Ataturk
I wanted to make his bust because he was an important name in the struggle for independence and freedom. I would be happy if you use it by stating my name.
- Pobrania
- 570
- Polubienia
- 37
- Ocena
- 0
437 modeli
I wanted to make his bust because he was an important name in the struggle for independence and freedom. I would be happy if you use it by stating my name.
Zulfikar Sword Islamic symbol Hz.Ali
Türk Bayrağı ikonu Ay Yıldız Araba Süsü. İçi Oval bir askı tasarımı yaptım. Böylece astığınız ip zarar görmeyecek ve hareket açısı artacaktır. 🇹🇷 Evinize, odanıza ya da arabanıza asabilirsiniz. Destekleriniz bekliyorum.
This is a fun playful decoration for the thanksgiving season. This Turkey is designed so that you don't have to use supports .
This is probably the simplest turkey you will find out there to 3d print. Make sure you print with supports. But once you print it, you'll see why i made it. You might laugh a little too! Please enjoy!
Ich hatte mir folgenden Bohrer/Polierer/Schleifer gekauft: https://amzn.to/3GEpQrH Leider war der Akku nach 4 Ladzyklen defekt. Ich war aber damit für gelegentliches Entfernen von Stützen und fürs Platinenbohren sehr zufrieden und wollte…
I have found the 3D model as I have mentioned below and then I have printed it with Grey PLA. From the beginning, I noticed it was bad first layer calibration but I let it continue to see the result. :) With better first layer…
All Things STL is providing a Turkey for Thanksgiving!! You can “paint” the bird in your favorite slicer and it works great. Enjoy! No support needed!!
Puffy and simple in appearance models of a turkey, chicken, and duck. All tasty birds for a thanksgiving day feast. Printing tips: Some supports are needed especially for the underbellies and beaks. I recommend tree supports. They can be…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Happy Thanksgiving/Merry Christmas my friends! Just a fun little turkey kit for you all. Prints quick so get a production line going and hand them out to your friends and family! Not really much else to say about this one... it's cute I…
Printed with Artillery Sidewinder X2 Nozzle = 0.4mm Layer height = 0.12mm Infill = 15% Scaling factor = 150%
Thanksgiving Turkey Napkin Ring designed in Tinkercad. Two versions available - one with feet and one without. I prefer the one with feet so it can double as a table decoration while eating. I printed mine with 10% infill, random seams…
Just in time for Thanksgiving! I've been trying to stick to parts that look like actual Lego bricks and I couldn't find anything Thanksgiving related. So I put together this turkey leg. This is designed to print without any supports the…
Little turkey earrings to suit the fall season. Printed in PLA+ at 0.1mm layer height, 30% cubic infill.
Just some funny turkey thanksgiving themed earrings. I made them by request from a co-worker and thought i'd share since they're pretty funny. For the hooks i just used some cheap ones off of amazon http://a.co/1h9X3NL Category: Earrings
Updated 11/1/2022 to add square version of card. The original dimensions are 148mm x 78mm x 1.44mm. At 0.30mm layer height, it will take 37m to print. The square dimensions are 188.7mm x 188.7mm x 2.5mm. At 0.30mm layer height, it will…
Dear all, Happy Thanksgiving ! 🦃 We’ve just released this turkey model, available in four different toy and keychain styles, with or without feet. The model is designed for easy printing with no supports or assembly required. Just a heads…
I haven't been able to get one of the Jenkins Spindles for my wife so I figured I'd design one myself. I took inspiration from their designs and from Snyder Spindles. There are three sizes of spindles. I believe the large is similar to…
I wanted some Thanksgiving studs for @MagnumDanger's giant LEGO holiday wreath, so here's a turkey that can be painted for maximum fancy decor. Printed this with supports. Thank you @Inhibit_38095 for the original turkey model. Wreath can…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Here you have what I think is the cutest turkey I ever printed Tom-Tom will be the favorite on your thanksgiving dinner. with his pumpkin body, colorful tail and cute red wattle you can be sure that it will not leave anyone indifferent.…
A model of the flag of modern Turkey (Türkiye). The uploaded .STL is a version where the height is 50MM but the included Fusion 360 file is parametric, and the height can easily be adjusted via a user parameter, the model should scale…
Turkey cookie cutter 4" wide ½"deep gobble gobble
skitch23's adorable napkin holders with a flat bottom rather than the ring/feet. I recommend printing one as a test to make sure they fit your napkins and then scaling as needed. Birds in pic are .2, 4 perimeters, 15% infill, ironing on.…
Introducing the Turkey Spinner - Your Thanksgiving Fidget Fun! 🦃 Tired of the same old fidget spinners? Want to add some Thanksgiving flair to your fidgeting fun? Look no further! The Turkey Spinner is here to gobble up your stress and…
Cute and Compact 3D Printable Turkey Introducing our adorable 3D printable turkey, designed for those who appreciate unique and charming décor without the bulk! This small and cute turkey model is perfect for adding a festive touch to…
Highest details available with strong legs and a flat base. A realistic animal sculpture ready for painting. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D Gobble up some Thanksgiving fun with this 3D printed turkey model! Perfect for your holiday table or seasonal decor, this little turkey is…
Enjoy these lively turkey earrings that are perfect to wear for the autumn season. Just print twice and add hooks for a pair of earrings, or use as a necklace charm or a keychain decoration. Adjust the earrings to your preferred size, or…
İstediğin zaman çıkarıp takabildiğin 1tl ile şişe açacağı. 2023'den sonra 1tl daha ince (1.6mm) olduğu için iki farklı versiyon mevcut. eğer paran 2023'den önce basılmış ise 1.8mm olan versiyonu kullanmalısın. type-c soketli versiyon da…
Freestanding Turkey Vulture modelled on my buddies at Cascades Raptor Center Originally designed for a macro-photo diorama, primary feathers and ankles are very thin. Shrinking the model is not recommended Designed for resin printing
Info Working mini bows wih arrowhead. Both are design from pictures of Hungary and Turkish bows. Bowstring is from ordinary rubber band. Hungary bow - simple design Hungary bow - real look Turkish bow Arrowhead is design for 3mm skewers.…
Turkey Earrings I print all of my earrings with a .2 nozzle Can be made into a pendant and/or Keychain by scaling up. Check out my large selection of earrings . Check out my other Christmas earrings: Spiral Christmas Tree Earrings Angel…
After looking for a good 3d mount to print for my turkey fans/ tail feathers, I couldn't find any. So I decided to design one myself. Here is what I came up with. The mount hangs with one simple screw on the wall, or is stable enough to…
cobbled together the parts from this MMU turkey model to make one you can print without an MMU - adjusted each color's height so that you can just do pause and change filament to get all the colors in. .20mm layers work pretty well,…
This is just a funny little print for Thanksgiving. A wall art turkey you can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a…
Nozzle: 0.4mm Layer: 0.16-0.24 (Recommended) Scale it as you like :)
Remix of https://www.thingiverse.com/thing:2029362
Magazine loading assist for 12GA magazines. Tested with stock Panzer Arms 5 round 12GA mags, Rock Island Armory 9 & 19 round 12 GA mags. No others available to test yet but it should work on most 12ga AR style magazines. You will need…
This is a Turkish Spindle I designed for a friend who needed one for her weaving. It doesn't require supports. I printed it in PETG.
I printed with a .8mm nozzle and it worked great. There are a lot of overhangs and bridges in this but it worked well only supporting the ones in the center with the custom supports. I also put in a support for the beak that you can…
Hebel des Stellmotors der Temperaturklappe rechts bei einem VW T5 mit Klimaautomatik. Dieser ist bei mir leider gebrochen und VW führt ihn nicht als Einzelteil. Er besteht aus drei Teilen die alle ohne Supports gedruckt werden können. Im…
Darth Turkey needed some minions. Enter Storm Turkey! I used Meshmixer to combine 3 other projects (See the "This remix is based on" section). This model complements my other Star Wars themed turkey, Darth Turkey.…
Turkish Air Force MMU Stealth Fighter
Is your partner mad at you during Thanksgiving? Does your partner love Friends ? Just stick your head in a turkey and do a funny dance! I'm sure they'll forgive you. Or just print this for them, I don't know. My wife suggested Monica with…
Add some holiday charm to your Thanksgiving table with these festive napkin holders! They come in four fun designs, a Autumn leaf, Pumpkin and two differen Turkey designs. Perfect for adding that extra touch to your family dinner setup. ✨…
A stylized low poly 3D model of a Thanksgiving turkey, featuring clean polygonal geometry and smooth faceted surfaces. The model captures the festive roasted turkey form with drumsticks and a plump body, blending seasonal charm with a…
genelde pet şişelere uyum konusunda sorunlar yaşanıp çöpe dönen baskılardan sıkıldıysanız ihtiyacınız olan model ektedir
Just in time for Thanksgiving an MMU Turkey. Designed for the MMU or the Palette, it is not able to be printed in multiple parts then be glued together. For Palette printers read instructions below. Please post makes and remixes as it…
This is davebob3's Silly Little Turkey model which he was nice enough to put the OpenSCAD files of up for all of us to modify. Thanks! This turkey has had it's nose un-pointed for less eye poking. It's also re-rendered. For some reason…
Original model https://www.thingiverse.com/thing:3957882 I included a .3mf set up for a Mosaic Palette 2S. I sank the model into the plate a little to get a flat first layer. STL included to paint your own for MMU, Bambu or other multi…
Turkey keychain to celebrate the Thanksgiving You can print in both colors just by stopping printing halfway through Check also my model of this Turkey but bookmark version Hope you like it
Nozzle: 0.4mm Layer: 0.16-0.24 (Recommended) Scale it as you like :)
Even the dark side enjoys Thanksgiving. Enter Darth Turkey! This model was inspired by a school craft my nephew brought home. I used Meshmixer to combine 3 other projects (See the "This remix is based on" section). If your Darth Turkey is…
Fun little turkey day design for the corner of your door or window.
***DO NOT SELL*** ASK ME ABOUT TERMS/CONDITIONS ABOUT SELLING Continuing the fall designs, say hello to this articulated TURKEY!!! This amazing bite sized animal which can also double as a children's toy. As always, LIKE, MAKE, SHARE,…
Turkey is one of the top tea consumer countries in the World. Turkey's northern region yields vast amount of tea each year. In addition to that tons of tea imported from overseas. For most of the people in Turkey every day starts with tea…
Change filaments at your preferred layers to get the color scheme you want. Make and sell all you want!
Yo imprimo con altura de capa 0.32 y relleno del 10%
Winner, Winner, Turkey Dinner! 🦃🍗 In this one-of-a-kind feast, the main course is a presidential blend of politics and poultry! Served fresh with a side of American flavor, this model of President Trump’s head on a roasted turkey brings a…
Description: My wife had a really cool wooden turkey thing she got from her grandfather which holds a bunch of suckers fanning out as the feathers. I thought it was really awesome so made a copy of it in CAD. I attached a picture of the…
Türk polisi logolu dekoratif stand. Ayrıca isminizi de yazabilirsiniz.
Turkish Airlines is one of the best airline company in the world. Many people proud of them. This is a desktop logo for their lovers.
This is a great gift for friends/family on Thanksgiving. It is also a great decor for you Thanksgiving table! I designed this model using Tinkercad . Mostly I used the “scribble tool” to make it. How to print: It is pretty easy to print,…
This turkey is in disguise, trying to avoid the dinner table by blending in with the garden gnomes. Prints easily without supports in about 3 hours. There are 2 versions of the hat included. One plain for the “Turkey in Disguise” and one…
The cute thanksgiving turkey is fully print in place but flexes and fidgets and can even stand on his own little legs Included is 2 separate profiles, the H2D profile contains 5 colors & P1S contains 4 colors, easily swap colors using…
This model is compatible with the lego system.
A custom set of 1/144 scale weapons for use on Gunpla Models, based on the styling of mecha designer Ippei Gyoubu and his work on Gundam: The With From Mercury's Jeturk House Mobile Suits. Included are: Beam Bazooka Beam Rifle Shot…
Perfect gift for your Turkish friends It is a 2 colour print, using simple method, you don't need any fancy tools, just ad a colour change on Prusa slicer on 2.2 mm change the filamwent hight if you using 0.2 layer hight. Happy printing…
With great details and a nice flat bottom, this guy can be scaled from tiny to HUGE! Perfect for decorating & gifts. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld…
Turk keychain. A similar design was made based on a popular model
My 7 year old designs his own toys. He decided to take his shot at modeling a turkey for Thanksgiving. His skill with Tinkercad has been progressing. He used the scribble tool for the feet and the feathers. We worked on using the align…
I resculptured the bust slightly. Category: People
This is a low poly turkey I designed for the Low Poly Contest here on Printables.com!
The simplest tool for spinning fibers into yarns. Available in 3 sizes and designed to print well on any printer without supports. Fully tested and verified to work great by a legitimate fiber arts expert. Very popular items.
It's a wreath made of turkeys for all your holiday needs. Use as a wreath on your door to greet your Thanksgiving or holiday guests. Use as a centerpiece during your holiday feast (with a can of cranberry sauce in the middle… yum).…
Supports on back of hat should be added Print at 200% and it makes a cute wine topper
Printed with organic supports on build-plate only
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- The CF Turkey transforms the iconic bird into a bold…
A fun turkey shaped Happy Thanksgiving sign for your holiday decorations. I leveraged one of the image AI's (ideogram) to create the art, cleaned it up and created the layers in Photopea, and assembled into 3D in Tinkercad. I printed with…
I wanted to make a Thanksgiving model to share with family and friends. I have included the plain turkey (no legs) as well as the bobble version. For the no leg version, you need to print the turkey and 7 feathers. For the bobble version,…
Want to bring the stunning geography of Turkey into your next 3D project? This high-resolution Turkey map 3D model file offers a meticulously detailed design that’s perfect for personal or professional use. Highly Detailed and Realistic:…
A festive turkey just in time for Thanksgiving. I've also included a version of the model with a hole in the back, perfect for hanging it up with a 3M "command" style hook. Something like this would fit perfectly:…
This is a quick, fun print perfect for Thanksgiving…and all the loose change in your drawer:) This toy wobbles back and forth thanks to the weight of the coins. I included four Wobble Turkey STL files: one for dimes, pennies, nickels and…
Cute turkey original model: https://www.thingiverse.com/thing:4007410 Nozzle: 0.4mm Layer: 0.16-0.24 (Recommended) Scale it as you like :)
Get ready for the up coming feasts this holiday season with this new model! Print Settings - .2mm layer height - Supports needed for face holes Assembly The bone should pressure fit into the leg but may need some glue to secure it. How to…
it prints well in bridge mode at that size Have fun