P
Printablesvice
Lego Mandalorian's N-1 Starfighter (75325) Stand
Printed at default 0.20mm 15% infill.
- Pobrania
- 1048
- Polubienia
- 127
- Ocena
- 4,94
Wyniki wyszukiwania: 325
Liczymy pasujące modele…
P
Printablestato_713
Samsung Galaxy A32 4G a325 case
Originally published here: Samsung Galaxy A32 4G a325 case by tato_713 - Thingiverse This case is for the Samsung A32 4G (models started with a325), the 5G version is a bit bigger. For the 5G version (a326 models), see this . Some of the…
- Pobrania
- 840
- Polubienia
- 22
- Ocena
- 4,67
P
PrintablesMTek
Customizable Round Box with Lid: for Stanley Stanley 14325 Organizer
Customized version of http://www.thingiverse.com/thing:189264 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=189264 Print instructions Category: Containers Instructions Using the following options:…
- Pobrania
- 795
- Polubienia
- 53
- Ocena
- 5
P
Printablesthall72
Lego Compatible (32556.dat) Technic Pin Long
This model is compatible with the lego system.
- Pobrania
- 498
- Polubienia
- 60
- Ocena
- 0
P
Printablesthall72
Lego Compatible (32568.dat) Bionicle Compatible Mask Kakama
This model is compatible with the lego system.
- Pobrania
- 384
- Polubienia
- 49
- Ocena
- 0
P
Printablesthall72
Lego Compatible (32506.dat) Technic Bionicle Claw with Axle
This model is compatible with the lego system.
- Pobrania
- 365
- Polubienia
- 51
- Ocena
- 0
P
PrintablesLjhtom (Javier Hernando)
3250_Support for remote controls
Basado en mi modelo, adaptado a los mandos a distancia. dos modelos con diferentes anchos Fotografías de modelo laminado con @ideamaker con textura. https://www.printables.com/es/model/250790-toothbrush-holder
- Pobrania
- 300
- Polubienia
- 65
- Ocena
- 0
P
Printablesthall72
Lego Compatible (32532.dat) Technic Brick 6 x 8 with Open Centre 4 x 6 with Cross Underside Studs
This model is compatible with the lego system.
- Pobrania
- 276
- Polubienia
- 26
- Ocena
- 0
P
Printablesthall72
Lego Compatible (32577.dat) Bionicle Compatible Tohunga Torso
This model is compatible with the lego system.
- Pobrania
- 273
- Polubienia
- 40
- Ocena
- 0
P
Printablesthall72
Lego Compatible (32579.dat) Bionicle Compatible Head Connector Block (Tohunga)
This model is compatible with the lego system.
- Pobrania
- 253
- Polubienia
- 30
- Ocena
- 5
P
Printablesthall72
Lego Compatible (30325.dat) Minifig Helmet Mining
This model is compatible with the lego system.
- Pobrania
- 249
- Polubienia
- 37
- Ocena
- 0
P
Printablesbwmartens
Gridfinity 5x1 bin for Klein Tools 32500 11-in-1 Screwdriver
This loosely fits the Klein Tools 32500 11-in-1 Screwdriver. There is no lip for making it stackable since the screwdriver sticks up above the body anyway. UPDATE: Based on feedback, I've added a finger hole. Both models are available.
- Pobrania
- 243
- Polubienia
- 26
- Ocena
- 4,5
P
Printablesthall72
Lego Compatible (32578.dat) Technic Bionicle Compatible Matoran Claw Arm
This model is compatible with the lego system.
- Pobrania
- 243
- Polubienia
- 37
- Ocena
- 0
P
Printablesthall72
Lego Compatible (32525.dat) Technic Beam 11
This model is compatible with the lego system.
- Pobrania
- 238
- Polubienia
- 22
- Ocena
- 0
P
Printablesthall72
Lego Compatible (32578.dat) Bionicle Compatible Tohunga Disk Thrower Arm
This model is compatible with the lego system.
- Pobrania
- 230
- Polubienia
- 34
- Ocena
- 0
P
Printablesthall72
Lego Compatible (32576.dat) Technic Connector 3 x 4.5 x 2.333 with Pin
This model is compatible with the lego system.
- Pobrania
- 221
- Polubienia
- 32
- Ocena
- 5
P
Printablesthall72
Lego Compatible (27325.dat) Minifigure Neck Collar Fur Smooth
This model is compatible with the lego system.
- Pobrania
- 208
- Polubienia
- 37
- Ocena
- 0
P
Printablesthall72
Lego Compatible (32531a.dat) Technic Brick 4 x 6 with Open Centre 2 x 4 with Cross Underside Studs
This model is compatible with the lego system.
- Pobrania
- 203
- Polubienia
- 21
- Ocena
- 0
P
Printablesthall72
Lego Compatible (13251.dat) Minifig Hair Female with Elaborate Knot Bun
This model is compatible with the lego system.
- Pobrania
- 199
- Polubienia
- 39
- Ocena
- 5
P
PrintablesStawiamKlocki.pl
Fire Sword for LEGO CMF 29 71052 - Bionicle Tahu Cosplayer Minifigure | 57488 32558 Bionicle Weapon Toa Flame Sword 2 x 12 with 2 Pin Holes
The new Tahu Cosplayer minifig is great - but it's missing proper sword. Print him a new one! Use: 0.15 layer PLA works good SLOW SPEEDS - like 15mm/s Project is not exact original Tahu fire sword replica - it has been modified to be used…
- Pobrania
- 197
- Polubienia
- 35
- Ocena
- 0
P
PrintablesAXUL
Enclosure for Wuzhi Audio ZK-3002 TPA3255 Digital Amplifier Board Stereo 300W x2 Bridged Mono 600W
No screws required, 2 clamps are used instead to hold the 2 enclosure parts together and also serve as feet. Steps to assemble: 1. Place the board into the bottom of the enclosure. 2. Place the top of the enclosure over the bottom one. 3.…
- Pobrania
- 169
- Polubienia
- 14
- Ocena
- 0
P
PrintablesJohn
LEGO Der N-1 Starfighter des Mandalorianers (75325) Stand
This is a stand for the LEGO Der N-1 Starfighter des Mandalorianers (75325). I used transparent PETG, no bottom layer and add a modifier for 3 perimeters at the top of the stand.
- Pobrania
- 162
- Polubienia
- 23
- Ocena
- 0
P
PrintablesSander Leenders
Lego Compatible (32555.dat) Technic Brick 5 x 5 Right Angle (1 x 4 - 1 x 4)
This model is compatible with the lego system.
- Pobrania
- 159
- Polubienia
- 10
- Ocena
- 5
P
PrintablesRiceCakes
pxn v10 325mm wheel
Just print the parts, put pegs in one side of each piece, put the pieces together, then screw it on. I didn't use glue or anything and It's pretty sturdy. Need to print 6 pegs.
- Pobrania
- 150
- Polubienia
- 8
- Ocena
- 0
P
PrintablesS.Eisenhut
Astra J headlight cleaning system nozzle holder 13258411 13258412
Astra J headlight cleaning system nozzle holder with the part numbers 13258411 and 13258412
- Pobrania
- 135
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMitchell Takes
Cupholder for E36 BMW 325i
The cupholder on my 1995 BMW 325i E36 never actually properly held a drink whether it was a can or XL fountain drink. I made this to fit in the factory cupholder spot. A yeti and soda can both fit, but I haven't tried much else yet. You…
- Pobrania
- 131
- Polubienia
- 19
- Ocena
- 0
P
PrintablesBrainanator
Viewsonic VESA Mount (vx3258-2kc-mhd)
Designed this for a friend to adapt his monitors (Viewsonic vx3258-2kc-mhd) to a VESA mount, this is 100x100 spacing. I printed them out of carbon fiber polycarbonate. You'll need M4 screws (maybe about 20mm?) and 4 M4 lock nuts to attach…
- Pobrania
- 94
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSimple3D
1965 Tonka Toys Police Jeep #325 and 1962 Elvis Surrey Jeep #350 Striped Hardtop Roof
My friend collects old Tonka Toy Vehicles. In 1965, Tonka make a police jeep #325 with a black & white striped hardtop roof. In 1962, they made a #350 Pink& White Surrey Jeep. There is also a green roof from the Vintage 1965 Tonka Jeep…
- Pobrania
- 88
- Polubienia
- 27
- Ocena
- 0
P
PrintablesHogwartsTrain
Battery box flange 50325MY1000 for Honda Africa Twin RD07 / RD07A
FINAL PRODUCT: see pics battery flange 50325MY1000 for RD07 / RD07A print it in ASA / ABS or some Heat resistant filament use supports 30% (or more) infill
- Pobrania
- 83
- Polubienia
- 5
- Ocena
- 0
P
Printablesjmynheir
NATO Jerry Can Nozzle Gasket Wavian 2325N
Replacement gasket for the high quality Wavian Jerrycan spouts. This is not the same as the gasket that goes in the jerrycan lid. Part number 2325N. The gasket for the Jerrycan lid is 2325 and can be found here…
- Pobrania
- 80
- Polubienia
- 15
- Ocena
- 0
P
Printablesthall72
Lego Compatible (32580.dat) Technic Axle Flexible 7
This model is compatible with the lego system.
- Pobrania
- 78
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMartijn Demeulemeester
BMW E30 325iX Girling brake reservoir cap
Replacement cap for the brake fluid reservoir on a BMW E30 325iX as these are no replacements available any longer.
- Pobrania
- 78
- Polubienia
- 11
- Ocena
- 0
P
PrintablesYvesM
Weber Gasgrill SPIRIT E-325 GBS Lenkrollen Adapter
Beim Weber Gasgrill SPIRIT E-325 GBS (Modell 2025) fehlten mir die kleinen Lenkrollen. Im Original sind einseitig nur Standfüsse verbaut, ich bevorzuge jedoch Lenkrollen weshalb ich einen entsprechenden Adapter konstruiert habe.…
- Pobrania
- 77
- Polubienia
- 4
- Ocena
- 0
P
Printablesdim20
Suzuki Ignis Sport (HT81S) Enkei Wheel Hub Cap (54.1mm) (43250-80G00-LD8)
( 43250-80G00-LD8 ) This is a hub cap/center cap for the original OEM Enkei white wheel set for the Suzuki Ignis Sport. Diameter is 54.1mm so it might fit other wheels too with some changes. I recommend wrapping a single layer of…
- Pobrania
- 74
- Polubienia
- 3
- Ocena
- 0
P
Printableswhiteknight4415
Star Wars The Mandalorian's N-1 Starfighter 75325 wall mount
wall mount with added support for N-1 starfighter
- Pobrania
- 68
- Polubienia
- 2
- Ocena
- 0
P
Printables3D addict
Klein MM325 Multimeter Command Strip Wall Mount
My solution to mounting my Klein MM325 Multimeter to my apartment wall with command strips. I personally used Command 15 lbs Velcro strips (linked below), but anything smaller would also work. I designed this model to be printed upside…
- Pobrania
- 66
- Polubienia
- 21
- Ocena
- 5
P
PrintablesFlavora.studio
Range Rover L322 - Outer CV Joint Boot - Part No. LR032576
This is a CV Joint Boot for the front left CV Joint on a Land Rover Range Rover - original part number LR032576 ... works exact the same as the original but for fraction of the costs if made on your 3D printer using TPU
- Pobrania
- 62
- Polubienia
- 5
- Ocena
- 0
P
Printablesbyteswap
Volkswagen Jetta MK4 Dash Kit for Sony XAV-AX3250 (Toolless / Screwless)
Custom dash kit to install a Sony XAV-AX3250 in a MK4 volkswagen Jetta (mine is from 2004, but I believe it should fit all MK4 Jettas, and potentially other VWs from the era). Is a toolless and screwless install. When printed face down…
- Pobrania
- 61
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJohn
LEGO Der N-1 Starfighter des Mandalorianers (75325) NEW DESIGN
I found the look of the N-1 not nice enough, so I designed a few special parts. I printed this in silver pla with 3 perimeters and no infill.
- Pobrania
- 60
- Polubienia
- 16
- Ocena
- 5
P
Printablestinfoilhat
XY-AS21HPA (TPA3255 AMP) Frame
took inspiration from : https://www.printables.com/model/1332736-fosi-audio-zk-tb21-amp-frame decided to make one for XY-AS21HPA (TPA3255 AMP)
- Pobrania
- 57
- Polubienia
- 9
- Ocena
- 0
P
Printables3D_HRLV001
Wall Mount (90 angle) Tapo C320 / C325WB
Model Camera Wall Mount 90 angle for TP-LINK Tapo C320 / C325WB You will need screws: 3x M3 screw (approx. 15mm long), 3x M3 nut for camera fixation, 3x For walls - good for you (concrete, wood, metal, etc.) Models: - Without holes - Hole…
- Pobrania
- 54
- Polubienia
- 7
- Ocena
- 0
P
PrintablesSeraaron
Steam Deck Clip-on Stand for "Anker 325 (PowerCore Essential 20K) 10W Battery Bank"
The Anker PowerCore Essential 20K battery bank isn't really powerful enough to charger the deck while you play, but it's the battery bank I have, so I wanted to make a clip to hold it. You can buy the same model here:…
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 0
P
PrintablesAG3D_STUDIO
10mm rod Z axis - 325mm for Bear Prusa MK3 / MK3s / MK3s+ / MK3.5
I modified the upper mounts for 325mm long shafts from Prusa MK4.
- Pobrania
- 51
- Polubienia
- 15
- Ocena
- 0
P
PrintablesBrixodin Performance 3D
Illusion BMW E30 - 325i
Bonjour, Voici un petit élément décoratif sur le thème de la BMW E30. Vous y verrez, selon l'angle de vue, soit la forme du véhicule soit le modèle en toutes lettres ! Si vous n'avez pas d'imprimante n'hésitez pas à me contacter pour…
- Pobrania
- 46
- Polubienia
- 5
- Ocena
- 0
P
PrintablesStephen Massman
24mm x 325mm rod for paper towels
I mocked up a simple rod in Tinkercad with 12 sides. No supports needed for me. Rotate 45 degrees to fit on printer as needed. I printed it on a Elegoo Neptune 4 Plus.
- Pobrania
- 46
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSkrattoune
Lego Technic Liftarm 32526 (large L) Organizer - 13x7
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
- Pobrania
- 43
- Polubienia
- 10
- Ocena
- 0
P
PrintablesChuffine
325mm MGN12 Rail Center Piece
Print the same way as all other Stealth Press parts.
- Pobrania
- 38
- Polubienia
- 6
- Ocena
- 0
P
PrintablesVince Thyng
Weber Genesis E-325 Grill Replacement Knobs
One of my knobs was flaking its top layer off so I designed replacements. Each knob is 2 parts held together with compression. No support material needed during print. I suspect they will work for other Weber models. Printed on both a…
- Pobrania
- 35
- Polubienia
- 2
- Ocena
- 0
P
Printablesstritti
Zeppelin LZ-129 Hindenburg - multicolor - scale: 1:325
Zeppelin LZ-129 Hindenburg for multi-colour 3D printers, featuring the original ‘Hindenburg’ lettering.
- Pobrania
- 35
- Polubienia
- 1
- Ocena
- 0
P
Printablesdbv
IKEA Ivar foot, floor protection, 10325292, id02.17
This is a make for the popular IKEA ivar cupboard floor protection. There seems to either be a shortage of those or they are going out of production, I could not find them on the Ikea website any more. So I made my own. I added a screw…
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 0
P
PrintablesWIESEMANN 1893
Tool Holder for Wrecking Bar Small (325mm) 036 I ENFORCE I for screws or peg board
Tool holder for Large Wrecking bar 325mm. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 60mm W - 22mm H - 95mm We design…
- Pobrania
- 32
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMattDoesStuff
BMW E9x 325i Rear Diff Output Seal Installer
Designed this simple diff output seal installation tool for my E92 325i (3.0L). It makes installing the seal easier and accurate. I would recommend printing it with a high infill density to give it strength, especially if using PLA, and…
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
Printablesbrass_ring
325 WSM Stacking Loading Block
325 WSM stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDaniel Andino
Drawer for components 120 x 325 mm
The drawer has a usable size of 120 x 325 mm and contains a total of 48 single compartments. Assembly instructions https://drive.google.com/file/d/1qCtDpzN-aBK7WvKwzcGi4CXTSFUXvq7o/view?usp=drive_link
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 0
P
Printablesrunwayfour
Klein MM325 Multimeter Screw Mount
Hey everyone! Just wanted a screw mount version of this. All credit to 3d addict @Bourgeois_2851285 for the design! This is my first post so go easy on me, I've been learning to design in blender for a few months now and done some more…
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
Printablesbrass_ring
325 WSM Vase Mode Stacking Loading Block
325 WSM Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your regular…
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLjhtom (Javier Hernando)
3252_Xiaomi Air Fryer clamping
Piece to prevent movement and fall of the fryer. Check that to remove the food tray, it moves, and may fall, with this support it prevents the sliding movement, and it can be moved without any problem by going up.
- Pobrania
- 18
- Polubienia
- 8
- Ocena
- 0
P
PrintablesPetriT
4 x Tapo C325WB sky camera setup
Holder for 4 Tapo C325WB cameras with rail and floor pieces. Note: I'll make a new 5 camera setup soon, since promised 127 degree FOV is actually 110 degrees. (FOV in these cameras is diagonal FOV! So it's actually more like 110×70…
- Pobrania
- 15
- Polubienia
- 5
- Ocena
- 0
P
PrintablesZombeeH8er
PrimeWeld TIG325X Chiller Mounts
Designed these holders for my dad so that he can easily sit the chiller unit on top of his PrimeWeld TIG325X Tig Welder. Yes I know it's probably not the best idea to have a reservoir of coolant sitting on the top of a welder, but it…
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCrafty_Ham
325x325x.2 first layer check
I designed this as a multiple case calibration. Since ive switched to FreeDi firmware ive been learning how the machine works & how to improve it at least for my case. Ive been spending more time tuning & editing the printer.cfg to be…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSheharyar Ajmal
Epson L-3250 Printer Ink Storage
A storage solution for spare ink bottles for the Epson L3250 (Eco Tank) color printer.
- Pobrania
- 11
- Polubienia
- 5
- Ocena
- 0
P
PrintablesL7899
Mikuni 13251-02410-000 VM12, VM14 float bowl gasket
Mikuni 13251-02410-000 VM12, VM14 float bowl gasket for Suzuki PV50 12mm-14mm carburetor Printed in TPE.
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAgent 114
SCP-11325
lore coin from popular youtube show unus annus
- Pobrania
- 8
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGabriele Pica
DIN rail mounting adapter designed for Milesight industrial routers USR325 .
DIN rail mounting adapter designed for Milesight industrial routers USR325 . This adapter allows secure installation of the router on standard DIN rails commonly used in electrical cabinets and industrial environments. The model has been…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJager
Thermocouple case for UNI-T UT325F
Convenient cases for storing thermocouples in the original tool box.
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMassimo Masciullo
Magene P325CS crankset cap plug
plug to close this hole in this crankset from mud/dust ect
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAguaSal
CARCASA PARA AC ADAPTER MODELO DL65200325
Carcasa para proteger a lo que seria el Adaptador de Corriente Alterna y al cable
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printables3dcalu
Dual Fuji NP-W325 battery cover plus dual SD holder
Italiano sotto ENG : Cover for two Fuji NP-W325 batteries integrated with a dual SD cards holder. 3D project (.f3d and .step files) included, feel free to remix (e.g. adding a full-empty slider indicator...no time to do it myself :-) )…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNovi
LHC3257PIK - LocknLock Featherlight One-touch Tumbler 500ml - Handle
Project Name: Custom Handle for LocknLock Thermal Tumbler Target Model: LocknLock LHC3257PIK (550ml Pink Vacuum Insulated Mug/Bottle) Purpose: Provides an ergonomic carry grip to improve portability and usability for daily outdoor or…
- Pobrania
- 5
- Polubienia
- 3
- Ocena
- 0
P
Printablesjmvspeleo
racket cleat lock TSL325 verrou de cale
les cales de ces raquettes se mettent souvent sous le pied sans que l'on veuille. j'ai ajouté un verrou que je peux manoeuvrer avec le bâton the cleats of these snowshoes often get underfoot unintentionally. I added a lock that I can…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablesComputersAndCats
Emachines foot for vintage mini tower mATX case for T2692 T3120 T3256 T2682 and more
These should work with most vintage Emachines towers of the DDR memory era. The ones with the black or grey case and rounded silver front. Honestly you could also use them with any other computer case as well though. You might want to…
- Pobrania
- 4
- Polubienia
- 3
- Ocena
- 0
P
Printablesgig4ntic
BRIO Bridge Replacement (33253 Compatible)
This is a replacement part for the BRIO bridge system (33253) . If one of your supports is missing or broken, this model provides a simple and functional alternative. The design is optimized for easy 3D printing and does not require any…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGreg Marton
Dirt Devil DD3254 dustbin latch
Make sure to print laying on the side, and use something springy like PETG or ABS or ASA, not PLA.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPadu
Support CAM - D-LINK DCS-8325LH
Filament : PLA Nozzle : 0.4 Layer : 0.2 Support : Organic / Intelligent
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
Printables
Support CAM - D-LINK DCS-8325LH
Filament : PLA Nozzle : 0.4 Layer : 0.2 Support : Organic / Intelligent
P
Printables
Lego Compatible (32525.dat) Technic Beam 11
This model is compatible with the lego system.
P
Printables
Lego Compatible (32580.dat) Technic Axle Flexible 7
This model is compatible with the lego system.
P
Printables
Klein MM325 Multimeter Screw Mount
Hey everyone! Just wanted a screw mount version of this. All credit to 3d addict @Bourgeois_2851285 for the design! This is my first post so go easy on me, I've been learning to design in blender for a few months now and done some more…
P
Printables
Range Rover L322 - Outer CV Joint Boot - Part No. LR032576
This is a CV Joint Boot for the front left CV Joint on a Land Rover Range Rover - original part number LR032576 ... works exact the same as the original but for fraction of the costs if made on your 3D printer using TPU
P
Printables
pxn v10 325mm wheel
Just print the parts, put pegs in one side of each piece, put the pieces together, then screw it on. I didn't use glue or anything and It's pretty sturdy. Need to print 6 pegs.
P
Printables
DIN rail mounting adapter designed for Milesight industrial routers USR325 .
DIN rail mounting adapter designed for Milesight industrial routers USR325 . This adapter allows secure installation of the router on standard DIN rails commonly used in electrical cabinets and industrial environments. The model has been…
P
Printables
Dirt Devil DD3254 dustbin latch
Make sure to print laying on the side, and use something springy like PETG or ABS or ASA, not PLA.
P
Printables
Fire Sword for LEGO CMF 29 71052 - Bionicle Tahu Cosplayer Minifigure | 57488 32558 Bionicle Weapon Toa Flame Sword 2 x 12 with 2 Pin Holes
The new Tahu Cosplayer minifig is great - but it's missing proper sword. Print him a new one! Use: 0.15 layer PLA works good SLOW SPEEDS - like 15mm/s Project is not exact original Tahu fire sword replica - it has been modified to be used…
P
Printables
325 WSM, Pocket Snap Latch Modular Ammo Box
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
P
Printables
325 WSM, Recessed Spring Latch Modular Ammo Box
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
P
Printables
ORGANIZZATORE GT325
ORGANIZZATORE GT325 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
P
Printables
325 WSM, Spring Latch, Snap Hinge Modular Ammo Box
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
P
Printables
325 WSM, Snap Latch, Snap Hinge Modular Ammo Box
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
P
Printables
325 WSM, Double Spring Latch, Snap Hinge Modular Ammo Box
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
P
Printables
Lego Compatible (13250.dat) Leg Mechanical, Darth Maul
This model is compatible with the lego system.
P
Printables
3 x Tapo C325WB camera stand
With this you can attach four Tapo C325WB cameras top of one 2cm x 2cm x 2m pole and use them as your "all-sky" camera. Wires can be guided through the base. PETG, 15% infill, 0,2mm layer
P
Printables
325 WSM, Double Snap Latch, Snap Hinge Modular Ammo Box
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
P
Printables
Hot Wheels 63258 front axle
Replacement for broken Hot Wheels 63258 front axle. Print with support. My car went back to life! Works like charm. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: Yes **Resolution:** 0.15 - 0.2 Infill: 30%…
