Wyniki wyszukiwania: tucson

Sortowanie

32 modeli

P
PrintablesMartin

Hyundai Tucson NX4 2021

This model is a remix of: https://www.thingiverse.com/thing:5251321 Scale about 1/10. I did following changes: I fixed the model so it's 3D printable Attempted to turn the model into european version: removed trunk lid handle added dual…

Pobrania
1150
Polubienia
102
Ocena
5
P
Printablesradzaga

Rituals Car parfume Vent Clip - Hyundai Tucson (NX4)

Since the clip that comes with Rituals Car perfume is too narrow/small to use on the Hyundai Tucson vent wing, I designed this for the same and it fits pretty well.

Pobrania
1001
Polubienia
54
Ocena
5
P
PrintablesMartin

Seat tracks cover for Hyundai Tucson NX4 (2021-)

I recommend printing my improved version: https://www.printables.com/cs/model/654548-improved-seat-tracks-cover-for-hyundai-tucson-nx4- Layer height: 0,15 mm or lower Supports: yes, organic supports works great You'll need to print two…

Pobrania
483
Polubienia
87
Ocena
5
P
PrintablesTico

Hyundai Tucson headlight dust cap/cover

dust cap for the headlight of a Hyundai Tucson. I lost one of the dust caps while replacing a headlight so i made this design to replace it. Print instructions There are 2 printable parts, 1 dust cap and 1 seal ring. I recommend to print…

Pobrania
335
Polubienia
37
Ocena
5
P
PrintablesMartin

Hyundai Tucson NX4 trunk hook

5 perimeters, 6 top, 6 bottom layers, 30 % gyroind infill. No supports. To be pressfitted/hooked in the slit under the rear seats release lever. Use thin (0.8 to 1 mm) doublesided tape to secure hook in the place. See image bellow where…

Pobrania
303
Polubienia
40
Ocena
5
P
PrintablesMT

Hyundai Tucson NX4 (2024) Central armrest storage box

I took MKV's armrest storage box for 2022 hyundai tucson and removed dividers in the tray, added a pick up hole and rounded the edges. Thats all.

Pobrania
290
Polubienia
30
Ocena
0
P
PrintablesMKV

Kastlík pod loketní opěrku Hyundai Tucson 2022

Vytisknul jsem několik modelů než jsem trefil správné rozměry výřezů a hran na kterých kastlík drží pod opěrkou. Sedí skvěle.

Pobrania
249
Polubienia
32
Ocena
0
P
PrintablesMartin

Improved seat tracks cover for Hyundai Tucson NX4 (2021-)

What has been improved matches the look of the original cover much more sturdy better and more secure fit doesn't prevent the seat to be moved all the way to the front Print settings matte black PETG Layer height: 0,2 mm or lower 2 walls…

Pobrania
238
Polubienia
35
Ocena
0
P
Printablesmbellido

Hyundai Tucson NX4 FL (2025) Drawer Storage Box (Tray)

Tray for the drawer of the Hyundai Tucson NX4 FL (2025), designed for the Hybrid version with a steering wheel-mounted automatic shifter. I'm not sure if the drawer is the same for other versions. It fits perfectly, closes securely, and…

Pobrania
235
Polubienia
14
Ocena
5
P
PrintablesNOVELTY 3D

Posa vasos Tucson Hyundai

-Preguntar cualquier duda del modelo, Sígueme para ayudarme a crear mas modelos, un saludo amig@. Feliz impresión 3d !!!

Pobrania
119
Polubienia
18
Ocena
5
P
PrintablesGiovanni1954

MOD. HYUNDAI TUCSON (2007)

MOD. HYUNDAI TUCSON (2007) Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W

Pobrania
103
Polubienia
13
Ocena
0
P
PrintablesArtificalSUN

Hyundai Tucson (Gen3) EPB Switch Fix

EPB switch design on Gen3 Hyundai Tucson is questionable at best, so the latches that hold the actual switch are qute weak and tend to break. This (reverse engineered) design allows one to atempt a fix of the switch instead of buying a…

Pobrania
84
Polubienia
7
Ocena
5
P
PrintablesLuke

Yeti 18oz/532mL Hyundai Tucson rear cup holder

This is adapter for a Hyundai Tucson Rear Seat cup holder to suit Yeti 18oz/532mL Rambler.

Pobrania
64
Polubienia
12
Ocena
0
P

Hyundai Tucson: Přihrádka do područky

Přihrádka do prostoru v područce (přední část) pro automobil Hyundai Tucson NX4 s automatickou převodovkou. Po přidání 1mm filzu dle fotek pasuje jak má. Oproti fotkám přidány do modelu výřezy pro středící kolíky a gumu od područky (na…

Pobrania
52
Polubienia
7
Ocena
0

Tucson 2022_charging area

Tucson 2022_charging area

Pobrania
39
Polubienia
6
Ocena
0
P

Hyundai Tucson, USB-C holder

Držáček dělán pro Hyundai Tucson NX4, do kastlíku pro mobil, abych mohl používat jednoduše Android Auto. Sedí na kabel vention type-c 90°, ideálně 0.25m Mobil Samsung A54 s krytem při skládáni potřeba trochu zabrat, ale jinak sedí dobře.…

Pobrania
36
Polubienia
10
Ocena
0
Pobrania
30
Polubienia
4
Ocena
0
P
Printablesplasterek3d

Headrest Hook – Hyundai Tucson IV (Front Seat) – Jacket / Bag Holder

A practical 3D printable headrest hook compatible with Hyundai Tucson IV , designed to mount on the metal rods of the front seat headrest. Perfect for hanging: jackets and coats handbags and backpacks grocery bags small shopping bags…

Pobrania
30
Polubienia
1
Ocena
0
P
PrintablesBoleslav Doboš

Hyundai Tucson belt lid

Belt lid replacement for Hyundai Tucson models 2004-2010

Pobrania
28
Polubienia
8
Ocena
0

Tucson manual 2022_Phone holder

Tucson_2022_Phone holder

Pobrania
27
Polubienia
7
Ocena
0
P
Printablesslamajak

Ash Tray/Bin for Hyundai Tucson

This Ash Tray / Bin for Hyundai Tucson (2022-2026) is designed to be placed in the central cup holders. Ideally print from ABS as the car can get very hot. You'll need to put an axle through the opening for the lid to work. The model…

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesBoomRMX

Hyundai Tucson NX4 FL (2025) Centre Storage Tray (Console)

The Hyundai Tucson features a deep storage compartment in the center console. I liked the design by mbellido, but I wanted to make a few modifications, such as adding a handle and a coin holder. Unlike the original design, this version…

Pobrania
24
Polubienia
5
Ocena
0
P
PrintablesBitSmith

Tissue & Trash Holder for Hyundai Tucson (or any vehicle)

Finally got a new car! It's wonderful, but there is nowhere to put a tissue box or trash box. So here's a tray to hold a "standard" square tissue box and a cute, little trash can I got on Amazon.…

Pobrania
20
Polubienia
0
Ocena
0
P
PrintablesMonsterdhruv

Tucson nline 2024 armrest organizer

Hello everyone, I have a hyundai tucson 2024 and having a big armrest storage is a mess in itself. S I designed an arm rest organizer that is useful for storage of certain items. card box - for storage of card and cash bills, medicines,…

Pobrania
18
Polubienia
4
Ocena
0
P
PrintablesSweCreations

Hyundai Seatback Angle Adjustment Knob 88121-A6000 (Kona, Tucson + more)

Hi! Made this to replace the broken seatback angle adjustment knob on our much-loved Hyundai Kona EV! It appears to be used on other Hyundai models as well like the Tucson and i30 I believe. Part number is 88121-A6000. The mounting clips…

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesLonglife2012

Smartphone Holder for New Tucson NX4

I developed a smartphone holder for my new Tucson NX4. I use the CUPHOLDER for this and can easily place my S25 (and S23 also) The model is adapted for ASA. I would also recommend this as printing material. PETG is not durable enough for…

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesBrad Grier

Garage Door Remote Holder for door pocket of 2022 Hyundai Tucson

The Tucson doesn't have a sunglasses pocket over the mirror (at least mine doesn't) so I created this simple holster to store it in the driver-side door pocket. It's out of the way, not easily visible, and easily accessible to the driver.

Pobrania
11
Polubienia
3
Ocena
0

rear window lift handle Hunday Tucson JM

rear window lift handle Hunday Tucson JM

Pobrania
8
Polubienia
2
Ocena
0
P
Printables

Tucson, United States - 3D Miniature

3D printable topographic miniature of Tucson - 🇺🇸 United States Capture the beauty of Tucson 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 32.223, -110.975…

P
Printables

Headrest Hook – Hyundai Tucson IV (Front Seat) – Jacket / Bag Holder

A practical 3D printable headrest hook compatible with Hyundai Tucson IV , designed to mount on the metal rods of the front seat headrest. Perfect for hanging: jackets and coats handbags and backpacks grocery bags small shopping bags…

P
Printables

Ash Tray/Bin for Hyundai Tucson

This Ash Tray / Bin for Hyundai Tucson (2022-2026) is designed to be placed in the central cup holders. Ideally print from ABS as the car can get very hot. You'll need to put an axle through the opening for the lid to work. The model…

P
Printableshgross

Tucson, United States - 3D Miniature

3D printable topographic miniature of Tucson - 🇺🇸 United States Capture the beauty of Tucson 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 32.223, -110.975…

Polubienia
0
Ocena
0