1026 modeli
A quick remix in tinkercad to add a loop so I can have this on my keys. ive printed in resin and FDM and both came out great. I did make the top infill quite high for strength
Any feedback would be greatly appreciated . Last minute Easter Decor Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed Scale it as you like :)
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Knob Trooper helmet, Star Wars inspired simple Knob Drill a hole for screw mounting If you liked this model, a coffee is always welcome ☕🙂 buymeacoffee.com/goodbuyerclub
You can scale it for you and your cookies' needs :) This model is a remix of the original which was made by tomaslopez over at Thingiverse. https://www.thingiverse.com/thing:3578014
Any feedback would be greatly appreciated . Remixed from https://www.thingiverse.com/thing:3008571 Nozzle: 0.4mm Layer: 0.2 (Recommended) Supports needed Scale it as you like :)
Another stolen shisha mouth tip from thingiverse.com.
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Optimized for those with 1 AMS or who want to use less colors Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Charcoal Black…
Abstraktní obraz Stormtroppera na zeď. 3mf je nastaven na dvě barvy filamentu. Kvalita 0.30mm. Author Luděk Sušický.
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Not really suitable to wear on your head, meant to be printed smaller as decoration on e.g. a shelf. - Aren't you a little short for a…
This is a full scale printable Stormtrooper Helmet opening sice at the bottom w:228 mm l:224 mm For the glasses i used acrylic glass. I added the form and the addons for mounting to the files. For the Hovi Mic i used this thing. Since…
A few years ago I made this as a rendering for my kitchen backsplash. At some point I thought, why not print it out and put it on a shelf? It's a tribute to the legendary photo from the New York Times "Lunch atop a skyscraper" and of…
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:2718242 Edit: Added split versions, use the one-piece model if you…
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:3486066 Hmu if anyone needs a split version, or if someone splits it…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
I've been doing a little research on this helmet and have put together my own rendition of this helmet based on the White Amour pictures I've listed here. I recenly made Geoffro's Mk2 helmet from his patreon web site. I'm still very new…
Added a through a hole in his skull so that you can put it on a thread. Also made a flat bottom, and now it prints without supports. Filament - YOUSU Matte Dual Color PLA <3
Come to the slightly smaller dark side! Stormtrooper skin for Soozafone's fantastic Mini 13 armature. Remix of my Lucky 13 version, with additional parts, and detailed legs. The Mini 13 version of is Vader also available. Get it here:…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Remix del diseño creado por Kalunho3d que a su vez hizo un remix del diseño de vvk187 Las mejoras que he aportado al diseño son: Diseño del pecho del Stormtrooper para que se pueda imprimir con cambio de color (M600) Las piernas se…
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
Print your own scale model ARC Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM…
A 1:12 and 1:48 scale Stormtrooper miniature! This miniature is part of a set of 20 available for purchase on my website or on my Patreon until February 2025. The full version includes separated bases, pre-supports for resin printing, and…
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
Ten model hełmu Stormtroopera został zaprojektowany z myślą o druku 3D oraz wiernym odwzorowaniu kultowego wyglądu znanego z uniwersum Star Wars. Projekt posiada wyraźne detale, gładkie powierzchnie oraz poprawne proporcje, co ułatwia…
There are actually a few of these very cool Scout Trooper models available here on Thingyverse, But hey, nothing like having plenty of choice ; )
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
A remix made for paperweight, for the weight I used 80% infill.
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
Stormtrooper First Order helmet wearable Link to the newer and more accurate Model https://www.printables.com/de/model/39467-stormtooper-tfa-helm
Mini Stormtrooper Figurine - AMS version Printed with fuzzy skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.15 Fuzzy Skin thickness: 0.15 If you're interested in the commercial use of my models, check the link to my Patreon…
Here I have my model of the ROTJ variation of the well known E-11 Blaster. I designed this after having difficulty with other models where the assembly was quite challenging and messy. All the parts have been divided into separate plates…
Come to the dark side! Minimal Stormtrooper skin for Soozafone's fantastic Lucky 13 armature. Lucky Vader needs his troopers. Get the Vader model here: https://www.printables.com/model/172706-lucky-vader UPDATE: Get C-3PO here:…
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
I really like the 5 color print, but the supports were a pain. So I redid the painting to the dark color scheme so it would only be 4 colors, which allowed me to use the 5th tool head for petg soluble supports. The supports got a bit…
An controller stand for Xbox one/series x/s and PS5 controllers. The stand is based on a stormtrooper from starwars
A big thanks to Danny for providing the low poly model. I have done with it what I could. So hopefully it will be of use for your project. Good luck and do check the sizing suits your needs, Cheers Jace Print instructions Un printed as yet!
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions : Start with Black At layer #8 (0.66mm) swap to Jade White for the rest.
First Star Wars helmet of mine, modeled in Blender based of Battlefront II character gallery. Cut in three parts for easy printing and assembly with bigger printer (I use Ender 3 Max). For smaller printer additional cuts have to be made.…
Stormtrooper Sharpshooter of the First Order. Updated model so its 1 shell and flat bottom. 2.27pm cmt 4/24/2023
Lego Storm Trooper Maxi figure At standard scaling, the assembled model stands 3.5" tall. You can decide how big you want to print it! Supports needed for printing. Have fun!
Stormtrooper helmet towing hook cover With this you should be save not to hit anything with your towing hook, it‘s a stormtrooper what should he hit? But if you hit him with your leg, it will hurt. But anyway, it looks cool. Create your…
this is the Death trooper model but with a working death whistle inside. To get the best noise don't scale up or down. Blow at angle and make Shure the is nothing obstructing holes in it. it works best if you print in two parts then…
A Storm Trooper piggy bank (money box) which is fully 3D-printed and can be opened and closed thanks to a locking screw
Straight from the Empire’s ranks, the Mini Stormtrooper is here—small, detailed, and ready for your desk or keychain! Designed for multi-color printing, this model features clean details and simple supports that are easy to remove. Inside…
Dummy 13 StormTrooper Armor Assembly : The assembly is similar to that of DUMMY 13 except for the legs. The hip piece must be assembled before the thigh piece. Attention to the assembly of the arms: the parts have a direction! BTW I made…
Thanks again to DrMckay for providing this awesome rendition of Rogue Ones Shore Trooper. I have stripped the components back and split them up to the best of my ability and it could do with some serious smoothing. Something I have yet to…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON! So I have started to design a whole series of…
Another cool model found over at FacePunch.com. Cheers Jace
Thanks Tony, yes I will continue to revisit my previous files, to improve on them where possible. Hopefully this will work for you now after these minor improvements ; ) Cheers Jace
Print your own clone army! By request of another Printables user, here's a Clone Trooper (Phase 1) skin for Soozafone's fantastic Mini 13 armature. The helmet is partially based on and remodeled from a model by Marr Velz on Sketchfab.…
I made this Lego Star Wars Kama for Lego Clone Troopers. I modeled this using SolidWorks. Check out my account for more Lego Pauldron's and kama's.
Dummy 13 X Clone Trooper Phase I Update 23/02/2025 : New CloneTrooper Phase 2 print profiles! Do you recognize him? Here is my version of the Clone Trooper Phase I These clone soldiers, created from the DNA of bounty hunter Jango Fett,…
Replacement storm trooper helmet encase you get a pretty badly squished and deformed one. One version has embossed vents/stripes just encase you prefer to paint them instead of decals. Feel free to use/modify/sell prints along as you…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Hello everybody, this is a collection / remix I did around christmas as a gift. I basically started off with the stormtrooper head https://www.thingiverse.com/thing:4267739 as kalunho3d's description supposes I used the hands and rod from…
Fits 6.5cm (diameter) x 5.5cm (height) planter.
Here is our all time favorite clone Medic!! i have remixed the model and added my own parts. the shoulders are a little hard to put on but if you put them on last it is easy!
Hełm Sithów to ikona ciemnej strony Mocy, zaprojektowany z wieloma detalami
Decoration stormtrooper helmet use supports
A detailed and realistic Stormtrooper bust , designed for fans of the Star Wars universe . With accurate proportions and elements inspired by the movie screen , this model brings a piece of the Empire right to your shelf or desk . Great…
This is a remix of Christian's Phase 1 Clone Trooper. I have broken this down into 8 pieces so that it can fit on smaller build volumes such as the ender 3 (200x200) Edit: There was an issue with the back right piece during upload, have…
👉 Join Vault Access on Patreon: https://www.patreon.com/c/TheDuckVault/membership Vault Access gets you: ✅ The commercial license to print and sell all 400+ ducks, this one included ✅ 210+ exclusive ducks, all yours to download the moment…
A lone trooper sits in silence, armor marked by battles fought across distant systems and forgotten worlds. This is no stance of victory… only a stormtrooper at rest, carrying the weight of orders given, wars endured, and an empire that…
You can how ever download different versions from here if yo dont want a full size model https://www.thingiverse.com/thing:2423889 and https://www.thingiverse.com/thing:2437223 and https://www.thingiverse.com/thing:2442198 and…
I recommend a resin 3d printer for the details. I imagine an FDM printer would lose much detail and have troubles with the overhangs. The size fits my crocs but if it doesn't for yours, adjust size accordingly. Contact me for commercial…
This is a digital 3D printable model of a LEGO blaster from Star Wars. The download contains pieces of the blaster ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on…
My Free Storm Trooper Model which is a part of my newly created Custom Bust Series. Check out all my paid busts and get access to monthly STL's on my Patreon! Patreon: https://www.patreon.com/Bayfaire/ Patron's also receive PNG images of…
If you use the sliced helmet you will need to mirror it to get the other half.
23. Feb. 2024, V1.1: Simplified Blaster E11 added Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON! So…
This a a Dummy 13 Droidbait!!! that's all i can think of to say.😅
This model is compatible with the lego system.
I designed this because I wanted to build a replica shoretrooper helmet as accurate to the actual prop as possible, not just another “cosplay model". Unfortunately I never got around to building the thing, I'm putting this out there so…
My wife thought the stormtrooper was pretty cool, and I am no painter. I didn't want to paint the stormtrooper head or the body, and figured since I had a new fancy pants Prusa XL that can do two colors, I would boot up Fusion and see…
Found this awesome file here http://www.blendswap.com/blends/view/86558 I spent the last week stripping the shells back. If you would like the suit you can grab all the files already devided up over at my shop on Etzy and create your own…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Pen Holder or flowerpot from a Stormtrooper helmet scan. Print Settings Printer Brand: Anycubic Printer: Large Size Chiron Rafts: No Supports: Yes Resolution: 0.28 Infill: 20 Filament: 3DPN PLA Category: Containers
STORMTROOPER VALVE STEM CAP FITS AUTO AND BIKE SCHRADER VALVE THREAD PERFECT FIT NO SUPPORTS PRINTED WIH REVO 6 .15 WITH 15%INFIL STANDARD SETTINGS
This model is compatible with the lego system.
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
3D Print Files in STL and 3MF format of a Death Trooper miniature! Available in 2 different scales - 1:48 and 1:12. The 3MF is in 1:12 scale. This free pose is 1 of 20 available through the Officer tier on my Patreon until March 30th,…
Its a Dummy 13 clone Waxer
I paint it with PrusaSlicer for using it with Prusa Multi Material Printers. All credits to https://www.printables.com/@FunkyArt_274361 Thank you. The frame you will find here:…
Using 3D Printy's fully printable bobblehead design and DatBuschi's stormtrooper helmet towing hook cover to make the stormtrooper helmet into a bobblehead. I printed mine using Aguila098's bobblehead extended base. Video:…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White At layer #14 (1.14mm) swap to Black At layer #15 (1.22mm) swap to rojo At layer #21…
Remixed and combined a keycap with Star Wars Figures. I have made a FULL-BODY and a HEAD-ONLY versions. Choose what you like. Print Instructions: 0.1mm height 15% infill Supports are recommended Please share\like\add a make if you liked!
I am building a set of lego heads so that my kids can try playing Star Wars Legion using lego figures as they are approximately the same scale. https://www.printables.com/social/90982-ian-foulds/collections/394300 I remixed the helmet…
Can be colored in a slicer for muticolor printing, painted, weathers, whatever youd like to create your own unique shields! 0.4mm nozzle 0.08mm layer height 2 walls 15% infill
This project made it to official Prusa YouTube Channel They had no spare LEGO plates to insert into holes, so on video project is not completly finished, but overall you can see at least how the printed parts are made 🧡 Before you go…
I've had numerious requests to see if I'd have a go at a StormTrooper Helmet. I'm still learning day by day so decided to have a go. It wast that easy and I'd used the help of other models availble here, but I believe I've come up with a…
Star Wars Snowtrooper Bust Print instructions 5% Infill with supports
This is a set of blocks that can be used to recreate the Imperial Stormtrooper and Imperial Officer (Captain) mini-figures that were part of the Final Duel II set from 2002 at 500% scale. We've included stl files to create both…
This model is sliced into 6 parts, so it can be printed without any supports. The shell is sliced straight down the middle, orient this surface on the build plate for all parts. Except for ‘Body 2’, for this part I added a sacrificial…
This Stormtrooper Helmet can be printed with minimal support. I have included a “3MF” file with the supports necessary already painted on to make this easy to print. I also included “.gcode” files for the Prusa MK3/S/S+; if you have one…
