Schmuckständer Herz
Hier handelt es sich um einen zweiteiligen Schmuckständer für Ohrringe und Ohrstecker. Die Höhe beträgt ca. 20 cm.
Wydruk około 1,28 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 49
- Polubienia
- 5
- Ocena
- 0
113 modeli
Hier handelt es sich um einen zweiteiligen Schmuckständer für Ohrringe und Ohrstecker. Die Höhe beträgt ca. 20 cm.
Wydruk około 1,28 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Wydruk około 3,63 €–4,44 € nettoWstępna wycena jednego wariantu
Luke Ornament als Weihnachtsbaumschmuck. Die Schrift ist die Star Wars Jedi Schrift von DaFont. Ca. 10cm hoch. No supports needed/keine Supports nötig.
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Wydruk około 3,62 €–4,43 € nettoWstępna wycena jednego wariantu
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Wydruk około 4,28 €–5,23 € nettoWstępna wycena jednego wariantu
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Wydruk około 3,12 €–3,82 € nettoWstępna wycena jednego wariantu
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Wydruk około 3,58 €–4,38 € nettoWstępna wycena jednego wariantu
Hier handelt es sich um einen dreiteiligen Schmuckständer für Ohrringe und Ohrstecker. Die Höhe beträgt ca. 18 cm.
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 80mm christmas tree ornament sphere has a very nice shape and is easy to print. I recommend to use metallic filament for an even better look as mentioned on the pictures. Available in TWO versions with SLIM & MEDIUM fins. The cap is…
Recommended size is about 6 x 6 cm for 0.4 nozzle. Smaller sizes should also be possible. I printed it as name tag with an 0.25 nozzle.
change the color of the filament at 5 mm to accentuate the inlay. check out my other christmas designs: SNOWFLAKE ORNAMENTS MERRY CHRISTMAS FRÖHLICHE WEIHNACHTEN COLLECTION GNOME DEER
modified Design of the Christmas Snowflake
A tree to organise necklaces, rings and earpins/earrings in a decorative way NOTE: should be scaled up, since its a bit small if you dont! Mine is printed in PLA at 150% scale because its the lagest I could fit onto my buildplate. The two…
My daughter asked for a personal jewelry box. And this is what we both developed. The box has more tiers to store the “treasures”: In the lower part you can store the big things The middle insert can be filled with rings and earrings. So…
Deutsch: Ich habe ein Schmuckkästchen für meine Frau zum Valentinstag entworfen und wollte sie hier mit euch teilen. Die Box bietet viel Stauraum für allerlei Schmuck. Druckanweisungen: Alle Teile können in PLA oder PETG gedruckt werden.…
This 85mm long christmas tree ornament has a very nice slim shape and is easy to print. I recommend to use metallic filament for an even better look as mentioned on the pictures. The cap is made for all XMAS ornaments with a 14mm top.…
Schmuckständer in Form eines Baums/ Tree for jewelry
Gedruckt mit Bambulab X1C mit AMS Beschriftung ist individuell und die STL ist Blanco Passt für den 4,8L Topf inkl. Schüsseleinsatz und schützt vor Verschmutzungen und Staub. PETG 0,2mm Layer 0,4mm Nozzle
Mit diesem praktischen Kettenhalter kannst du deine Schmuckstücke ordentlich und übersichtlich aufbewahren. Der Halter bietet Platz für bis zu 12 Ketten oder auch Armbänder, sodass nichts mehr verknotet oder unordentlich herumliegt. Die…
sehr schnell druckbarer Weihnachtsbaumschmuck Very fast printable Christmas tree ornaments
Print-in-Place - Drucken ohne Stützen. Filament: magicPLA Magic Deep Space von 3DJake (wird vermutlich nicht mehr produziert) Alternative: magicPLA Purpur Delirium Dimensionen: Höhe 82,5 Länge 100 Breite 100 :)…
sehr schnell druckbarer Weihnachtsbaumschmuck Very fast printable Christmas tree ornaments
Just a few decorations. Another Christmas Decorations (Angels): https://www.thingiverse.com/thing:4655161 Buy me a coffee Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: Doesn't Matter Supports: Doesn't Matter Category: 3D…
Hier ein Schmuckständer für Ketten Ringe und sonstiges Kleinzeug und könnt es skalieren wie Ihr es braucht. Ihr benötigt nach dem drucken noch Kleber. Viel Spaß Ergänzung der 3 Teile als einzelne Objekte Update vom 05.07.2023: Print in…
This 65mm christmas tree ornament STAR SPHERE has 12 stars standing between the nice shaped fins. Very easy to scale & print. I recommend to use metallic filament for an even better look as mentioned on the pictures. The cap is made for…
OUTDATED : see https://www.printables.com/model/1038392-weihnachtsschmuck-glocke-2024-viele-sprachen-chris Not much to tell - it's selfdeclaring. I printed with a 0.4 mm nozzle and 0.15 mm height. No supports needed Created with OnShape →…
DE: Eine schlichte Schmuckkiste in verschiedenen Ausführungen. Ich habe den Deckel aus Eiche hergestellt und ein Modell davon ebenfalls hinzugefügt. Die Abmessungen der Box sind 200 x 80 x 43 mm. EN: A simple jewelry box available in…
Verschönere deinen Tannenbaum mit einzigartiger Dekoration. Meine Tannenbaumkugel wird ohne Support gedruckt. Nicht vergessen: einzigartiges Design keine KI keine nachbearbeiteten Fotos, nur Originalbilder eigenhändige Konstruktion selbst…
Just a little Jewelry Box which I used for an personal Gift for a good friend. It was used for a rosary (Tesbih): https://shorturl.at/jxyBR The Gift itself was just made like it is shown in the picture with one additional extra. The floor…
Dieser hochwertige Aufhängehaken ist die ideale Lösung, um Christbaumkugeln, Dekoanhänger oder kleine Bastelprojekte stilvoll und sicher zu befestigen. Das Design ist stabil, formschön und speziell für eine zuverlässige Aufhängung…
es gibt eine größer und eine kleinere Version Druck: 0,2 mm Düse: 0,4 mm Unterstützung: Nicht erforderlich Rand: Nicht erforderlich Infill: 0% Schöne Weihnachten!
A simple ornament of a snowflake. Easy print. I used matte PLA for it. Have a look on my christmas collection on makerworld.
A Christmas bell for your Christmas tree or anywhere else you want it. Currently in more than 30 languages → see the pictures. If you find the translation for “Frohe Weihnachten” or “Merry Christmas” has mistakes in your language, please…
Box für Uhren, kette, Ringe und schmuck. Kann aber auch für andere nützliche Dinge als verstauraum genutzt werden.
Verschönere deinen Tannenbaum mit einzigartiger Dekoration. Meine Schneeflocken findest du in insgesamt 35 Varianten. Du kannst für dich entscheiden, wie du das Druckbett füllst. Schnell und einfach gedruck, als Geschenk,…
Habe ein Modell für gerade Dachrinnen erstellt, die den Schmutz und das Laub zurück halten sollen. Gedruckt in PETG aufgrund der besseren Wetterbeständigkeit. Habe das Originalmodell mit angehängt, um Durchmesser oder ähnliches anzupassen.
yep the quick release buckle from the deuter schmusebär backpack got lost. the orderable replacement part does't have the right color anyway. so I designed it by my own and print it okay it snaps not so slightly like the original but it…
Verschönere deinen Tannenbaum mit einzigartiger Dekoration. Meine Tannenbaumkugeln werden ohne Support gedruckt. Nicht vergessen: einzigartiges Design keine KI keine nachbearbeiteten Fotos, nur Originalbilder eigenhändige Konstruktion…
I was tired of all that sticking tapes and designed little hook
Small jewelry stand, perfect as a gift for your loved one or simply to display your own jewelry. The jewelery stand is perfect for rings. Printed with Prusa Mini in one color with PLA Galaxy Black and two color with Bambu Lab X1C with PLA…
Buy me a coffee Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0,2mm Infill: 100% Filament: Bavaria-Filaments PLA Category: Decor
Dieser Weihnachtsstern besteht aus 3 Teilen, welche nach dem Druck noch verklebt werden müssen. Eine schöne Weihnachtszeit und viel Spaß beim Duck, über eine Rückmeldung würde ich mich freuen.
Nach dem ich ein Paar Bilder aufhängen sollte und nicht immer den Staubsauger mitnehmen wollte. Ich liebe Fusion360
Ein einfach zu druckender Weihnachtsschmuck für den Weihnachtsbaum, nutzbar auch als Anhänger auf ein Geschenk 2024. Sieht gut aus mit Rainbow oder goldenem Filament. An easy-to-print Christmas decoration for the Christmas tree, can also…
Who does not know it: dirty hands when checking the air pressure of the tires on the car / motorcycle. This is a thing of the past. With this valve opener, you simply unscrew and screw the caps back on without getting your hands dirty.…
Stabelbare Boxen für Büro Schmuck und die Werkstatt oder das Kinderzimmer über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Saw this on a card titled "Have A Christmas", so I modeled it in Fusion 360 (may have traced a bit) and printed it. Made for multi-material machines (Palette or MMU) but can probably be printed in the individual colors and glued together.…
Eine Tolle Kompakte Box um die Schmuckartikel zu verstauen.
Kevin Ornament als Weihnachtsbaumschmuck. Die Schrift ist die Star Wars Jedi Schrift von DaFont. Ca. 10cm hoch. No supports needed/keine Supports nötig.
über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Stern als Weihnachtsbaumschmuck - Star as a Christmastreeornament
hi, i had fun adding those small tiny apple logos to a cleaner. (Print time 2,5 Mins each) I think they look sweet :) - Both have a height of 1,6mm. The color change can be done on the same height for both after 1mm. So 1,2mm is the new…
Du wäschst gerne Gegenstände, welche dir wichtig sind, per Hand? Diese Dinge haben eine empfindliche Oberfläche, z.B. Lack? Du möchtest Hologramme und ähnliche Oberflächenfehler vermeiden? Und du verwendest dabei einen handelsüblichen 10l…
Das Modell ist als Deko für den Weihnachtsbaum (Christbaum) gedacht. Die grösse ist 40x55 mm damit ist er leicht genug um auf Dauer am Baum zu hängen selbst wenn er schon etwas in die Tage gekommen ist . An ein Loch zum Aufhängen hab ich…
With this wonderful heart-shaped opening, the small magnetic heart allows magical access to your gifted treasures of vouchers, jewelry and surprises. The high-quality PLA plastic construction not only gives this box an elegant feel, but…
The Earring Holder needs Support, it makes sense to use the Tree Support or use the GCodes here.
Schmutzabdeckungen für die Sitzschiene. Verhindert Dreck in der Sitzschiene wenn nicht alle Sitze im Fahrzeug verbaut sind. Pro Sitz wird je 2x Vorne und 2 x Hinten ein Cover benötigt. Der Rest wird vom Teppich abgedeckt. Zusätzlich könnt…
auch eine Möglichkeit
Verschönere deinen Tannenbaum mit einzigartiger Dekoration. Meine Tannenbaumkugel wird ohne Support gedruckt. Nicht vergessen: einzigartiges Design keine KI keine nachbearbeiteten Fotos, nur Originalbilder eigenhändige Konstruktion selbst…
This 90mm tall christmas tree ornament SNOWMAN is a cute little funny guy with orange nose. Very easy to scale & print. Slicing: It is very simple. Just make a color change under his hat so that the broom gets black, too. We recommend to…
Um auch meinen Teil zum Weihnachtsschmuck beizutragen, habe ich vom Adler Wappen eine Skizze erzeugt und diese mit einer Weihnachtskugel kombiniert. Entstanden ist dadurch eine Weihnachtskugel für alle Fans der SGE Die Kugel wird aus 2…
Hier eine sehr simple Konstruktion für die IKEA komplement Schmuckeinsatz mit 6 Fächern und mit 12 Fächern. 0,2mm wäre mein Empfehlung.
This hook is designed for hanging Christmas tree decorations . You can certainly hang up other things with it too :) Very easy to print and super quick to make. Available in 2 different thicknesses (1.8 mm && 3 mm) and a total size of 27…
über likes makes und follower würde ich mich sehr freuen, Peace MazZe
200 x 130mm with two holes 35mm storage area: 150 x 120mm and 22mm high Print Settings Printer: DIY Sidewinder X1 Rafts: No Supports: No Resolution: 0.20 Infill: 15% Filament: GIANTARM Purple PLA
Eleganter Baum als Dekoration, oder als stilvolle Aufbewahrung für Ringe, Ketten oder Armbänder. Der filigrane Korallenbaum-Design steht stabil auf quadratischer Base und dient zugleich als minimalistische Tischdeko. Perfekt für…
Verschönere deinen Tannenbaum mit einzigartiger Dekoration. Meine Tannenbaumkugel wird ohne Support gedruckt. Nicht vergessen: einzigartiges Design keine KI keine nachbearbeiteten Fotos, nur Originalbilder eigenhändige Konstruktion selbst…
Du kannst sie an den Weihnachtsbaum hängen, oder als Deko im Wohnzimmer aufhängen.🎄🎀🎁🤶🎅👼
ENG: Frame for the Sonoff T1 light switch (european version with 86x86mm). the frame is surrounded by a wide brim to protect the wall from nasty fingerprints. should be a snug fit around the T1. Made with Tinkercad. GER: Rahmen für den…
Dies sind einfache Sterne als Weihnachtsschmuck mit einer Öse.
english Mud flaps Simple mud flap for bicycles. Mounted on the mudguard under the bracket that attaches the mudguard to the axle. This only works if such a bracket is available. My myvelo-Rio has such a bracket. For other bikes with such…
Da meine Dusche fest eingelassen und der Abfluss im Zweifel nicht zu erreichen ist, habe ich zur Sicherheit dieses Teil erstellt. Der Durchmesser zum Einstecken beträgt 60mm und passt bei mir saugend in den Abfluss, über die eigentliche…
HERZ zum aufstecken eines Zahnstocher für Pflanzen
über likes makes und follower würde ich mich sehr freuen, Peace MazZe
0,2 mm Schichtdicke keine Stützen erforderlich Ich habe die Glocke mit PLA in mattem Hellbraun gedruckt, wodurch sie aussieht, als wäre sie aus Holz gearbeitet. Die Datei „Körper_Rahmen” muss insgesamt sechsmal gedruckt werden. Sie ist…
A chrisbaum for your christmas tree ;-) The chrisbaumi is the little brother of the chrisbaum. It can be hung in the Christmas tree. Before you should use it as Christmas tree decorations, please decorate it first. The candles from the…
Zum aufhängten von Schmuck
über likes makes und follower würde ich mich sehr freuen, Peace MazZe
über likes makes und follower würde ich mich sehr freuen, Peace MazZe
100% Infill PETG or PLA Layer: 0.15-0.20mm Wenn der Stab brechen sollte, kann er mit einer dünnen Schraube oder Gewindestange ersetzt werden oder weggelassen werden. - If stem breaks it can be replaced with small diameter screw or…
Da bekommt der Schmuck auch noch einen schmucken Platz zum aufheben.
Schmuck-Halskettenständer / Kopfloser athletischer Torso auf einem Marmorsockel Diese 3D-gedruckte Büste ist eine stilvolle und moderne Präsentationslösung für Schmuck—insbesondere für Halsketten. Ihr minimalistisches Design stellt die…
🖐 Uhren- & Schmuck und Ketten Halter – Stylische Hand aus dem 3D-Drucker Ein echter Hingucker für deine Lieblingsstücke! Du suchst nach einer außergewöhnlichen Möglichkeit, deine Uhren und deinen Schmuck stilvoll aufzubewahren und…
Aufnahme Trapetzgewindemutter TR8 TR10 Gewinde [mm] Tr. 10 x 3 Tr.8 x 1,5 Höhe [mm] 15 sw [mm] 17 Category: 3D Printer Parts
Ein Schmuckstück mit komischen löchern. Meine Mutter mag das. Es ist derzeit 16 mm dick (innen)
Quadratische abgerundete Box mit Löchern Einstellungen sind eigentlich egal Infill hatte ich 20%.
Ronny Ornament als Weihnachtsbaumschmuck. Ca. 10cm hoch. No supports needed/keine Supports nötig.
Die Haken im Style von Dead by Daylight. Mit Anpassung/Erweiterung kann man oben auch ein Namensschild anbringen. Wuerde ich auf nachfrage dann noch nachkonstruieren. Turm drucken., X-mal sich Haken drucken. In die Führungsschienen…
Auf Anfrage habe ich diesen Rohling für eine Basteln mit Kinder Aktion entworfen und fand diese Idee so kreativ und vielseitig sodass es mir ein anliegen war dieses mit euch zu Teilen. Ich habe es mehrfach in PETG, ASA und PLA gedruckt.…
Model Description: To avoid scrapping the entire project, I designed this replacement bolt with a hexagonal shape, allowing it to be rotated onto its side for better stability. It does require support since both ends hang in the air…
Zwei Versionen. Einmal mit, einmal ohne Blattdesign
Valentientagsgeschenk in Form eines Schmuckhalters. Dieser kann einfach mit einem Nagel in der Wand befestigt werden.
Print in PLA-CF or PETG for maximum durability. Then, use epoxy glue to glue the M14 nut into the printed part.
Dient zum Schutz des Dämpfer bei Mondraker Superfoxy