49 modeli
This is delicate. There's no way to design a top that spins well and can survive rough play when printed in PLA. The stem will break in seconds. See “Playing with Your Top" below. Note: My PrusaSlicer project file and GCODE both use GCODE…
Wydruk około 2,94 €–3,60 € nettoWstępna wycena jednego wariantu
This is the last in my series of Swoop 14 ornaments. I've provided the topper as both one piece and two. It's too large to print on my printer in one piece, so I created two interlocking pieces to make gluing it easier. There's about a…
Wydruk około 4,11 €–5,02 € nettoWstępna wycena jednego wariantu
Redid my angled foregrip for M3x25 screws and hex nuts. Hangs on to the rail much, much better now. There are long and short versions here.
Don't forget to like and post your makes, also check out my other egg models! https://www.printables.com/model/734705-beautiful-easter-egg-7-pack-screw-bottom-for-fun-s 0.2mm Layer Height 2 Perimeters 10% Infill 5 top and bottom Brim My…
Meet Daky, your prehistoric pal with wings full of charm! This tiny pterodactyl may not fly, but it’ll definitely soar to the top of your favorites list. Perfect for quick prints, gifts, or that colorful army of dinos you’ve always…
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed…
While I've created over 20 “swoop” designs, I'll only be publishing a few. This is the first. The openings in the ornament really catch the light. This ornament looks great in any color – solid, rainbow, multi-color, transparent, or…
This is a furniture kit for Cynthia by Sillybutts. It includes a birdshead grip, thumbhole stock filler, curvy mag chin piece, curvier mag release, and a trigger guard with a spur, as well as a foregrip. Additionally, an extended top rail…
Hey everyone! Today I bring you a nice little display shelf. It prints fairly fast and easy. It has a clearance of about 70mm between shelves but if the things you are putting on it are small it can still fit a lot, giving you more room…
I printed the upright and the top separately. The top I printed with a brim at .12, and the upright at .2 with a brim. I assembled them with a little superglue in the top, although it probably doesnt need it. There are two heights to the…
A remix of @shoelesshistorian's updated Swoopy Picatinny AFG, with closer bolt spacing so that it works with rails with only 3 or 4 grooves. Specifically based on the stubby/small version of the original.
NO SUPPORTS! LOW LAYER HEIGHT RECOMMENDED Modeled from scratch Prime and paint, I covered mine in a clear epoxy finish. This model is based on a figure I found in my house, not my original design.
Stand for SS86 Swoop for some shelves that I made out of 20mm thick project board. Added a free standing stand.
A full set of inch and metric thumbscrews designed to press onto a socket head cap screw. Includes inch sizes #4, #5, #6, #8, #10, ¼, ½, 5/16, and 3/8 and metric sizes M3, M4, M5, M6, M8, M10, and M12. All have been tested with stainless…
The stem is delicate. To survive rough play, I strongly recommend you use rugged filament. Read “Playing with Your Top” to learn how to get the best spin without breaking the top. I have included my PrusaSlicer project file (3MF) and…
Adds a palm grip (I like TPU) to Shoelesshistorian's Swoopy Picatinny Angled Foregrip . I used the updated m3, full sized version, but it may work with others. This remix includes: Voronoi textured grip insert, textured using…
Just a stand for an iPad, originally designed for the iPad iPad (or as Apple calls it iPad 10.2" 2019) Print instructions Print it laying on the side, I did mine at 10% infill I think. Maybe you can go lower
This ornament looks great in any color – solid, rainbow, multi-color, transparent, or glow-in-the-dark. Both halves of the ornament print “right side up” so you can print with two or three color filaments and get the colors to line up…
An experiment in trying to easily use 3D sketches based off of simple revolves in Solidworks. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 10% Filament: CC3D PLA Silk Antique…
This is the ornament that started it all this year! The first in the Swoop series. There are 2 other ornaments in the Swoop 1 series – a finial and a “stretch” ornament. I'll be publishing a new ornament every day this season! Follow me…
I know there's a million scoops and spoon type things here, but a lot of them seemed to not be designed to be easy to print. Holds about 20mls
This is the first in a series of four Swoop 14 Christmas ornaments. I'll be publishing a new ornament every day! (OK, almost every day. Everybody gets a day off once in a while.) Follow me to stay up to date! I've provided my PrusaSlicer…
If you have the Gigapower Swoop, then you probably know what this is for. I printed it in PETG with the thin “washer” like section removed so that it prints flat on the bed, and it works great. I left the model as-is in case you want to…
This ornament looks great in any color – solid, rainbow, multi-color, transparent, or glow-in-the-dark. I've designs a custom box to safely store all my 2024 Christmas Finial designs . I've provided my PrusaSlicer project files (3MF) and…
A Swoop. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
This is the second in a series of three Diamond Swoop Christmas ornaments. I originally printed my stretch ornaments in 2 pieces, but then took the time to design custom supports that allow it to be printed as just one piece. It's not…
Yet another Lynx 2.1 aesthetic remix. This one only accepts 40cm barrels (no barrel retention screws) and only has a Koda magwell (if you want talon, do it yourself). The shroud has a modeled support wall on what will be the bottom side…
This is the 60th Christmas ornament I've published this season, rounding out the year. Like it? Check out my profile for more. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the…
This model I designed as a medium sized plant pot for some succulents I have that needed a new home. I suggest printing with 100% infill and increasing your flow factor to make this water tight.
The openings in the ornament really catch the light. This ornament looks great in any color – solid, rainbow, multi-color, transparent, or glow-in-the-dark. This is the second in a series of four ornament designs. This season, I plan to…
This is the last in a series of three Diamond Swoop Christmas ornaments. I've designs a custom box to safely store all my 2024 Christmas Finial designs . I've provided the finial as both one piece and two. It's too large to print on my…
Meet my Emo Baby Dragon , a super detailed chibi-style dragon with swoopy bangs, curled horns, and textured scales. This little dude has a dramatic expression, small wings, and sits on a sculpted stone base. This is my personal print of…
This is the ornament series that started it all this year! The first in the Swoop series. There one more ornaments in the Swoop 1 series to be published – a finial. I'll be publishing a new ornament just about every day this season!…
This is the first in a series of three Diamond Swoop Christmas ornaments. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! If you want to print…
This model I designed as a large sized plant pot to go with the pot I made for some succulents I had that needed a new home. I suggest printing with 100% infill and increasing your flow factor to make this water tight.
Here's an elegant, fun print for the tree. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! I've designs a custom box to safely store all my…
This is the second in a series of four Swoop 14 ornament designs. I'll be publishing a new ornament every day! (OK, almost every day. Everybody gets a day off once in a while.) Follow me to stay up to date! I originally printed my stretch…
retains on rail better, maybe
Update! There's a beautiful detailed remix by lechuckgl here: https://www.thingiverse.com/thing:3753434 Volcanicus is awesome, but one of the downsides to this massive robot made from smaller robot dinosaurs, is that Swoop's legs can…
Here's an elegant, fun print for the tree. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! I've designs a custom box to safely store all my…
Everything should slot in together but I used glue just for piece of mind. Print the handle guard down and basic supports work GREAT for the slots. Have fun swinging it around and making sword fighty noises :)
This is my take on Swoop from Transformers. You might need to resize this model to suit your needs.
Not tested but it should work!
This is delicate. There's no way to design a top that spins well and can survive rough play when printed in PLA. The stem will break in seconds. See “Playing with Your Top" below. Note: My PrusaSlicer project file and GCODE both use GCODE…
Wydruk około 2,94 €–3,60 € nettoWstępna wycena jednego wariantu
This is the ornament that started it all this year! The first in the Swoop series. There are 2 other ornaments in the Swoop 1 series – a finial and a “stretch” ornament. I'll be publishing a new ornament every day this season! Follow me…
A remix of @shoelesshistorian's updated Swoopy Picatinny AFG, with closer bolt spacing so that it works with rails with only 3 or 4 grooves. Specifically based on the stubby/small version of the original.
This is my take on Swoop from Transformers. You might need to resize this model to suit your needs.
With the final member of the SS86 dinobots upon us, we figured that a custom flight stand would be the best way to get him displayed in his alt mode in flight! Sporting a base inspired by the dinobot's logo, this stand is beefy enough to…
This set of lightweight horns that fit close to the head could be the perfect addition to your project, be it for your tiefling, qunari, demon, devil, monster, faun, or fey costume, for decoration, or as part of a prop! These are raw 3D…
