Liczymy pasujące modele…
Model of the original wheel hub cap for VW T4 (not 100% identical). Part number 7D0601151. Two versions available: Complete model that will need supports. Model split in two halfs that doesn't need supports but needs to be glued together…
Update: May 5th 2024 The model has been revised to improve the hinge. This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). Print instructions Rafts: No Supports: No Layer Height: 0.2mm…
Just a CPU protection tray for Intel LGA1151 CPU's Good for storage or shipping! PLEASE NOTE RECOMMENDED LAYER HEIGHT Updated: 6/29/2024 Added version for 7th and 8th Gen Print Settings Layer height: 0.15mm - 0.20mm Support: None
This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). I've remixed the original model so that you can see the CPU model, with a small window at the top.
I print this with PET-G at a 0.3mm layer height, works great.
I scaled it a bit up so the CPUs fit with no force and created the 2 by 2, 3 and 5 variations. Tape can be added to form an easy pull tab on the cover. I have printed 3 * 2x4 (with 10% infill) at a time on my Replicator+ and it worked…
Needed parts: M8 bolt M8 nut 1 cent (euro cent) coin. Printing advises: 100% infill on both parts, at least on part 2. 200 microns is enough, but it is better to print in 100-150. working even with PLA you can use lubricant on the rail…
This model is able to convert old CPU coolers (in my case a lga 775 cooler)that have holes that are 38mm apart from each other. It will make old coolers useful again. Screws required are m3.
This is the Last Battle set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
This holder allows you to reuse an old 478 Intel socket cooler for more recent sockets like 1150, 1151, 1155, 1366 and others with 75x75mm hole mounting. In my case, I had to trim some of the fins to clear the capacitors on the board with…
Need four M2x3mm or super glue Print settings: Turn on support 0.2mm layer height
got a bunch of scrap motherboards with CPUs in them. CPUs worked fine but needed a way to store/ship them, so i decided to mount them to the heatsinks to make them more convenient. fits most CPUs 37.6mm Category: Computer
All that is needed are: 2 M3x4mm screw (cylindrical)
Box for 250 CPU LGA 775, 1150, 1151, 1155, 1156 box dimensions 210x210x90 mm *** model is experimental - for me is working fine in future ill try make universal box for more cpu sizes like s3 s5 s7 s370 socket A, s754, AM2/AM3 and some…
Pretty simple design. I wanted something that was stackable and optimized for shipping. I made a single CPU version and a 9 CPU version. All versions are stackable. The one with “Tight stack fit” in the name was a first revision of the 9…
A case for the LGA 1200 / 1151 socket (not for the processor). This will protect the BGA balls and pins from damage.
If you are converting your HP 600 800 ProDesk EliteDesk G2 PC to ATX Case you will need a backplate to secure the original CPU cooler to the Motherboard unless you use an aftermarket cooler. You could use this bracket. Print in PETG for…
While working on my 535is I needed the vent hose that connects from the valve cover to the intake boot. I had ordered the part but it hadn't arrived yet and I wanted to start the car to troubleshoot some other issues. I created this model…
A case for the LGA 1200 / 1151 socket (not for the processor). This will protect the BGA balls and pins from damage.
This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). I've remixed the original model so that you can see the CPU model, with a small window at the top.
Had an LGA1151 Motherboard with a noisy CPU cooler on it. I wanted to re-use the Zalmen cooler I had from an older AMD Motherboard. Printed in PETG with >20% infill
CPU Case for LGA 1151 (Specifically the 8700K), I use just a bit of Filament for the hinge.
