Liczymy pasujące modele…
little bit of hot glue is nessesary for good hold in tray , ideal for making a battery from cells , its made for my mini 10w solar system in garage if printed please add a make thanks
I didnt love the velcro straps in the wind so I am designing a nicer sturdy clamp for the patio railings. Should only need two to secure the gates. Plus they look a bit nicer than the velcro.
This is a simple wallmount for the Bosch smart eBike system Battery Charger 4A BPC3400. No support needed, 25% infill. OpenSCAD file included as always. Have fun!
Hi there, I would like to share my first design for the BOSCH eBike Battery Charger BPC3400 4A Charger Model No: EB12.110.001 Have fun with it! I used 4x40 screws and 6 dowels When you screw it to the wall, don't overtighten!
This model is compatible with the lego system.
Compact wall mount for Bosch ebike battery charger 4A BPC3400 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer guidance.
I couldnt find a fitting wallmount for my charger so I got enspired by this one: https://www.printables.com/model/287990-holder-for-bosch-charger and designed my own. You can print it without any supports if oriented on the angled side >:)
Wandhalterung für das Bosch E-Bike 4a Ladegerät (Smart System - BPC3400) Wall bracket for the Bosch E-Bike Battery
For my bike charger I found a.m. charger wallmount. The basic function (holding 4A-charger and mains cable) were excellent. I added a plug holder sidewards for the battery plug. So everything is safe! After installation I saw that the…
Original: https://www.printables.com/model/372300-bosch-ebike-charger-holder-bpc3400-4a/remixes
Wallmount for BOSCH_BPC3400 4A eBike Battery Charger, Remix from arminth and FuWeissingers Wallmount, with Plug Holders on both Sides . Printed with Das Filament PETG clear, 25% Infill, no Support needed. Prusa MK3S+ 0.6 Nozzle / 0.30mm
Keep your lens cap safe and always at hand. This is a lightweight and durable holder designed specifically for the Nikon D3400 (or any lens with a 55mm cap ), allowing you to clip it directly onto your camera strap. No more stuffing the…
A simple way to recycle some disposable vapes and use batteries from them. You need only two M2x4mm screws and powerbank module you can buy it on amazon. https://www.amazon.com/Converter-Step-Up-Lithium-Charging-Protection/dp/B09GHT9MC2…
einfacher Wandhalter für das Ladegerät in Garage oder Keller.
A replacement door handle for my Beko CSE 3400 fridge from which the original snapped off. The replacement part (part number 4326391000) costs far too much, so I designed a replacement that fits. It may fit other Beko fridges made around…
Recently I have been working a lot with batteries recovered from disposable electronic cigarettes. This is a great source of li ion cells, but due to their unusual size(13mm x 40mm) I've not found any reasonable solution to hold them…
Replacement knob for Grundig Satellit 3400
Description Bosch eBike Charger Wall Mount – BPC3400 I designed this wall mount to neatly store a Bosch eBike charger (BPC3400). It keeps the charger off the floor and makes cable management much cleaner in a garage or charging station.…
Plano® 3400 StowAway Ammo Rack Insert – .22 Long Rifle (200 Rounds) This precision-designed insert transforms your Plano 3400 Series sealed container into a secure, organized storage solution for .22 Long Rifle ammunition . Designed to…
7HU Gridfinity holder for the Lingui 3400 crystal lift. This is the most common “cheap" crystal lift so if you bought it for around 20€/$ - this is most likely the correct one even if the name doesn't match.
Uses 2x #6 screws. Print in anything rigid besides PLA, it will be too brittle and snap in a few months, if you need to bend it again I needed a mount to hold this old N600 wireless router I am now using as a switch. I plan to configure…
Plano® 3400 StowAway Ammo Rack Insert – 9mm (100 Rounds) This precision-designed insert transforms your Plano 3400 Series sealed container into a secure, organized storage solution for 9mm ammunition . Designed to hold 100 rounds in a…
Battery tray for 2x 2S 3400-3600mAh Lipo Batteries (standard size). Used on Extreme Flight Slick 580 105.5" with Thunder Power batteries TP3400-2SPX25, but can fit other similar batteries.
An keiner Stelle im Internet konnte ich ein Gehäuse für einen 476 Akkuumbau finden. Weltweit das Erste ? Kaum zu glauben. Gedruckt hatte ich schon, passt gut, jedoch fehlte mir immer die Zeit, da noch ein paar 18650 einzubauen. Drucken…
I added an opening on the side for the EXT_5V wiring to come out. Is it on the "wrong" side because I'm dumb or because that's where i needed it? The world may never know (it's because I'm dumb). It works for me, so I'm not inclined to…
🇵🇱 Obudowa do powerbanka z ogniw z jednorazowych papierosów Prosta i kompaktowa obudowa do zbudowania własnego powerbanka z użyciem ogniw pozyskanych z jednorazowych papierosów elektronicznych. W obudowie mieszczą się 3 ogniwa , ale w…
Passend für: Adam Hall 3400 und 87160 Zuerst wird die Schablone mit eingesetztem Innenteil auf der Holzplatte positioniert und mit doppelseitigem Klebeband fixiert. Jetzt kann mit der Oberfräse und einem passenden Bündigfräser die…
This is a multi-compartment insert for the Plano 3400 Stowaway case . The ridges are sized correctly to mate to the uneven surface to prevent item transfer between bins (up to some limit of small items). The bottom of the bins are cupped…
A minimalist and clean wall mount holder for Bosch eBike chargers. Keep your garage or workshop organized with this custom-designed wall holder. It features a central cutout that keeps the original Bosch logo visible while securely…
simple holder box/case for 13400 batteries / vape batteries It accommodates 9 batteries
Made for use with https://au.steadyrack.com/pages/wall-mount-bike-racks Two holes in the top are for M4 threaded inserts (should use M3 but I didn't have any of them!!!). Fusion 360 print file included in case you need to adjust. Loosely…
Custom-fit organizer insert designed for the Plano StowAway 3400 series cases. This insert securely holds the FNIRSI GC-01 Nuclear Radiation Detector and a USB charging cable , keeping sensitive equipment protected, organized, and easy to…
This model is designed to protect your Bosch smart system charger BPC3400 from damage while handling it. With the integrated feet, the charger will hover a little bit above the floor. This keeps rocks and stones from scratching it and…
This is a replacement ADB port cover for the PowerBook 3400c. The port is found on the left side of the laptop. I have found this port cover to be missing on a lot of PowerBooks so made this part based on pictures I have seen. Because I…
A very low cost ESP32-based hardware status dashboard for OpenMediaVault (OMV) NAS devices. This project uses a host Python script to send system metrics to a SPI TFT display mounted in the NAS chassis. The CAD Designs featured are made…
Pièce d'usure qui casse fréquemment : ce clip se fixe sur la crémaillère du verrou et assure le maintien/guidage du mécanisme. Idéal pour réparer un verrou existant sans racheter l'ensemble complet. Dimensions de la pièce : env. 21,6 x 26…
in slicer YOU MUST MAKE A CUT IN THE GAP BETWEEN THE T-RING AND THE ADAPTER it is caused by a malfunction while i was editing this model i used petg to print it and i'ved glued it with super glue
Original: https://www.printables.com/model/372300-bosch-ebike-charger-holder-bpc3400-4a/remixes
This model is designed to protect your Bosch smart system charger BPC3400 from damage while handling it. With the integrated feet, the charger will hover a little bit above the floor. This keeps rocks and stones from scratching it and…
Wandhalterung für das Bosch E-Bike 4a Ladegerät (Smart System - BPC3400) Wall bracket for the Bosch E-Bike Battery
This is a multi-compartment insert for the Plano 3400 Stowaway case . The ridges are sized correctly to mate to the uneven surface to prevent item transfer between bins (up to some limit of small items). The bottom of the bins are cupped…
A minimalist and clean wall mount holder for Bosch eBike chargers. Keep your garage or workshop organized with this custom-designed wall holder. It features a central cutout that keeps the original Bosch logo visible while securely…
I added an opening on the side for the EXT_5V wiring to come out. Is it on the "wrong" side because I'm dumb or because that's where i needed it? The world may never know (it's because I'm dumb). It works for me, so I'm not inclined to…
An keiner Stelle im Internet konnte ich ein Gehäuse für einen 476 Akkuumbau finden. Weltweit das Erste ? Kaum zu glauben. Gedruckt hatte ich schon, passt gut, jedoch fehlte mir immer die Zeit, da noch ein paar 18650 einzubauen. Drucken…
