4120 modeli
Dimensions (LxWxH) 170 x 84 x 53 mm (100% scale) Basic information Great white sharks are definitely among the most fearsome and legendary ocean hunters, so it is not surprising, that everyone would love to have one in their collection.…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu
See latest version, v3.0: https://www.printables.com/model/959686-7-segment-mechanical-counter-version-30-ratchet-fo Version 2.2 of the 7-Segment mechanical counter. Improved design. This particular model is a sequential counter (numbers…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
A lightweight Key Organzier: Prevent key scratches on your phone or wallet Easy to use with one hand : push keys out with index finger and select the key you need. Perfect when carrying stuff. Customizable in slicer to fit your amount of…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Intro I was looking for a flexi-cat for giving it as a present to a cat lover, and I could not find a single-color one, so I took the Mult-color Flexi Cat by K7ZPj and adapted it to be printed using my Prusa Mini+. The original author is…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena jednego wariantu
Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of ribs (depending on the size of the ball): 10, 14, 18 and 22. Rib width 3 mm. Print the bottom part with a support so that the curve…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
- Prusa Print files added! - Presenting you: my iteration of a Roll up Chess set! Please like, share, download, rate and all the amazing good stuff :) I have seen many roll-up chess models, but none that would fit my needs. What I really…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
(for Bambu, check below) Please like, share, download and all the amazing good stuff! Since this is my final model in my "Single Extruder - Dual Color" series where I managed to put 3 colors together into one model! Not counting the…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Size: 55mm x 69mm x 43mm Filaments: PLA Jet Black (black) and PLA Vanila White (white) Note: Some parts of the model may need to be glued. Organic support recommended.
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
Size: 61mm x 47mm x 42mm Filaments: PLA Prusa Orange (orange) and PLA Vanila White (white) Note: All parts need to be glued.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…
Wydruk około 1,83 €–2,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EDIT: I forgot to add in the name kindly given to my cat by Mark "Velocity Painting" Wheadon ( https://t.co/LF6wu0B4sd ): Schrodinky! A couple of weeks ago, I posted a very cute picture on Twitter of a British Shorthair kitten sitting in…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
Single light bar for the Prusa i3 MK2/S and MK3/S/+. Mounts attach to the hexagonal holes in the z-axis tops. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of…
Wydruk około 4,23 €–5,17 € nettoWstępna wycena jednego wariantu
This is my Travel Soap Box. This has been tried and tested on many of my travels by both myself and my son. The pictures are of my actual well travelled Soap Box, over 2 years old now. The box holds a full normal size bar of soap, the…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes . The STLs for three different sizes of each style are included here for convenient printing. This model is fully…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Features: Holds pens up to 14mm in diameter Doesn't damage your pencil's tip (see drawing below) Holds pens with extended mine (no need to close pen) Secure stand There are three versions available: 12mm 14mm 9mm (Apple Pencil version…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
What colors will you choose? Ever since I designed the dual color cow I really wanted to make a poison dart / tree frog version, but none of the available 3D models were suited for this operation. In the end I decided to try and model my…
Wydruk około 1,78 €–2,17 € nettoWstępna wycena jednego wariantu
Once upon a time, I printed this: Cat Ears for Headphones by usernamexx - Thingiverse Today it broke :( So I designed my own to improve upon the design. What makes these better in my opinion is that it prints in a single part and is hence…
Wydruk około 4,41 €–5,39 € nettoWstępna wycena jednego wariantu
Overview Easily replace or upgrade your old or broken light switch covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is my design of a Lightbar for the Prusa MK2* & MK3(s). Features: LED's directly powered by the printer Wiring running inside the mount Integrated filament guides for both spool sides On/Off switch Directly wired to the Einsy board…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of the model "Candy Skull Bowl" by Geoffro. It is a classic closed skull now. Single and multi-material versions included. Original model by Geoffro (HEX3D): https://www.thingiverse.com/thing:2595811 . Voronoi version added (3MF).…
Wydruk około 8,56 €–10,46 € nettoWstępna wycena jednego wariantu
Overview: Easily replace your old or broken outlet covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations for standard…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In the images, there are great results with tri-color filament and putting gold layers as the two layers on the outside section. The layers are explained in the table below. Reference the picture for the 180 twist for the middle layer. It…
Wydruk około 4,00 €–4,89 € nettoWstępna wycena jednego wariantu
Action figure of Josef Prusa
Wydruk około 5,18 €–6,33 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
Modification of 5-reel spool holder on Prusa Printer Enclosure v2 to just one reel, for users who want the V2 enclosure but don't have the MMU system installed. This is a modification of the spool holder in the V2 enclosure files…
Wydruk około 10,02 €–12,25 € nettoWstępna wycena jednego wariantu
Ho Ho Ho! 🎄 Imagine a Christmas tree made of not just two but three parts , each twisting into the other to create a double vortex illusion – yes, it’s twice the magic! The twisting motion makes this tree look absolutely mesmerizing and…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Christmas tree ornament. 8 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 100 g).
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
A simple multi-piece print-in-place heart that rotates within itself. Two versions included, one with an embossed name, and a blank file too. Print instructions Highly recommended to print this with a raft as any elephants foot on the…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ho Ho Ho! 🎄 Imagine a Christmas tree made of two parts that twist into each other – yep, you twist it into place. This creates an impressive vortex illusion , making the tree look almost magical. Caution: The illusion is so captivating,…
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
BACKGROUND: After designing a super simple iambic paddle for portable ops , I had multiple requests for a single lever version. So, here it is. I added a small snap-on cover to the design, but it's not entirely necessary. The hole in the…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended printing settings (or download gcode): Infill: 80%+ Brim = enabled Supports = Everywhere Orientation: see image This 3D-printed sawtooth frame hook is designed to provide a secure and stylish way to hang your artwork using…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
I got tired of reaching down to the floor to find my cable everytime i wanted to charge my phone in bed, so i made a cable clip so that it's always attached to my nightstand. Been using it for one month before this upload with no…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Use M3x30mm screws instead of M3x20mm screws when fastening the anti-slip dampers. Insert the M3 nut into the foot. Screw four printed feet onto the protruding threads from the bottom of the enclosure, and affix anti-vibration pads. The…
Wydruk około 0,72 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do you need a small spoon for a trip? Something you can throw away? This is the thing for you. A one-time use spoon to be thrown away. Perfect if you forgot to pick up some single-use spoons for a trip and needs something to pick up the…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Changing colors between layers is a known and easy to use feature in Prusaslicer. If you want to change filament within one layer you usually need the MMU. But with virtual extruders and some prearrangements in the model and slicer, this…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
V2 is updated to include 10Lb and 5Lb weights, a chamfered edge to make it easier to tell edge to edge plates apart, improved fit tolerances, and a bar with integrated gripping hands. Per izkariot_438646 's suggestion, I've also added a…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu
Tips are appreciated and go towards creating new designs Every crafter who is working with single edge safety razor blades knows that they're great for cutting a variety of different materials but sometimes a bit uncomfortable to hold.…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Only need to carry a single dose of a couple of tablets around with you? don't want to carry the box? I gotcha! Print instructions In the same way I vasemoded my stacking pill holders, I thought I'd do something similar to my pill-shaped…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Just for fun, I modelise something I show long time ago on Pinterest with specific dimensions adapted for PRUSA Mini printer. Easy to print, no MMU required. The STL is normally in enough quality to can scale it bigger if you want. If you…
Wydruk około 3,46 €–4,23 € nettoWstępna wycena jednego wariantu
The STL file is very small, you can size it for any printer. I have already added the filament changes to the 3mf file for the MK3s+, but if you resize it you will need to change the height of the filament changes.
Wydruk około 5,69 €–6,96 € nettoWstępna wycena jednego wariantu
Single kitchen utensil rest. Material: PLA, PET-G, ABS etc, Layer high: 0,2 or lower Supports needed
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
Summary This model combines the 4 STL files of the lid from the original model into a Single model that is ready for printing with no gluing necessary. These were combined using Tinkercad. Combined STL files: trashcan_top_handle.stl…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
Size: 82mm x 52mm x 41mm Filaments: PLA Mystic Brown (brown) and PLA Vanila White (white) Note: All parts need to be glued.
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
Had trouble finding a model for a single walled hexagonal tube that I wanted to use to creature some shrimp hides, so threw one together in 5 minutes, hopefully this will save someone else 5 minutes. Model measures: X - 41mm Y - 36mm Z -…
Wydruk około 2,37 €–2,90 € nettoWstępna wycena jednego wariantu
A simple to print dual color On Air warning sign. Just swap the filament color and have a dual color print. The combination of colours is yours to choose. The base is printed in a single colour, black, has 4 holes on the back for easy…
Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu
This tape dispenser is designed for a maximum width of tape rolls of 20mm. The inner diameter of the roll should ideally be about 26mm to keep the roll from coming off on its own and to still allow for easy installation of the tape roll…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
This two Ozito battery holders are a result of printing the original file only to find that the double holder does not accommodate two 18V PXC batteries side by side. I printed the original make on my Voxelab Aquilia X2 with the model…
Wydruk około 3,03 €–3,70 € nettoWstępna wycena jednego wariantu
Manual multimaterial project specially fine tuned for MK4 and MK4 only. Before finding the proper settings, I experienced bubbling, over extrusion and jammed filament. I am now having a clean wipe tower and nice multi-colour parts. You…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Filament change at 2,2mm 3,2mm 4,2mm Start with black 2,2mm change to yellow 3,2mm change to white 4,2mm change to red You can of course slice it also for other printer models
Wydruk około 4,78 €–5,84 € nettoWstępna wycena jednego wariantu
Created this quick fix for the drying rack. This model is designed for these measurements: rod insert diameter: 2.5mm bar clamp diameter: 14.4mm If needed, I can upload other sizes and create a proper parameterized design file.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Be sure to print with color change to get multiple colors. Also if you want to modify the OpenSCAD file for lucky the leprechaun be sure to get the PNG from the photos section. (Posted to reddit as /u/NoveltyAccountHater ).
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Creating wings in FreeCad and PrusaSlicer, optimized for single perimeter printing. I made some video tutorials, how I create my RC-airplane wings. I do the CAD-part in FreeCad, a free, opensource CAD software. The gluing surfaces are…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
Remix of Osfald's model to adjust it for a slightly different shape of 12mm square contacts. See photo. The model is otherwise unchanged, and it fits and holds a single AA battery very nicely. The contacts slide through the bottom of the…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
These are the all the parts I use to lighten the printhead of the FFCP, improve cooling and cable management for single extruder use. Needed hardware: 6 x short M3 heatset insert (CNC Kitchen) Optional: 2nd cooling fan + 2 x M3 heatset…
Wydruk około 5,96 €–7,28 € nettoWstępna wycena jednego wariantu
Overview Inspired by the "dual color, one-extruder" contest, I designed this model in Fusion 360 with a fun passthrough mounting. You can use this model as money box or pencil cup : as you want ! Printing Printed with 0,4 nozzle, 0,2 mm…
Wydruk około 7,35 €–8,98 € nettoWstępna wycena jednego wariantu
Video : Single-piece, printed U-channel for Phillips, Smart, RGB LED strips. Voice commands Compatible with Google Voice and Alexa ! I specifically used the Phillips WIZ LED strip system because it comes with a 12V power supply and a push…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
This caddy is a Derivative of: Remote Caddy by TheScarfNinja https://www.thingiverse.com/thing:3055108 Stephen has made a three-remote version here .
Wydruk około 5,04 €–6,16 € nettoWstępna wycena jednego wariantu
This stand can hold APX 6000's, APX 7000's, and APX 8000's. No supports or raft needed. Infill is 15%.
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
Toilet Pneumatic Flush Button Made to replace button on a Thomas Dudley Pushflo Petite Single Flush 46mm - 320185. Just pushes on, friction fit. Now revised as the thin part of the plunger can snap with the original version.
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
You have MMU2s, but want an easy way to do single color prints without worry about the buffer, filament winders, table-top spool holders, etc. Now, you can re-use stock Prusa MK3s spool holder with your MMU2s for single color prints. To…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
It makes your toothbrush really stable and catches all the water. I recommend printing it with 4 perimeters for rigidity. I printed mine in deep black to match my toothbrush. #Printables
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
Love Letter Favor Token — 3D-Printed Replacement (Single-Color) A clean, durable single-color replacement for the Love Letter favor/affection token. Prints fast, stacks neatly, and upgrades table presence without needing color swaps or…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Recommended print settings: Orange Prusament PETG (to match OPE…. or pick your own :) ) 0.4mm nozzle 0.2 mm layer height 15% Grid or Gyroid infill
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A phone holder for the Smart car specifically for the Huawei Mate 20 fitted with the official Silicone cover Print instructions Category: Automotive
Wydruk około 3,27 €–4,00 € nettoWstępna wycena jednego wariantu
Single-nozzle multicolor badge in the shape of Ukraine, for pins 0.5×35 mm. Made to show support for Ukraine and its people during war with Russia. This part is printable with only one extruder without MMU and G-CODE contains 3 colors of…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits ok- great to print in flame suppressing material
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
Bring Tony Stark to life with this highly detailed Iron Man model! This download includes two ready-to-print versions to suit your setup: Multicolor Version (MMU Ready): A pre-painted 3MF file configured for multi-material setups (Red,…
Wydruk około 4,81 €–5,88 € nettoWstępna wycena jednego wariantu
Toothbrush stand / holder for 1 Phillips Sonicare Recommended to print from PETG (doesn't hate water that much..) Used default slicer settings, no need to modify anything. It can lay flat, or you can add generic silicone feet (from any…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this print because I accidentally super glued a part of my hexagon wall wrong leading to a 1x1 gap. (Yes, I know you don't NEED to super glue them but at my scale it just makes the whole thing more structurally sound.) I'd…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This is First layer test for the Original Prusa XL Single Tool 360 X 360 X 0.2 MM Available for Gcodes for PLA & PETG
Wydruk około 1,93 €–2,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You may custom its size as you need.
Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu
Something I have wished was produced but have never found anything like it. I needed a way to neatly connect 25x16mm self adhesive trunking to a single UK pattress so I could relocate a light switch in my workshop without having to chase…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Christmas Card Reindeer (singe extruder print) Multicolor by layers: White (I use fluorescent white) Red Black Take an ornament for the Christmas tree from the postcard!
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Very basic two colour coaster. Print instructions Prusa Slicer default settings with a colour change at ~2.14mm.
Wydruk około 1,93 €–2,35 € nettoWstępna wycena jednego wariantu
3d model of a Kraft brand Macaroni microwave dinner bowl, and a 3d printable lid that snap fits to the bowl. Intended to support waste reuse.
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Ik vind het leuke spooltjes, hoe krijg ik die aan mijn Prusa i3 MK3S+ printer gehangen. Na redelijk wat tekenwerk paste het prefect. Om dat het zo klein is moet je wel heel voorzichtig zijn bij het plaatsen, de lipjes breken anders af. Er…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of the original Hex Stacker Crates by “Triple G Workshop”. This crate contains one divider and thus separates the crate into two equal sized sections.
Wydruk około 6,88 €–8,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My grandson liked playing with a springy prototype I gave him so I decided to make a spring toy fidget. For a simple print the raw shape from Fusion 360 has lots of springiness. I did another with “educational” features using my new MMU3.…
Wydruk około 4,38 €–5,35 € nettoWstępna wycena jednego wariantu
simple as possible single device stand for VEEV here you can use Onshape model to create your custom derivations…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print the top and bottom of the sign, then put them together to get a multicolor sign!
Wydruk około 2,55 €–3,11 € nettoWstępna wycena jednego wariantu
Munich coat of arms 3D model with colour/layer changes for single filament printers. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner locating pins are NOT printed.…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
The Multicoloured Christmas Bookmark is designed so that you can print it in two different colours with a single extruder printer. No supports needed I printed with 20% infill but shouldn't make a difference if you used less. I have…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nice and simple Spool Stand. Especially useful when weighing your filament spools, or sucurely parking them on your workspace. Adding some small rubber feet to the bottom prevents from sliding around. For using with bigger spools just…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu
The Interrupters - band 3D model for single filament multi-colour print. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner locating pins are NOT printed. They are…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
The Kubrics - 3D logo from The Heist album cover, multi-colour for single filament printing. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner locating pins are NOT…
Wydruk około 3,56 €–4,36 € nettoWstępna wycena jednego wariantu
Dimensions (LxWxH) 132 x 150 x 32mm (100% scale) Basic information The design was inspired by the Green Sea Turtle, which is undoubtedly one of the most iconic sea animals. The model is is split into 6 movable parts: a shell, which serves…
Źródło oznaczyło ten model jako treść 18+.
Version 3.0 of the 7-Segment mechanical counter. Improved design. This particular model is a sequential counter (numbers 0 - 9) that receives a linear input to cycle the display. This version was designed and prototyped using the Bambu…
Designed to be compatible with Cherry MX style key switches. Just add one of those, a key cap, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The only overhangs are inside the hole where the…
Dimensions (LxWxH) 170 x 96 x 65mm (100% scale) Basic information After multiple requests, I've decided to revisit my previously uploaded Orca design, and articulate it. Unfortunately Mattes beat me to it, and has already uploaded an Orca…
This parametric box has been redesigned from the ground up to fix the long-standing issues users were having while taking into account a couple of personal goals for design considerations. Fully 3D-Printed, no hardware needed! Flush hinge…
Update 17/09/2023 Added “HSW Ez-V1 Round Object Holder - 65mm Left” Update 29/04/2023 Added “Ez-V1” and “Ez-V2" hooks (14 files) which supersedes all other versions. These have been completely remodeled for improved strength, easier bed…
This is the first design I made in my single extruder - dual color series. My final design is out right now and takes this principle to a whole new level: Single Extruder - TRIPLE Color - Sleepy Cat ! And now back to the cow This is a…
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The STL and AMF files are available for download on…
Update 18/09/2023 Added “HSW Single Wall 11x2 SD” & “HSW Single Wall 11x3 SD” Update 30/04/2023 "HSW Single Wall - 11x7 HD" added “HSW Test Wall HD” added All files renamed ---------------- My new Honeycomb Coffee Wall just needs one…
This model is the old version. The new model with improved printability and enhanced accuracy is here! https://makerworld.com/en/models/570404 If you wish to sell prints from Manabun Lab, please refer to this.…
Thanx to the fantastic work by DeSteiner (as well as his help in making the custom text), I was inspired to make a few custom parts for his prop revolver. All parts have been test printed, and will have the same fit as the original parts…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
![Multi-Layer Rotating Rings [Single Extruder, No MMU]](https://media.printables.com/media/prints/1116868/images/8436648_57e3eb31-5416-4c62-96d5-8f7b6a244d45_fbec544c-3120-415d-a502-4816ae87c15d/rotatingmulticolorrings.png)
