Liczymy pasujące modele…
I present to you another maze, a little bit harder. This time a 35x35 corridor maze. In slicer, please scale the model by 1000 factor. The model has 3 parts: - the maze and the base - this is complete model (17.4 cm) - the maze (17 cm) -…
Hotwheels x IKEA x 3D printer. Introducing the Hotwheels Sannahed Insert display solutions. All you need to do is print 4x either the 10 or 12 rack for your frame insert. This will fit snugly into the frame and you can display 40 or 48…
dimensional test cube, it can calibrate printer and profile for optimal dimensions
Angle Connector 35x35mm with 5mm holes for M4 Screws Winkel 35x35mm mit 5mm Löchern für M4 Schrauben
These are the base plates (and spacers) needed for the wide Ikea Eket drawer with 70x35x35 cm dimensions. I used two 5x5 baseplates, two 5x1 baseplates and two 6x2 baseplates. I also created some small spacers for the sides and the back.…
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 6mm² cable M4 screw holes
Plate for a FC - fixed by zip ties
---> English Drainstand + Raiser for Flowers and Plants! Drainstand: If you want to messure your EC or pH-parameters befor and after watering it's usefull to use a Drainstand. The Drainstand ist also usefull if you just want to be sure…
Need a 35x35mm tripod quick release? This should do the trick. It fits my Sunpak tripod, but should fit most that take a square model with two angled sides. My current configuration with this has a 5/8 inch ¼ 20 bolt through the bottom,…
Simple but sturdy bracket. Countersunk 4mm holes. Made to stiffen up an old table.
Angle Connector 35x35mm with 5.2mm holes for M4 Screws Winkel 35x35mm mit 5.2mm Löchern für M4 Schrauben
ATTENTION: Printer with at least 350x350mm bed required. This print is placed in an IKEA Sannahed 35x35 frame between the passe-partout and the back wall, providing a holder for placing a Lego Botanicals set on top, for example. When…
Protector simple de suelo para estanteria modular de 35x35mm en L. Impreso en PLA y con poco filamento. Se puede escalar si tu estanteria es de 40x40 u otra dimensión.
A fun maze! Size is 35 x 35. Use a 4mm steel ball. You can find the solution in the pictures. Fun toy or puzzle for everyone!
https://www.ikea.com/gb/en/p/sannahed-frame-black-80459117/#content https://www.aliexpress.com/item/1005002048512739.html?spm=a2g0o.order_list.order_list_main.77.2a881802ZVR2Nl
35x35mm reinforced bracket with 2x4 countersunk holes for 3.5mm diameter ISO standard screw. I printed its material from PLA as it won't be exposed to a lot of heat.
cover and a foot for a rectangular square tube 35x35
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 4mm² cable M4 screw holes
PC4-M10 passthrough fitting mounts for 35x35 Aluminium Extrusions. Print as shown in the Sliced picture, Small hole at the bottom. Supports from Print bed only.
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 1.5-2mm² cable M4 screw holes
The 35x35x35mm angle bracket, best strength in PETG. enjoy ! Category: DIY
35x35 Aluminium Extrusion 20mm Shaft mount. Shaft is removable through the top for use as Filament Holder. Print with the open side up. Needed Parts: Self aligning nut + Screw, Wood Shaft or PVC Rod - OD=20mm
In order to mount a splitterbox to my Ikea lack stack I printed these small brackets. It is optimised for material usage andcan be printed without brim. I used PETG, 20% filling.
In order to mount a splitterbox to my Ikea lack stack I printed these small brackets. It is optimised for material usage andcan be printed without brim. I used PETG, 20% filling. Please like ! and feel free to donate. Thanks. Category: DIY
A simple litre box for workpieces with a maximum profile of 35x35 mm. Addionally it brings a small indentation for an easy mounting of pipes. Slots are 0.8 mm wide. Printed it myself in PLA, but PETG might be better.
https://s.click.aliexpress.com/e/_mLOMD2R
Einfacher Kantenschutz für Regale oben und unten. Simple edge protection for shelves, top and bottom.
In order to mount a splitterbox to my Ikea lack stack I printed these small brackets. It is optimised for material usage andcan be printed without brim. I used PETG, 20% filling. Please like ! and feel free to donate. Thanks. Category: DIY
