9040 modeli
I saw some of the toothpaste tube squeezers and thought there's room to improve. So here's brief description of this ratchet toothpaste tube squeezer: ratchet mechanism ensures the tube doesn't unwind no supports just 4 parts which clicks…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Remix of a design by J-Max from https://www.thingiverse.com/thing:1306832 These are corner square clamps in 30 variations used for woodworking to hold two pieces 90 degrees square during a glue-up or pocket-hole join. Regular clamps of…
Wydruk około 8,67 €–10,60 € nettoWstępna wycena jednego wariantu
3D Printed Diffusion Panels Before printing watch The Next Layer video, Jonathan's setup is amazing and it explains what you can expect way better than I could in this description. At 8.25" (209mm) this is the largest printable diffusion…
Wydruk około 10,86 €–13,28 € nettoWstępna wycena jednego wariantu
Toothpaste Tube Squeezer made by "My 3d Prints" This is a remix of Toothpaste Tube Ratchet Squeezer by Jakub_Matula
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
Wydruk około 7,23 €–8,83 € nettoWstępna wycena jednego wariantu
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
⚠ PLEASE DOWNLOAD THE MANUAL AND READ IT BEFORE USE ⚠ Print Keep Squire is a beginner-friendly, front-loaded single-shot foam-dart blaster, designed for those eager to venture into the exciting world of 3D-printed blasters! Its my first…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An unranked, collapsible Goon mask from the Netflix series, Squid Game, created by Thingiverse user kimgooni - https://www.thingiverse.com/kimgooni/designs 3mf file is organised for a good print, and the gcode attached worked perfectly on…
Wydruk około 8,83 €–10,80 € nettoWstępna wycena jednego wariantu
[Update] ---2024/07/14--- Added ammonite parts. You can make your own Flexi Ammonite. This is a flexi squid, an improvement on the "Squid and Ammonite Set" that I published on Thingiverse and Printables. Flexi Squid & Ammonite Set by…
Wydruk około 3,34 €–4,08 € nettoWstępna wycena jednego wariantu
🇻🇦 ¡Benvenuti in Vaticano! Welcome to the Vatican! The world has a new Pope, Leo XIV, and on this occasion, MiniWorld3D is bringing a major landmark of Rome and the world to our library. This entry is a highly-detailed model of St Peter's…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
I recommend using balls with blue dot; they are the hardest. ACCESSORIES Prusa CoreOne/+/Gen2 You will need 4 M3x6MM screws to fix them to the lower frame; this one has 4 threaded holes in each of the 4 corners as standard. Prusa…
Wydruk około 8,13 €–9,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use this cap and a bit of 4mm PTFE tubing to turn any common PET pop bottle into a squeeze-to-squirt “lab bottle”. Prints without support in any rigid material. Either cut the washer out of an old inner tube, rubber sheet or print in…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
I wanted to speed up the print time and save some material so I made the hex holes bigger.
Wydruk około 6,47 €–7,91 € nettoWstępna wycena jednego wariantu
This is your basic speed square with metric markings on both sides. A speed square is essential for most wood working projects. It is also very useful for a lot of other projects. If your printer is properly calibrated the square will…
Wydruk około 6,57 €–8,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a huge STL. You can make it smaller by re-rendering the Openscad code with lower face numbers.
Wydruk około 7,51 €–9,18 € nettoWstępna wycena jednego wariantu
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
PETG print files for: 20x20x2 25x25x2 30x30x2 30x30x3 35x35x2 35x35x3 40x40x2 40x40x3 (millimeter sizes) There is also the FreeCAD file if you need a different size.
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This a basic speed square giving you a 45 and 90 degree angles. It is relatively accurate for most woodworking applications. It can be customized with the owners name if you like.
Wydruk około 6,48 €–7,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
What makes it special The square shape is what sold me on this one: flat sides, clean lines, and a twist that keeps moving in your hands. It is a cool fidget toy, fun to use, and a unique design to print in place. I recommend printing it…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
Dosen Insektenschutz - Can insect protection - Wasp protection - Can Protection - Dosenverschluss - insect screen - wasp
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…
Wydruk około 13,77 €–16,83 € nettoWstępna wycena jednego wariantu
45mm and 65mm 0.2mm thick square for calibrating your first layer, the presliced files are set to pause at 160c extruder temp to auto bed level. Updated for 0.4mm and 0.6mm Nozzle version Gcode files and 65mm size
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
I was impressed by the concept of RostaP 's storage wall. It is super versatile and it is extremly easy to design your own addons. However, I found the actural panel design a bit to unspectacular. So I came up with the idea to repeat the…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieser Halter ist für eine Motorsäge, Heckenschere oder auch andere Geräte gedacht die hängend gelagert werden. Für eine gute Haltbarkeit sollte die Füllung mindestens 80% betragen. Viel Spaß beim drucken. Bitte geben Sie mir noch ein…
Wydruk około 11,33 €–13,85 € nettoWstępna wycena jednego wariantu
This model combines a square and a clamp. It would be use to assemble cabinetry, shelves, large boxes, etc. The marks are in centimeters on one side and in inches on the other side. The inside is 140mm x 140mm, the outside is 175mm x 175…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Material: Prusament PLA Blend My Silverness Layerheight : 0.15mm (SPEED) Support: Not necessary
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
Print & acrylic draw
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Système de clips qui permet de fixer une visière sur une casquette standard. Pour la visière j'ai utilisé une feuille transparente percée avec une perforatrice de bureau standard (trous de 5 mm de diamètre). Le but est des pouvoir offrir…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a squishy fidjet toy made from 24 oval plates clamped together. If you're looking for a smaller one: https://www.printables.com/model/1176641-squish-fidget All necessary parts even fit on a prusa mini . For the assembly of the…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
I liked the idea behind this design , but it was too flimsy, even printed on PETG it kept breaking when dropped on the floor. This is designed for the Black Diamond “HotForge” carabiner from their quick-draws, but should fit any of the…
Wydruk około 2,62 €–3,21 € nettoWstępna wycena jednego wariantu
This square trick box has a hidden latch mechanism. This remix of the original Twist Lock Trick Box (hexagon) uses a square base and cap. Just like the original, this can be customized with different topper designs. Any topper created for…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
WSQK Van : Stranger Things. I did some crazy stuff to get this to work/fix. Let me know how it prints. Cheers. And there is no AI involved... Just blender... My tool chain has been reduced to just blender these days. Gone are the days of…
Wydruk około 14,10 €–17,24 € nettoWstępna wycena jednego wariantu
First off, attribution: This is a remix of the laser bed corner inserts by morpha on thingiverse. Found here: https://www.thingiverse.com/thing:4857543 During my testing, I figured out the true 0,0 of the Snapmaker A350 (at least mine) is…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Introducing the upgraded version of the self-watering planter design! This remix takes the original square design from Mikolas Zuza and improves upon it with fixes to the problematic outer and inner parts. With its self-watering feature,…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
small 3x4 spice rack for cupboard organization. Uses 4oz square spice jars https://www.amazon.ca/gp/product/B077T2252Y/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 Print instructions PLA works fine pirnt at .30mm for quicker print.…
Wydruk około 9,83 €–12,02 € nettoWstępna wycena jednego wariantu
A cookie cutter from the squid game series
Wydruk około 3,23 €–3,95 € nettoWstępna wycena jednego wariantu
This is a small jig to make square cuts using a japanese hand saw. After printing you can just pop the magnets into the holes. I used 8x3 mm neodym magnets like these: https://www.amazon.de/gp/product/B007KZGADE. They give great support…
Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu
This a parametric assembly square to be sure you assembling your parts square. You can define your length, depth and height as you want. I needed them to keep two surfaces square during the assembly using pocket-holes. I printed two of…
Wydruk około 4,17 €–5,10 € nettoWstępna wycena jednego wariantu
This trash can was made by using sine waves of varying frequencies to define the outside surface, giving it its rippled appearance. Slightly different sine waves were used on each side so that no two sides look the same. The ripples also…
Wydruk około 8,06 €–9,85 € nettoWstępna wycena jednego wariantu
Complete Yagi Antenna Clamps Collection — Universal, Dedicated & 6m Heavy-Duty (Boom 15 to 30 mm) A popular, highly versatile antenna clamp collection designed to fit multiple Yagi antenna configurations. Thank you to the ham radio…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
hi, i made this sqared wall piece and im planning to expand all the extensions and other cool stuff so if you have suggestions or any other comment make sure to let me know (just send me a message) tips are also very welcome
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
Bob's Birders This exists because one day I imagined Teddy from Bob's Burgers as a squirrel, sitting on his stool at the restaurant. We have a couple bird feeders around our yard, but they seem to taunt the crows, jays, and squirrels who…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Please like and follow and post your makes. Use care. This looks like a knife but there is no sharp edge. The tip can poke so not for small kids. Use in the home. I made this goofy KA-BAR knife toy, but I like practical prints. So I…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Simple SKADIS peg board holder for a combination square. Printed at 0.2mm layers, 20% infill, no supports.
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a pretty basic print of a soap saver based on the Wooden one available from Dr. Squatch. It helps to dry out your bar of soap and extend the life which is very noticeable. After using the soap saver I get 3-4 weeks out of a bar of…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
Yes, I know another one of these! Quick 4min calibration square.
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
gabarit d'angle pour laser, positionnable facilement grâce a des aimants.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
This is a thumb rest designed to fit on a Fender/Squier Jazz Bass or similar. It won't fit on a Precision due to the hole spacing being different. Since it uses the already existing pickguard screw holes no drilling is required. The…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
Fits 6 lids
Wydruk około 1,77 €–2,17 € nettoWstępna wycena jednego wariantu
You can change the color order, there are 2 types (one with 1 hole for the end of the keychain and another with 2 holes to use in the middle of the keychain) I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
I was delighted to find here the Torus Toy model by @lubosz We used to have a much smaller version many years ago and i decided to try and remix it and build a larger and more complicated version. The result is fantastic. It prints in…
Wydruk około 5,19 €–6,34 € nettoWstępna wycena jednego wariantu
The only Qnap key model on this site wasn't working for me. Dimensions were right, but my Qnap lock has a protrusion on the corner. Thus, I updated it to accommodate that protrusion. When printed using 0.4mm nozzle, the key looks like it…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 6,74 €–8,24 € nettoWstępna wycena jednego wariantu
These squashballfeets for the BambuLab A1 allows you to reduce the noise of your printer by dampening out vibrations. Print Settings Printer: Prusa MK4 Rafts: No Supports: Yes (The Dome for the Ball don't need Supports) Resolution: 0.15…
Wydruk około 3,78 €–4,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I am entering a small competition later this summer, I need to center a 8x10 photo onto a 12x14 board. Since I’ll be needing to do this repeated, I made this little jig to help. This catches the edge of the foamcore backing board and…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 7,23 €–8,83 € nettoWstępna wycena jednego wariantu
Hi there! This is my own take on a 3-model squad base for 32mm diameter base miniatures. I use these for my older style Blood Angels space marines for Warhammer 40k, but these would work for just about any game using minis on the same…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
Inspiration | I love the voronoi trays by @msmn and @olgapavlova_207132 but need a little bit different size and compartment count so I designed my own. Handy for small equipment repair to keep little screws and such in order. Features |…
Wydruk około 4,30 €–5,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 6,72 €–8,21 € nettoWstępna wycena jednego wariantu
This is a speed square I designed. It has measurement increments of ¼" with numbers every inch. It also has angle measurements every 15 degreed and labeled on one side. Edit: Model can be printed vertically for better clarity on numbers…
Wydruk około 5,27 €–6,44 € nettoWstępna wycena jednego wariantu
A connector to make a square equilateral pyramid out of straws. Uses the white part of the straw from boxed milk.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 7,11 €–8,69 € nettoWstępna wycena jednego wariantu
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 5,57 €–6,81 € nettoWstępna wycena jednego wariantu
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 7,50 €–9,17 € nettoWstępna wycena jednego wariantu
A square-based pyramid where all of the edges are the same length.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Square Sorting Tray v3 & v4 (Vase Mode) This Sorting Tray uses a minimal amount of material and can be reduced in scale if desired. It was inspired by one of my pervious models “ Paperclip Container & Cover ”, “ Octagon Sorting Tray (Vase…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
After running into this pegboard system: https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system/files I had to create some new variations in cad to hold some of my woodworking tools. So I decided to make a holder for…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi there! This is probably the silliest thing that I've ever printed. I previously made squad bases for 25mm & 32mm diameter minis, but thought that it would be neat to see if a 3x 100mm squad base could fit on my MK3+ print plate. It…
Wydruk około 2,97 €–3,63 € nettoWstępna wycena jednego wariantu
A simple design in FreeCad-19. If you are a novice to FreeCad, load the file and take it apart to see how it is constructed. If an expert, you already know. The print file is for a MK3S in PETG. Let the print cool completely before…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 5,75 €–7,03 € nettoWstępna wycena jednego wariantu
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 7,70 €–9,41 € nettoWstępna wycena jednego wariantu
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 6,36 €–7,78 € nettoWstępna wycena jednego wariantu
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 6,01 €–7,35 € nettoWstępna wycena jednego wariantu
I'm a huge fan of this design. It really does quiet down the Mini, quite significantly. However, I was having issues with the back foot coming off every time the printer was moved. I.e. removing the print bed, inserting the memory stick,…
Wydruk około 2,28 €–2,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein Werkzeug welches ich Täglich in meinem Unternehmen verwende. Z-Höhe sollte 7mm betragen, um ordentliche schnitte setzen zu können. A tool that I use daily in my company. Z-height should be 7mm to be able to make proper cuts.
Wydruk około 4,47 €–5,47 € nettoWstępna wycena jednego wariantu
The fit with the blade into the squeegee body is crucial. It must be snug. If it's not, adjust the tolerance parameters in Fusion 360, bend the body with hot water, use super glue, or, write to me in the comments :) F3D and STEP files…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
A useful little helper for woodworking
Wydruk około 22,16 €–27,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 5,76 €–7,04 € nettoWstępna wycena jednego wariantu
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 6,88 €–8,41 € nettoWstępna wycena jednego wariantu
Off-Duty in the Outer Rim Collection: Vaders “Sith Squash and Vine” a Gourd Hobby Farm. The getaway from Mustifar is a remote swamp island on Felucia. Vader grows his crafts gourds here and is well known for the quality of birdhouse gourds.
Wydruk około 10,78 €–13,17 € nettoWstępna wycena jednego wariantu
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 6,80 €–8,31 € nettoWstępna wycena jednego wariantu
This is a simple stand for up to two Tamiya square bottles like the extra thin cement or panel liner. After spilling my bottle twice and ruining the pretty grid on my cutting mat, I designed this. 😅
Wydruk około 1,99 €–2,44 € nettoWstępna wycena jednego wariantu
This protective cover for set squares offers reliable protection against scratches and breakage. It ensures that your set square remains in excellent condition. Ideal for school or office, the cover shields your set square from everyday…
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
Checklist Stencil Circle & Square
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This cap is to cover the end of a square pipe
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 5,12 €–6,25 € nettoWstępna wycena jednego wariantu
Bonsai display table 09 square 150x150x37mm, support is necessary. Feel free to scale up or down until you like the result and it suits your tree.
Wydruk około 16,21 €–19,82 € nettoWstępna wycena jednego wariantu
Volvano mosquito repeller, special to spend summer afternoons in the garden without mosquitos. The base was redesigned to have a bolt to pin the mosquito repeller. The volvano was rescaled to fit the spiral in the interior. Printed in…
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
A Sator Square using the font carved into a wall in the medieval fortress town of Oppède-le-Vieux, France.
Wydruk około 7,18 €–8,77 € nettoWstępna wycena jednego wariantu
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 7,57 €–9,25 € nettoWstępna wycena jednego wariantu
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 5,68 €–6,94 € nettoWstępna wycena jednego wariantu
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 6,11 €–7,46 € nettoWstępna wycena jednego wariantu
Box Note 77mm Circle & Square post it note sticky notes cube 76x76mm
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 6,17 €–7,55 € nettoWstępna wycena jednego wariantu
My young daughter loves to play a game called Shelby's Snack Shack . It is an awesome game for kids to help them learn basic math skills. I thought the concept was great so I adapted it to be an easily printable game for families to play…
Wydruk około 0,03 €–0,04 € nettoWstępna wycena jednego wariantu
WHY?! I do a fair bit of massively complex functional prototyping. I used to have to draw a 3.10mm hole to fit a 2.90mm screw if I wanted my 14mm square hole to be 14.00mm. Now, I draw 2.90mm and get 2.85-2.95mm, and get my +/- 0.05mm…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
