Liczymy pasujące modele…
Because I could not find a free model for an additional cup holder, and charge 20$ for 3D printed ones seemed weird, I decided to create my own. A standard European McDonald's cup fits just fine. Version 1.1 has hole for small light, and…
A friend of mine removed a set of damaged wheel covers from his 2019 Kia Niro, only to find a decent set of painted alloy wheels underneath. They look great, but they are missing a center hub cap, exposing the axle nut or center of hub to…
You can print this instead of using the 3is shifter. it allows you to use whatever shift boot cover you want. You will need a shifter retainer/collar to keep the shift boot from sliding down. You may need to adjust the size depending on…
Designed with OpenSCAD, sliced with PrusaSlicer 2.5.2 (with 40% fill density & 4 perimeters for extra strength). I printed mine with cheap off-brand PLA and had no problems. Use at your own risk. I'm an amateur aircraft builder and an…
This model has been the result of many prototypes. Fits the original key extremely well. Print with manual supports painted in the areas shown, and with as fine as a layer height as possible. Simply slide the buttons into the main piece,…
If you are building a RV12iS aircraft, then depending on where you live you may not need to fit an Emergency Locator Transmitter and you may consider it more appropriate to carry a Personal Locator Beacon. This model is a small plate…
This is the Spinner Plate Spacer described on page 38iS/U-06 of the RV12 Kit Assembly Instructions, revision 1 dated 12/19/18. You will need two of these temporarily while fitting the top cowling. Important ! Use at your own risk. After…
