 and tested with DasFilament refills. Print instructions This was designed in Fusion 360, I went through many different locking mechanisms and then came out with this one. It…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
This harddrive holder for the compact case Inter-Tech IM-1 / Sama IM01 has four 3.5" HDD drive slots and is modular (you could print just the lower two first). The individual drive holders are screwed together by a couple M3 screws. It is…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Úprava filtru Aquael Versamax FZN 2 o hladinový sběrač (sběrač použit z Sunsun JY-02)
Wydruk około 2,26 €–2,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter um ein Schraubglas anstatt eines Plastiksacks zu verwenden. Elsässer Getreidemühle GR2 Adapter to use a screw jar instead of a plastic bag. SAMAP grain mill GR2 Print Settings Printer Brand: Prusa Printer: I3 MK3S MMU2S Rafts:…
Wydruk około 3,97 €–4,85 € nettoWstępna wycena jednego wariantu
From time to time i use Samarin after too much stress, But the powder comes in these big boxes with 3x bag strips in them. It takes lots of space in the medical cabinet and almost always slides out and falls down on the floor when you…
Wydruk około 3,72 €–4,55 € nettoWstępna wycena jednego wariantu
Needed a way to mount a Galaxy S8 to my delta printer for use with Klipper Screen. You may get away with printing only 1, however for stability at higher speeds and to keep everything tight on the printer, best to print 2. I've mounted…
Wydruk około 0,85 €–1,03 € nettoWstępna wycena jednego wariantu
Adapter to use Dyson V7, V8, V10, V11, V12, and V15 accessories on the Samako Cleandetect cordless vacuum cleaner. Makes your life with a Samako Cleandetect vacuum way easier! The flexible hose from Dyson saves me a lot of back and…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena jednego wariantu
Replica of Good Samaritan Gun from Hellboy movie. Scale 1:2. Magnetic closure mecchanis with a 3x1mm neomidium magnets and glued using Milliput for a perfect alignment. With rotating gun drums and removable bullets. The optional…
Just 3d model LADA 2115 SAMARA Great Russian car (maybe)
Another revolver for the 13s, this time it's Hellboy's. P.S. Is it too small?
Bullet for my 1:2 scale Good Samaritan. https://www.printables.com/it/model/178112-good-samaritan-hellboy-gun-scale-12 Update: 04/05/2022 -add new bullet type (Granade Bullet, Hunting bullet, Holy Bullet) -Separate parts for painting it…
When your dummies just need a bit more bloodshed.
Anime Cosplay Derringer for Kaguya-sama Love is War. Artistic interpretation for ease of 3d printing. No secondary finishing required. Feels good in hand :) Yes, I know it doesn't have any sights--but, come on, a derringer is a…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Tuning parts for the excellent Good Samaritan prop (https://www.thingiverse.com/thing:4554697): Bullet split to the actual bullet and threads for easier printing to get the bullet bottom corner sharp. Alignment piece for gluing…
Prints well at 0.16mm layer height. The ones in the picture were printed at .08mm layer height. Printed in PLA both high speed and standard PLA 28.4mm wide/27mm tall/ 8.7 mm thick 3 different beads with different expressions on each. Have…
🇮🇶 مرحبا بك في العراق Welcome to Iraq This model was designed by Faiz Kamel @churnwalker21 Al-Askari Shrine , the ' Askariyya Shrine (Arabic: مرقد ٱلإمامين علي ٱلهادي وٱلحسن ٱلعسكري, Marqad al-ʾImāmayn ʿAlīy al-Hādī wal-Ḥasan al-ʿAskarīy…
Someone who brings your visions to light. Someone who turns your ideas alive. That's the real hero..... PrusaMan,, Print instructions Use Filaments instead of printing them.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
After several upgrades some panel clips on my case damaged, so I remodeled the original and decided to share. They fit: Sama IM-01 Inter-Tech IM-01 Krux Naos Tecware Fusion Any other brand based on that Sama case project I have printed…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is the gun I always wanted to print. After a long time searching and always thinking that it was missing details or that the size didn't seem right, I finally made my model. Since it's my first model, there are some problems that…
Stand for My version of the Good Samaritan . Print without supports.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a model of the Ōtori-Sama from the studio Ghibli movie “Spirited Away”. PRINTING SETTINGS -Printed with 0.16 mm layer height. -10 % infill Gyroid -No supports 💰Commercial Use💰 Want to sell prints of my models? Subscribe to my…
This is one of the first models I've made i am a amateur and any recommendations are appreciated The Sword is 110cm long or about 43 inches This Model will be updated and improved over time. The sword is cut into printable bits including…
A Yayoi Kusama Pumpkin, Modeled in Fusion 360 I used holes for the Pokadots she uses. Currently the only photos I took of are ones that I played around with the scale of. Will update when I can Printed on a Prusa mini
Separated files of "Lautrec_996" model of the Good Samaritan.
Print both pieces laying flat and material of choice, except TPU, probably wouldn't work that well. Glue both halves together and it's ready to fly! Will need to be “tuned” with blue tack/ sticky tack or similar. Place 0.50-1.0 gram…
Stackable holder for scrapbooking inks/pigments. There are three files, one for each kind of ink. You can stack them together. Tested with Lora Bailora pigment ink (big and small sizes) and Mini Distress Ink. The file called BASE MODEL is…
CC-BY-SA Canti Sama (FLCL) model by filsd . Originally uploaded to Blend Swap .
Beschreibung Scroll down for the english translation… “ SAMANTHA ” als druckbare LED- Namenslampe. Druckeinstellungen: Infill 8%, no Supports, 0.2 mm (Möglichst die Z-Naht so verstecken, dass sie an den Klebepunkten ist.) PLA (nicht…
Info: Allmost complete case rework. Many fixes from V1. This project was answer for terrible hot air trap at top of the case. Print instructions: all printed 0.2 layer height and oriented like at picture Front panel - print only 2 walls,…
With all of my Dummy 13 prints, I print the frame in PETG and then any armor or accessories in PLA+
Broke the SFX PSU Bracket that came with the case so I made this one, looks much better anyways. Leaves just enough room for a 25mm thick fan on top.
Vtuber Neurosama's Pin's in both monoblock and multi-part print for colours. Includes: Monoblock: No. 1 Button Heart Pin Star Pin Tutel Pin Multi-Part: No. 1 Button - Pink Part No. 1 Button - White Parts Tutel - Face Tutel - Shell Tutel -…
This mounts as a 1st part of filter intake. 62 mm total length, 40 mm inside sponge length, 18 mm diameter. PETG is recommended.
Hello everyone! I designed this chopstick holder after an art exhibit I saw in the Summit One building in New York. The exhibit was called “Clouds” by Yayoi Kusama. I liked the simple yet abstract concept. Hope you enjoy!
!!! New version is available https://www.printables.com/cs/model/756752-krux-naos-sama-im01-reworked-v2 !!! This is version is archived only and there will be no more updates. V2 is now active !!! New panels and fan brackets with better…
All appropriate credits are expressed on Thingiverse: CS SAMAS Kitbash by Logret - Thingiverse
Chair-sama, the ultimate being in the universe. This godly furniture is the strongest being in the tite kubo Bleach universe. Their only weakness is their desire to be reunited with table-kun.
This is a tower cooler spacer I designed for my Sama IM01 using a DeepCool AK400 Cooler. It bridges the gap between the rear cooler fan(25mm Thick) and the rear of the case to bring fresh air directly from the rear into the heatsink.…
Slajcing - Bambu studio Výplň 100% Vrstva 0,08 mm První vrstva 0,16 mm Začátek průša PETG Jet black Vrstva #8 přehoď na Neon green Průša Na vrstvě #13 přehoď na Signal white až do konce.
Samara Morgan (The Ring)
baywatch bow keychain Print Settings Rafts: No Supports: Yes Infill: 60% Category: 3D Printing
I use Samarin from time to time and usually buy the package of 36 bags, But it got tired of them taking up space in the cabinet and also wanted something more nice then the big box so made this dispenser. It can stand on it's own or be…
The jail collar has a inner diameter of 14cm. The jail ankle manacle has a inner diameter of 9cm. These pieces use 15x2mm magnets. If these pieces are scaled, use smaller/larger magnets. For the jail neck collar 2x, for the ankle manacle…
I'm brand new to 3D modeling and design, but i was inspired by Adam Savage's masterful recreation of the Samaritan from Hellboy, as well as a newfound love of ruby, to take a shot at the dark with 3D modeling, and this is the result, and…
Simplistic version of a (single) rotor of a maple fruit https://en.wikipedia.org/wiki/Samara_(fruit)
This is a mount to put an 8BitDo Ultimate C or any other XBox like controller onto the front of the SAMA IM01. It works by sliding onto the sheet metal of the front panel (~2.5mm).
I printed these in PLA, make sure the front one isn't over the exhaust at the top. I made the bottom hooks pretty wide to accommodate leaving the included folio cover on the back, feel free to make it a little tighter if you want. Highly…
TonosamaGekomon Digimon Creature Model
Matthew, Megan, Samantha, Samuel names for church stuff
Wanted a Gasamat sign for the garage and couldn't find one already made. Printed at 0.2mm layer height, color swap from white to red at layer 11 / 2.20mm, then color swap to black at layer 14 / 2.80mm. For the more basic sign: printed at…
This is a clip to extend the side panel of SAMA IM01 by 6mm It was designed to avoid interference with the side panel when trying to install Deep Cool AK400 Digital in this PC case. Please remove the original and replace it. I think it…
リリス - まちカドまぞく A container version remix Category: Sculptures
This is a tablet / portable monitor holder for the Sama Im01. It screws (3x M3 screws) into the hole spacing of the steel cover. My tablet (MiPad 6) has a magnetic back, so it stays nice and secure. However, if you intend to use it with…
Any filament type of your choice Model need 7 gram of filament Using 3x6 mm magnet.
Safety-Cap to avoid injuries Abeckkappe um Verletzungen zu vemeiden. 55mm wide profiles with 2mm thickness
リリス - まちカドまぞく Print Settings Rafts: No Supports: Yes Category: Sculptures
Li-Ion Ladechip: https://www.amazon.de/gp/product/B015IK1YYC/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1 Akku: https://www.amazon.de/gp/product/B0149ZQ01O/ref=oh\_aui\_detailpage\_o01\_s00?ie=UTF8&psc=1 HC-12 Funkmodul:…
Swarm gymbag drone. Model based on Rune's drawing. ( https://neurosama.fandom.com/wiki/The_Swarm )
A Osama Statue for all your Osama Statue needs. Size it to your liking.
Insert for Kami-Sama board game. Completely replaces the little baggies and cardboard factory insert. Should enable vertical storage if that's your thing, it's all packed in there. The files for the picture are a smidge different than…
This is a replacement part for a Remington VersaMax magazine tube cap. This is the cap that holds the magazine spring in place. I designed this shorter than the original in the hope that I might fit another shell in the magazine. I also…
After losing a bolt handle I decided to make a spare. I ordered some 5mm diameter round rod from MMC and cut to length. I filed a notch similar to the original handle. That gave me a round rod sticking out of the bolt. So I printed a…
Warnung: !!!! AUF KEINEN FALL ALS ERSATZ FÜR EINEN RAUCHMELDER BENUTZEN !!!!! Li-Ion Ladechip: https://www.amazon.de/gp/product/B015IK1YYC/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1 Akku:…
The Tesamaster is a precision micrometers with a mechanical digital counter that slides along the micrometer barrel. If the plastic slider (or key, denoted as K in manual) breaks or becomes worn out, the counter stops working or becomes…
used PETG but maybe better tpu or some other flexible material
Prop replica of the Samaritan, Hellboy's iconic oversized revolver. Great for cosplay and display. Designed to print flat on the bed, no supports needed. Recommended: 0.2 mm layer height, 3-4 walls and 20% infill for a rigid part. Split…
Público Objetivo : Personas con temblor esencial, párkinson, ataxia, parálisis cerebral o espasticidad. Problema que Resuelve : Al escribir, las manos temblorosas presionan teclas adyacentes por accidente. Además, estas personas necesitan…
Add a touch of darkness to your music collection with this 3D printable Samael logo! Created as a decorative piece for fans, it makes a great addition to your CD shelf, vinyl collection, desk or music room. Choose contrasting filament…
Any filament type of your choice Model need 7 gram of filament Using 3x6 mm magnet.
This is a mount to put an 8BitDo Ultimate C or any other XBox like controller onto the front of the SAMA IM01. It works by sliding onto the sheet metal of the front panel (~2.5mm).
3D printable topographic miniature of Samarinda - 🇮🇩 Indonesia Capture the beauty of Samarinda 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates -0.502, 117.151…
Stargate SG-1 - Col Samantha Carter (Amanda Tapping) - 1997 3D printable model.
SAVE MONEY BY BUYING MORE WITH THE ALL CHARACTERS BUNDLE: https://cults3d.com/en/3d-model/game/fear-and-hunger-2-termina-tabletop-characters-bundle-fan-art-stl Characters, enemies, and bosses mega bundle coming soon. This is a digital STL…