773 modeli
This amazing automatic M3 bolt sorter is designed for the specific bolts you can see in the picture. I don't know how it works with other M3 bolts, but feel free to try. :) Be aware that if you use m3Sorter_bottom_gridfinity.stl you also…
Wydruk około 5,32 €–6,50 € nettoWstępna wycena jednego wariantu
A coin sorter for US coins - Quarter, Nickle, Dime, Penny. Just add coins, and shake to sort.
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
Decided to add the 3MF for the popular robot hand model by Make-a-print to make printing easier in different colours. Files have been separated according to the original design colours. Two folders of files are available, one for the full…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…
Wydruk około 16,63 €–20,33 € nettoWstępna wycena jednego wariantu
Place the containers on the tray in ascending order from 1-7. Put the small change into the top tray. The cents embossed on the bottom fall through the sieve. After inserting the small change, shake a little. Then the tower can be…
Wydruk około 1,49 €–1,82 € nettoWstępna wycena jednego wariantu
U.S. coin sorter. Roll the ring around clockwise and coins will fall in their respective coin tubes. Tube lengths sized for roll amounts, Penny, Nickel, Dime and Quarter (50 cents, 5 dollars, 2 dollars and 10 dollars). I added a nut to…
Wydruk około 8,69 €–10,62 € nettoWstępna wycena jednego wariantu
NOTE: This print was designed for and tested with 3mm thick acrylic panels. If you are purchasing a panel set from Printed Solid, be aware that they have changed their material thickness to 1/8" (3.175mm). I have generated new model and…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
I was looking for a locking mechanism to keep the IKEA SORTERA lid in place. I found TurboJonte design but then I realised it was for the front part of the lid, I wanted something for the back part. Note: The front has a different angle…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Ever need to find a specific screw from your screw drawer? Or find that one specific lego from your bag of legos? This tray is made for situations just like that! Just dump the pieces you need to sort into this large tray so you can see…
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
A good-looking modular frame. All parts are printable on a 180x180mm bed. If you print just the corner pieces and four joint pegs, you'll get a nice frame for a 4" square picture. To increase the length of any side, add side extensions of…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
This is my home-made coin sorter! This sorts all of your pennies, nickels, dimes, and quarters so you can finally make use of that coin filled jar you have ;). It is for US currency only (unless your currency has the exact same sizing).…
Wydruk około 11,11 €–13,58 € nettoWstępna wycena jednego wariantu
Made this in light of the original reason this system was created. to get rid of the cheap crappy containers you get your screws in! Paired with the screw sorter from the link below, you're bound to enjoy using this system….. even if you…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena jednego wariantu
Baby shape sorter with five basic types. It develops the child's cognitive skills and at least temporarily entertains inquisitive children :D Easy to print Printing Material: PLA or PETG Layer: 0.2mm Infill: 15%
Wydruk około 7,53 €–9,20 € nettoWstępna wycena jednego wariantu
Remix of https://www.thingiverse.com/thing:4759877 , what is a remix of https://www.thingiverse.com/thing:4695864 Just needed the smaller ones, so i edited it. NEW! ---- ---- ---- Made a new version as remix for printing in under 1h:…
Wydruk około 3,16 €–3,87 € nettoWstępna wycena jednego wariantu
VERSION 2 NOW AVAILABLE! A fun print that sorts your AA and AAA batteries. Drop them in the funnel and watch them enter their proper slots based on length! Two internal ramps allow AA batteries to roll over into the far slot, while AAA…
Wydruk około 6,24 €–7,63 € nettoWstępna wycena jednego wariantu
Make organizing your Pokémon card collection easier than ever with this 3D-printed Pokémon Card Sorter ! Designed to help you quickly separate Holo, Rare, Reverse Holo, Promo, and more , this tool is perfect for sorting large amounts of…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
I had a lot of unorganized screws, one time I've stumbled upon this type of sorter. I couln't find it anywhere(17.05), so I've modeled my own. I highly recomend printing it on smooth plate!
Wydruk około 2,26 €–2,77 € nettoWstępna wycena jednego wariantu
I designed this mail sorter to keep incoming mail organized. Here are some ideas on how you can use each slot of this versatile organizer: One per mail recipient Coupons & catalogs Junk mail or read mail to be shredded Outgoing mail Mail…
Wydruk około 14,25 €–17,41 € nettoWstępna wycena jednego wariantu
Info on the bolt sorter, and links to other screens, can be found here. A 'screen' for M3 button head and socket head fasteners. Each screen prints in about an hour on my settings, with no supports, brims, etc. needed. I printed mine from…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed from PLA, nozzle: 0,4 and layer 0,2. Print files for PLA , 0.4 nozzle and 0.3mm layer supplied. The only thing that will print from the brim on the backing is the drawer divider with the label. The other parts will be printed…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
Praktische Box für den Kräuterschrank in der Küche um übersichtlich und platzsparend Salatmischungstüten (Knorr oder andere) aufzubewahren. Das Modell kann stehend ohne Supports gedruckt werden. Die herausstehenden Buchstaben können bei…
Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu
📦 Prusa Tool Box Inserts – Secure Sorter 🧰 Keep your Prusa accessories organized and secure! These two custom inserts are made for the Prusa Tool Box V2 , compatible with MK4S, MK4, XL, MK3.9, MK3.5, MK3, Mini+, and Mini printers. They…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena jednego wariantu
Kenwood Kitchen Machine Cutting Discs Sorter Recommend the print orientation as in the picture and support only for the round cutouts as in the gcode-file. Printed with a 0,6 mm nozzel and 0,4 mm layer height, Prusament PLA Vanilla White.
Wydruk około 20,16 €–24,64 € nettoWstępna wycena jednego wariantu
Blocks can be placed in the corresponding holes in the lid. If you work in Quality Assurance, you will notice that all the shapes can also be placed in the square hole, as shown in this video that inspired the design:
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
A automatic battery sorter, no supports, just add battery! Updated it so it fits more batteries.
Wydruk około 6,41 €–7,84 € nettoWstępna wycena jednego wariantu
The basic version of the box has 3x3 sockets. The box can be freely enlarged by connecting additional sections. The individual boxes can be connected with a screw and M3 nut. Additional boxes can be connected from the top, bottom and both…
Wydruk około 6,73 €–8,22 € nettoWstępna wycena jednego wariantu
The sorter allows convenient storage and sorting of small items. The individual tiers can be stacked and the upper part of the sorter can be closed with a lid. Updated. Added a lid with holes, for mounting the top handle.
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
A tube adapter for the Sony FX500 Cell sorter. Should also fit the MA900 and SH800. Made when some of the adapters when some of them when missing. Printed on standard PLA settings for the MK3s+ printer, no supports. Print each part on the…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Dies sind Schilder mit Nummern für Tomaten, Paprika und Pfefferoni , sodass man die Sorte auseinander kennen kann. Wir stecken sie im Glashaus zur jeweiligen Pflanzensorte. In der fertigen Datei ist bereits ein Farbwechsel integriert. Es…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Improved Auto Coin Sorter - Coin Roll + Classic Version New in latest version 7.528: AUD - Australian Dollar update only. 50 cent coin dimensions increased to match the circumradius of the 12-sided coin. Should sort and stack just fine…
Newest Edit: 6-10-2024 New version follows the same concept as before but now the lid closes completely in both stacked and unstacked positions. Plus rounded edges for the little ones. Includes faster print time (albeit still takes a fair…
Holds 10 wrenches. Designed for a 20 Piece wrench set. Should fit just about any wrench. Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license.…
Improved Auto Coin Sorter - Coin Roll + Classic Version New in latest version 7.527: Improved geometry to increase reliability and accuracy of the sorting. Improvements: Sorts into removable coin tubes to facilitate both general operation…
This mini metric bolt sorter is designed to sit on top of a drawer of Gridfinity bins. It has slots for measuring M2 to M6 diameter threads from 2mm to 42mm long. The lettering on top is 0.4 mm tall so it is designed to be printed with…
Welcome wastelander to my humble collection of Fallout vehicles! All of these models are scaled to approximately 1:50 (28mm) for skirmish games; they should fit well AS IS for Fallout Wasteland Warfare, or adjust them as you see fit.…
Here are some weapons shrunken down to fit the 13 series H&K G11 FMG Scar-H Kriss Vector SSG-552 Thompson (Tommy gun) Keltec KSG bullpup shotgun Mateba semi auto revolver BFR scoped revolver SITES Spectre M4
An assortment of badges I hand drew in Procreate/Inkscape/Fusion 360 to practice line work and because I didn't see any already on Printables. The Hellcat, Demon, and Hellephant are about 1:1 scale with the real-world fender badges. The…
Improved Auto Coin Sorter - Coin Roll + Classic Version New in latest version 7.527: Improved geometry to increase reliability and accuracy of the sorting. Improvements: Sorts into removable coin tubes to facilitate both general operation…
Warning the text and the body are separate parts within the 3mf to help with coloring.
UPDATE: I made a completely overhauled, updated design that fixes most of the flaws! Find it here! This battery holder fits a large number of batteries and allows you to automatically sort AA and AAA batteries. For me this was key, since…
*** UPDATED JUNE 2024 *** Version 2 (squared) is available and is being maintained here. https://makerworld.com/fr/models/374953#profileId-398255 *** UPDATED - March 2024: Japanese and UK version added as suggested in comments/chats. ***…
Hex nut sorter V2 Now including a fully customizable parameterized .scad! Let me know if there is a size you'd like added. No supports needed. Enjoy! What is it? A device for easily sorting all those hex nuts your kids dump all over your…
Edit: We've update the original to now include a revised mini version including: * Better stacking so the lid fits when both stacked and collapsed * Less printing time * Rounded Edges Get the new version here >>…
This is yet another version of a coin sorter for Euro coins. There are coin stacks for the five higher value coins 2€, 1€, 50c, 20c and 10c. In each stack coins are stacked together in groups of five to facilitate counting the value of…
I dropped one of my screw boxes and had to return this mess of screws and dog hair back into something usable. Measuring each single screw turned out to be a time comsuming pain. So this idea of a credit card sized tool turned up. You can…
STOP - BEFORE YOU PRINT THIS MODEL - CHECK OUT OUR NEW AND IMPROVED DESIGN HERE: https://www.printables.com/model/327900-stackable-lego-brick-sorter-sorting-box We store a lot of our LEGO bricks in two types of Ikea Containers, the Sanla…
Cable hanger to hang and sort different cables like USB C, HDMI, etc. Printed with Prusament PETG no support used
This battery holder fits a large number of batteries and allows you to automatically sort your AA and AAA batteries. For me this was key, since my drawers always contain a whole mess of random batteries. Well, no more! The tolerances are…
AAA & AA battery sorter / dispenser This battery dispenser automatically sorts AA and AAA batteries Single piece. assembly work is not necessary Easy to print. It does not require support structure Video Sorting mechanism On the slide…
3D printable GoPro compatible mounting accessories for cameras, phones, and more. Original Solidworks CAD files are included for modification. All parts should be printed with 1.4mm or thicker perimeters. All mounts are designed to be…
It works with the same concept as the remix one so for functionality I strongly encourage you to check out the original, because I didn't print the result. I reccommend printing the top parts with the lettering upside down for better…
These trays will display your sorter boxes in an angle on your IKEA SKADIS board. I made them a while ago for all the boxes I collected over time, containing screws and other assortments. There are two different sizes: “small”: 134mm x…
An assorted set of eighteen different bead styles of two different lengths each, resulting in 36 total designs in the collection. As designed all have an inside diameter of 6.5 mm (making them suitable for paracord or drawstrings), the…
This is a simple golf ball marker (24mm diameter, 2mm height and 10mm spike) with attached files (initial version) and links to additional newer updated versions (separate models that are 25mm diameter). Template - emboss with your own…
More info on the build can be found here A quick little sorter/organizer for BHCS and SHCS metric bolts. Just stack them up, from smallest to largest, pour in your assorted bin of M2, M3, M4, and M5 fasteners, pop on the lid, then give it…
An attractive little tri-section sorting tray with optional lid, perfect for keeping those little bits around your crafting area organized. As designed, the tray is around 12 cm in diameter and 4 cm tall, but you can certainly scale it as…
An organizer for money bills and coins, with variants for different currencies. Update 01-16-2024: New versions with integrated coin storage, for different currencies. This started when my son asked me to print a holder for dollar bills,…
This model takes the concept of a rolling screw sorter from LayerLux3D and expands upon it to be fully Gridfinity compatible. The sorter itself has a 4x1 Gridfinity base and can be used with standard bins. Simply put it on top of the bins…
i remixed the design of COIN SORTER 100% PRINTABLE. EURO by neoprenox so that it would be easier to print and assemble and use less filament. and also to make the cranking so it dont need gears. i added a ramp with a cover to keep coins…
M3 screw sorter for M3 screws from 8mm to 40mm. As much as I liked the idea of the actual featured model of the M3 sorter it was not working good enough for my bolts , because many sizes which I use were missing and the used angle did not…
Improved Auto Coin Sorter V7.5 - "Short" US Dollar Version This is just a version of the universal (customizable, all-currency) coin sorter, omitting the 1 Dollar and 50 Cent coins from the standard US coin sorter for a more compact size.…
This is a lego sorting tray I designed after not being able to find one that would fit and fill the print bed on my Ender 3 Pro. The largest box is nearly the complete XY build area for this model. The trays all fit inside each other in a…
You put your coins in the little slots, and then put the thing in your cars cup holder. Pretty simple. If you would like to customize the design, download the .F3D file and open in Autodesk Fusion 360. Category: 3D Printing
Trivial screw sorter - 15 sizes, metric. Background: My 7 year old wanted to help sort the catch-all tray of screws but the calipers proved slow and boring, so "we" designed this plain guide/sorter and it worked like a charm in practice.…
The original "Amazing Gridfinity M3 Bolt Sorter" top only accepts <3mm heads. This version accepts 4mm heads.
DESCRIPTION: This is a gravity fed screw sorter. This is meant for metric screws and sorts from M8 to M28 screws. It also has detaching trays for easy use. PRINT INSTRUCTIONS: Print with pretty much any nozzle. Layer Height: 0.2 Infill:…
Click here to see collection containing more gardening related designs by 3D Printing Bug. Enhance your plants with these stylish and functional 3D printable trellises ! Designed to support climbing plants and vines, these trellises add…
Multiboard bottle holders - assorted sizes, attach to the board with 2x 9mm small thread, flat head, t-bolts. 32.5mm 42.5mm 52.5mm 58.5mm 62mm 68mm 72.5mm If you need additional sizes please feel free to comment and I can add them.
Used to sort US coins in multiples of ten, so they can be then stored in rolls. Never again mess up the amount of coins in a roll! I printed mine at a 0.15 layer height with 10% infill but I'm sure you can get away with a bigger layer…
Tired of messy piles of bricks and endless searching for the right piece? 😵💫 Meet LEGO Sorter Box Pro , a smart, modular, and fully customizable 3D printable storage box designed to keep your LEGO bricks perfectly organized, protected,…
Versions Two models with 200mm and 150mm length of the back-panel of the organizer were uploaded as .stl together with the freecad-file. The exact parameters for the two variants are listed in the attached screenshots. It is possible to…
First, fill Coin Sorter Tray 1 with your coins. Next, cover Tray 1 with the Coin Sorter Lid. Give the Coin Sorter a good shake... and keep shaking! When you're done……. Tray 1 will have quarters. Tray 2 will hold nickels. Tray 3 will…
Hi Josh, Here is my collection of killzone weapons. As always still lots ta do on my projects list. But maybe there is something here worthy of your project. I'll upload Armour and helmets in due course. Do check the sizing suits your…
print in pla and glue or warm pla to put in place. might need some basement slight inclination to work perfectly depending on the quality of the print. best print placement see picture with exploded sections
Got tired of my wife's drink packet boxes banging around in the pantry -
This is a gridfinity 4x3 drill assorted bit holder - there is no specific slot for specific size, you just pile the drill bit in and sorta arrange them by size. There are spines at the bottom of box to keep the drill bit from rolling…
Here are a few different sized clips that work great for keeping rolls of wrapping paper from coming undone into a big torn mess. Category: Organization
Gridfinity Bolt Sorter modification for more Bolds (tested M4 M5 M6)
Coin sorter for czech crowns. Throw single coins into the input funnel and look for the result. Each coin falls down to the separate storage, depending on its value. Sorter recognises Czech crown coins 1CZK, 2CZK, 5CZK, 10CZK, 20CZK,…
Print both the letter sorter and the optional TPU foot pads in the orientation downloaded in. The pads are technically different so you'll need 2 of each, but 4 of the same would still functionally work.
This is a sorter set for the IKEA RÅSKOG rolling shelf. https://www.ikea.com/de/de/p/raskog-servierwagen-weiss-20382932/ The boxes have niches for the fingers to make it easier to pull them out. Alternatively the “s” version do not have…
A set of sorting trays designed to separate beads and ball bearings sized from 2mm to 6mm in size. Untested; print in PLA at 0.2mm with 20% infill. Post a make and give me feedback so I can make the model better! UPDATE: still untested,…
I wanted to store all items from the base game and expansion of Terra Mystica and Fire and Ice in one box. The existing solutions unfortunately didn't meet my expectations. I wanted all tiles grouped logically together to use them easily…
First of all, I hate sorting anything. I found using a sorter that has the lines was difficult for me to read through my bifocals. This sorter will take care of 95% of my needs with a max length of 30mm. I hope you find it useful.
Printed from PLA See image for print orientation (no supports needed) No glue or fasteners required (snaps in place) Drop the coin at the top of the ramp
automatic coin sorter for polish zloty!
I added a negative volume to the M3 sorter to allow for the larger M4 heads. Still seems to work well! YMMV…
I liked andy_burke's idea for a coin holder, but when I printed a test print some coins fit and some didn't. So I thought it would be easier to just redesign my own one from scratch in Fusion 360. I decided to add a lid so that you could…
better remixed version, no hangs or skips
First of all, thank you for downloading my model :D Dimensions: Gridfinity 4x1 (168x42mm) Coins (all): 1¢ 2¢ 5¢ 10¢ 20¢ 50¢ 1€ 2€ Attribution: Zack Freedman YT channel. Gridfinity video . Print settings: Speed: any (depends on printer)…
This is a replacement top for the M3 bolt sorter. It's a great design, but was missing a 14mm hole so would mean I kept having to double check the 16mm collector. In the absence of a step file, I've tried to keep this as true to the…
Original Model Summary 100% printable euro coin sorting machine. No screws, nuts or other parts not printed. You can use it to order coins or count the change in coins if you apply a scale. No jamming and good working speed.…
Modular pipette tip sorter for P10, P20-P200 and P1000 SARSTEDT tips. Tested tip boxes: P10: Axygen Biosphere Fisherbrand VWR P20-P200: Biosphere Fisherbrand SARSTEDT VWR P1000: Biosphere
Make your sorting of Perler beads easier than ever. The separator allows you to divide the tray into two compartments. Current orientation is the recommended one.
I accidentally deleted the other listing when I went to edit it >.< Arduino Code: https://app.arduino.cc/sketches/667b9aaf-c7f0-41d5-893e-bff4c8cc529d?view-mode=preview I thought this would be a fun project as the only other time IR…
An automatic coin sorter for many currencies. See also http://youtu.be/7F2fIF9PNBk for a short demo video.
This spoke nipple sorter tray is a quick way to align, pick up, and store spoke nipples for wheel building. The tray has tapered slots to quickly align nipples dumped in from a bulk container.
Requires the m3Sorter_bottom.stl from https://www.printables.com/model/874548-amazing-gridfinity-m3-bolt-sorter/files DO NOT USE THE GRIDFINITY BOTTOM - IT IS NOT COMPATIBLE Model image taken from a make - not mine
All credit for this design goes to @EricAnastas_578679 , I've only made minor modifications to an already-excellent model.
