Liczymy pasujące modele…
I searched far and wide for a replacement throat plate or a 3D model of a throat plate for Ridgid Saw MS1290LZA, to no avail. The model was discontinued. The old plates became brittle and broke apart. This design is much stronger and more…
I designed GP wings for the KTM SuperDuke 1290R 2021. Very easy installation: I recommend printing from PA12 or PC Blend Carbon Fiber
This is frame plug for KTM Superduke 1290 R 2017 with airtag holder. I recommend print in TPU.
3D printed Carpuride GPS holder, with holes for screws and nuts. Steel head bolts 6 hexagonal internal Ø5 x L.20 mm
In my case, when mounting this I found the original KTM display screws too short and so replaced them with some M5 x 12mm Socket Flanged Button Screws (ISO 738002) Stainless Steel (A2) from Accu, along with some 5.3mm x 10mm x 1mm Flat…
I was looking for a phone holder for ktm super adventure 1290 and i found ram mounts X-grip but no nice way to mount it on the bike so i design this one. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts:…
1290 Super Duke GT Sidebags Wall Holder
This is frame plug for KTM Superduke 1290 R GEN 3.0. I recommend print in PETG. You will also need a 3 pieces 22 x 2 mm O-ring for a perfect fit.
This is frame plug for KTM Superduke 1290 R GEN 3.0. I recommend print in PETG. You will also need a 3 pieces O-ring 22 x 2 m for perfect fit.
I needed some extra luggage on a trip a while back and made this mount to attach my Kriega bag to the luggage rack of my KTM 1290 SAS. Printed at 100% infill with Jet Black Prusament PETG to avoid any nasty surprises while going down a…
Mount is held on with zip ties and uses 4 M3x16 bolts.
Adapterplatte zum Anbringen verschiedenster Taschen mit Mollesystem. Vornehmlich gedacht um Warnwesten und Verbandkasten griffbereit zu haben und eine kleine mobile Werkzeugtasche (oben) mit Klettverschluss mitzuführen. Gedruckt aus PLA+…
This is a re-created version of KTM/Husqvarna "Marking Mandrel" Pt.# 78129032000 intended for timing the balancer shaft when re-installing the side case on a KTM 450/500 or Husqvarna 450/501. Here's a YouTube video explaining the process:…
Custom-designed screw and frame covers for the KTM 1290 Super Duke, optimized for 3D printing. Adds a clean, finished look while protecting exposed hardware. The set will be continuously expanded with additional covers and plugs that I…
This hinge ist for the AEG Parts numbers : 2231129012 2231128014 Left and Right are identical I was very fried and really pissed off at AEG for their crap quality this hinge broke after 3 months of use and even after two new free hinges…
KTM 1290 Super Adventure R (SADV-R) front radar sensor (not installed on R version) hole delete
Schlüsselanhänger KTM Duke 1290.
Side stand extender for the KTM Super Adventure R 2021+ (other models not tested) Several model files are available for single and multi material printing, depending on the type of fasteners and if they are printed with or without any…
If you've added a side stand sensor bypass but have still left the original side stand switch attached, here is a cover for the plug so it doesn't fill with mud. Fits: US Model 2017-2024 Husqvarna 701 - Enduro & SMC & Vitpilen EU Model…
I created this simple little part to see if raising the spoiler/visor on the Puig Touring Screen would make my bike any quieter at speed. The specific screen is here (M&P site, Puig direct somehow never lists this one), although I imagine…
Vial remover that fits under the Agilent rack to push up your vials so you can easily remove them - especially handy for those tight corners! Special thanks to PS and JLC for the inspiration Print Settings Printer Brand: Prusa Printer: I3…
Aesthetic front wheel slider KTM 1290 SDR. Can be used with 2 m6x60 bolts and washers, or a m10 rod with washers and nuts. (See drawing) Print the Slider cap 2 times and use a color change if you like. Be aware that it's designed to look…
I modified the original author's bar to flip the ends 180 degrees to better fit the KTM 1290 SA's mount points.
Jensite Carplay screen mount for KTM SuperDuke 1290 GT gen 1(2016-2018) for the navigation mount. I have the "7 version, I think the other sized have the same mount on the rear. Link to Jensite screen(no referral):…
Introduction: A friend of mine bought a CarPlay unit for his KTM 1290 Super Adventure X , but struggled with the usual bulky mounts that stick out too far anbd blocks most of the dash.So, this design was born - a clean, compact…
Hier ein kleines Gadget um die Kette zu fetten
Some simple adapters for the KTM 1290 Super Adventure R and S (2021+ tested) windscreen to make it tilt more forward on the top mounting points. As a taller super adventure owner the wind hits my helmet visor which is very loud, so i made…
Small organizer. The base plate isn't actually necessary. Fits sleeved cards and allows the lid to close flush.
This light guide is designed to fit the Acteon Newtron LED Scaler Handpiece and is a replacement for the original (part E12903). The first picture shows the scaler with the replacement part inserted, and the second shows an original to…
Hiermit ist es möglich eine Action-Cam an der Gabel mittels Klebeband und Kabelbindern zu fixieren
Tie down point for the luggage rack of the 1290 super adventure r/s 2021+ for the straps of my new Odinsberg Ragnarok 7L bag. The slots are 27x7mm wide. I printed these with about 5 perimeters and a large amount of infill in ASA for extra…
This was designed for the Lasko Xblower x12900. This is a Blower adapter with 2 3" vent duct openings. Its not a overly smooth and clean design and looks a lot like a lego brick but works for what I needed it to do. I was trying to find…
This is a protecting case/cover for the Samsung "Frame" TV remote control called BN59-01290A (check inside the battery cover for your model). It is printed in TPU on stock Creality Ender 3 with support. The back of the case is a bit too…
