P
Printablestheflow.fr
Gridfinity simple bin 1x1x6
here's a simmple gridfinity bin
- Pobrania
- 401
- Polubienia
- 23
- Ocena
- 5
Wyniki wyszukiwania: 1x1x6
Liczymy pasujące modele…
P
Printables3DSpenny
Gluestick Holder 30mm - Gridfinity 1x1x6
A 1x1x6 Gridfinity bin designed to hold your gluesticks or other items with a 30mm diameter. For reference, this will fit a 40g Elmer's Purple Gluestick. Hole diameter: 30.8mm Hole depth: 35mm I'd recommend using a magnet base for better…
- Pobrania
- 352
- Polubienia
- 43
- Ocena
- 4,71
P
Printablesidenny1
Gridfinity Needle File holder 1x1x6 (added step files)
I adjusted the size of the holes to 4.7 mm to fit my handles. Added step files for easy changes.
- Pobrania
- 325
- Polubienia
- 49
- Ocena
- 4,56
P
Printablesnickd
Gridfinity Funnel 1x1x6
Remixed to sit upside-down in a single gridfinity 1x1 square.
- Pobrania
- 311
- Polubienia
- 53
- Ocena
- 4,94
P
PrintablesDarkBrave
Ender 3 Snippers and Scraper Gridfinity Module (1x1x6)
I made this little 1x1 Gridfinity module to hold the scraper and snippers that come with most Ender 3s, in my case the Ender 3 V2 Neo, but I'm sure it would work with other Ender models. I used the dimensions from petkata's tool holder ,…
- Pobrania
- 149
- Polubienia
- 13
- Ocena
- 5
P
PrintablesDarkBrave
Smaller Gridfinity Pen/Pencil Holder (1x1x6)
Smaller version of the pen/pencil holder featured in the original Gridfinity release. It does store fewer utensils, but also takes a shorter amount of time to print and is smaller.
- Pobrania
- 134
- Polubienia
- 9
- Ocena
- 5
P
PrintablesDarkBrave
Wider Gridfinity Deburring Tool Holder (1x1x6)
I made this little 1x1 Gridfinity module to hold this deburring tool I found on Amazon and its ten extra blades. I based the module itself of the parametric Gridfinity modules Zack Freedman provided on his initial Gridfinity video . I…
- Pobrania
- 131
- Polubienia
- 12
- Ocena
- 0
P
PrintablesSandro
Lego piece 43888 1x1x6 pillar
This is lego piece 43888, also known as the 1x1x6 pillar I found it online as a .ipt file and converted it to .stl with fusion360 It is used in a few sets, I am using it for the Lego Saturn V launch escape system I suggest you print it on…
- Pobrania
- 128
- Polubienia
- 11
- Ocena
- 0
P
PrintablesTica
Gridfinity key chain holder 1x1x6 & 2x2x6
A key holder box for gridfinity Variants: 1x1x6 2x2x6
- Pobrania
- 104
- Polubienia
- 7
- Ocena
- 0
P
PrintablesSpokelax
Gridfinity Bin Labels: Hex Nuts & Washers for 1x1x6_D2_L12_S10
Pretty much nothing to explain here. — Custom size — Fusion files are available in zip. ↪ “Small text” version has a height of 3.5 (useful for decimals) while “Big text” has 4.5. Edit text, then extrude 0.4mm and you're ready to print. —…
- Pobrania
- 81
- Polubienia
- 11
- Ocena
- 0
P
PrintablesVanwilla
Ender 3 Flush Cutters/Snippers 1x1x6 Gridfinity bin
Small 1x1x6 Gridfinity bin designed to hold the Ender 3/5 Flush Cutters/Snippers point down for safety. Uses about 24g of filament when printed at 10% infill. Fusion filed uploaded in case anyone needs to modify!
- Pobrania
- 75
- Polubienia
- 10
- Ocena
- 0
P
PrintablesDrew Fleury
Vertical Xacto knife + blades + Brass/Metal brush + ruler holder Gridfinity bin 1x1x6
Was not happy with the offering of vertical gridfinity bins that would hold an Xacto-like knife along with blades in an attractive but safe way, therefore I designed my own. I noticed that I did not need to store more than 10 extra blades…
- Pobrania
- 71
- Polubienia
- 10
- Ocena
- 5
P
Printablesletsprint
Gridfinity 1x1x6 vase mode box only 6g
Inspired by other gridfinity boxes I've made mine 1x1 box that can be printed with only 6g of filament My print settings are: vase mode, 3 bottom layers, .28 first layer height, .2 other layers height, 0.6mm wall thickness I was printing…
- Pobrania
- 58
- Polubienia
- 10
- Ocena
- 5
P
PrintablesTomie M
Gridfinity Craftright Precision Craft Knife Holder 1x1x6
Has a small round over on the edges to help the knife easily slide in. The model fits within a Gridfinity 1x1 and is 6U high.
- Pobrania
- 52
- Polubienia
- 9
- Ocena
- 4
P
PrintablesIsaac
Gridfinity 1x1x6 pin holder for miniature painting
The holes will likely need to be reamed, but they're specced to 1.5mm and 2.5mm. This works with brass rods you can get for pinning, and the 2.5 is about right for most round toothpicks. STEP files are included so you can edit the hole…
- Pobrania
- 50
- Polubienia
- 15
- Ocena
- 5
P
PrintablesLongy
Gridfinity - 1x1x6 Wuben C3 Flashlight Holder
This is a gridfinity compatible holder for the Wuben C3 Flashlight. In case you are wondering whether this model might fit your flashlight as well: The hole for the flashlight has a diameter of 27mm. The small cut out rectangle is 6x11mm…
- Pobrania
- 46
- Polubienia
- 5
- Ocena
- 0
P
Printableshubert felix
Eraser pro tool kit | tipp-ex mini + staedler rasoplast rubber holder | 1X1X6 gridfinity
Eraser tool pro kit! Display side by side your favorite tipp ex and rubber. A bit loose for the tipp ex due to the akward design but very functionnal!
- Pobrania
- 42
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSegan Designs
Gridfinity CR Battery Holders 1x1x3 and 1x1x6 Stackable
I designed these to fit well inside @unrepentantgeek 's Modern Gridfinity Case . Two sizes are available for each battery type, 3u if you want to stack two together and 6u if you want to use full height in the default case. The inset text…
- Pobrania
- 33
- Polubienia
- 5
- Ocena
- 5
P
PrintablesRobbieDIV
Wood Board Substitute (Building) 1X1X6
Use as a substitute piece to your small woodworking projects,
- Pobrania
- 28
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDimensional Draft
Gridfinity 1x1x6 Parametric Bin – Free STL (Magnet Pockets)
Free high-precision 1x1x6 Gridfinity bin STL A clean and precise 1x1x6 Gridfinity bin designed with real-world tolerances and usability in mind. Key features: Base tolerance: 0.25 mm → actual size 41.5 × 41.5 mm for perfect stacking fit…
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 5
P
Printablesmekanics
Gridfinity Apple USB Power Adapter 20W EU Holder (1x1x6)
This is a Gridfinity compatible holder designed specifically for the Apple USB Power Adapter 20W EU version. It features a compact 1x1x6 form factor, making it perfect for keeping your adapter neatly organized in your Gridfinity setup.…
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMedieval Muffin
Gridfinity Flashlight Holder 1x1x6
Gridfinity Model for flashlights with a 26,5mm diameter hole Size 1x1x6
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSK
Gridfinity 1x1x6 AAA Battery
This is a basic AAA battery holder for Gridfinity. It is 1×1×6 Gridfinity units. The batteries fit slightly loose to accommodate any battery that is thicker than average.
- Pobrania
- 20
- Polubienia
- 8
- Ocena
- 0
P
Printablesnightrain912
Gridfinity Wire Spool Set 30–36 AWG (3 pcs, 1x1x6)
For 36 AWG wire — approximately 75 meters per spool (also suitable for thicker wires (30–35 AWG) with proportionally reduced length) Each spool consists of two parts that press-fit together without glue. There is no built-in alignment…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKubaRocks
Bin for basketball needles 1x1x6
Print config: PLA 10% infill gyroid pattern 0.20 mm layer
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFSOCIETY
Revoltage Beam Holder + Charger 1x1x6U Gridfinity
A Revoltage Beam Holder + Charger 1x1x6U for Gridfinity. If you want to use it to charge your pod you need a 90 degree USB-C Adapter you can put inside the holder.
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLucas G.
Gridfinity bin 1x1x6 for Festool Domino cutters D5 & D8
I am preparing myself to rebuild storage solution in my garage to gridfinity. Original Festool boxes are rather bulky just for one bit so I designed bin that fits four of them. Inside holes can be sanded a little bit to avoid scratching…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBratensoße
1x1x6u Gridfinity Bin with slidable lid
Storing small items but being able to block one half while pouring out.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0