Liczymy pasujące modele…
I really do not know who designed this or rather scanned this, but i believe this must be on this site. I don't think Thingiverse has much time left. This is a 1 to 1 replica of the original, it just snaps in place really well. (Altough…
This container is designed to catch the fabric which was cutted off. It fits the W6 454D Overlock. Just open the flap and put the nose on the side of the container into the opening. After closing the flap the container is secured on the…
I needed to bolt some stuff to the aluminium extrusion profile I found in the basement. Found out that 4545 is rather exotic/not as popular as 2020/4040, and other tslot nuts doesn't scale linearly for this extrusion, so had to make my…
This model is compatible with the lego system.
Hochklappbarer Anschlag um Serienmäßig gleiche längen zu sägen. Querschraube M5 x 80 Loch für Knauf 8mm, Ideal für M8 Gedruckt aus PLA.
This model is compatible with the lego system.
Hellsing ARMS 454 Casull nerf pistol. Not for kids, this thing hits hard. 9 bearing BCAR ensures accuracy. 8 round magazine. Hardware kits for this model can be found here:…
Have you, like me, broken the small plastic piece for the camera on your Raspberry Pi? Then I have a little glimmer of hope for you. Print this file multiple times on opposite sides of the print bed with 5mm/s and 100% infill. This is a…
This model is compatible with the lego system.
A stackable bullet box with a hinged and snap-locked lid. Fits large .45 cal bullets (e.g. .45 Colt/.454 Casull)
A Skadis Holder for three Wera 454 T-handle Hex-Plus screwdrivers. There are two pieces, the holder and the Skadis hook. After printning them, it is required to put them together. I use 5min epoxy glue. Infill (my recommendation): Holder…
After our dishwasher detergent door latch broke I looked to replace the latch, only to find that the part was only sold as a assembly... A $105 assembly.... So... 30 minutes of design and 30 minutes of printing later it was fixed, and if…
This is the 45x23 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
This model is compatible with the lego system.
After looking for corner brackets for 4545 profiles I saw that they had significant costs so I designed a model that could be printed both for testing and functional to be used for the creation of printer tables, shelves or simple…
Added an RMR plate to the slide that uses two M3 heatset inserts to securely mount an optic, rounded out the front portion under the slide, rounded the trigger guard, and sculpted the grip plates. Main goal was to improve ergo a bit and…
This is the 45x12 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
Bracket for generic 4545 extruded profiles like Bosch Rexroth (or printed profiles for less loaded applications)
Simple stand for a Salton Dh1454 Food Dehydrator to keep Filament above the Nozzle Plate, this was made quickly in Tinkercad. This utilizes an easy to obtain Pail(any Hardware Store) and this stand to dry your filament. I printed this one…
Osłona czujnika ABS (454779) do Peugeot 206, której w tej chwili nie ma zamienników i pozostaje tylko serwis, oczywiście o ile jest w ogóle dostępna + Do wytoczenia w dwóch wersjach model śruby mocującej czujnik ABS oraz tę osłonę o nr…
Self designed alternative cover substitution for BK21-V27454-FCW on the inside of sliding door of a Ford Transit Custom Prequisites: * Some welding glue (like UHU Plast Special) * Some more bit elastic glue (like UHU Plus 2 Component…
This is the 45x45 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
This model is compatible with the lego system.
Clip for weather/rubber trim on A-pillar for Seat Leon MK1 (1M) / Toledo
This part failed on me and the PCB/LEDs droped into the console so I couldnt see what gear I was in. Not a huge problem since the dashboard shows everything, but it irridated me and gave me a problem to fix with my printer. printed in…
Modelos compatibles con set legos
Chevrolet Chevelle SS 454 LS6 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
A simple funnel that fits on a regular jam jar to stop the jam from getting on the outside of the neck of the jar.
This is a front protection cover for my Tektronix (Tek) 454 oscilloscope. It has hooks at the left and right side which clip on the side of the scope to secure the cover. I quickly threw this together and printed a few tests for fitting.…
Insert M5 or M6 screw nut in to use it. M5 nut have a slim version, for special 4545 profiles. To work well, the nut is difficult to push in, a pliers can help.
Flachverbinder 60x40mm (Anlehnung an DIN EN 14545) – 6 versetzte Bohrungen Dieser 3D-druckbare Flachverbinder ist nach den Dimensionen der DIN EN 14545 für Holzverbinder konzipiert. Mit einer Grundfläche von 60x40mm und 6 versetzten…
On the original 454 Casull the barrel is clearly visible as a gold/brass color, so I wanted to replicate that in my print and this was the easiest way.
4545 profile M8 corner for simulation rig.
For the other side, mirror the model in the slicer.For the other side, mirror the model in the slicer. To install in the rail, simply insert and rotate it quarter turn. Use an extra t-Nut screw if you want, but no neccesary. Use a bit of…
I think two size is enough for cable management, a smaller and a bigger. To install in the rail, simply insert and rotate it quarter turn. Tight enough so it doesn't slide in the rail. Use a 5-6 perimeter layer thickness to make it strong.
re-render of modern interpretation of vintage 1890s patented by C.C.Packard leaf shutter, remixed from published on flickr blow-up diagram. Used image to 3d model on Makerworld with export to .stl Powered by MakerWorld-Image-to-3D (…
Warning: There are other Salton VitaPro food dehydrators that aren't the DH1454. This only works with the DH1454. It might not work with another Salton VitaPro food dehydrator. Do not use PLA for food dehydrators, they get too hot so the…
Táhlo ke splachovači WC, TE-4549/II-05, Slovarm 428916
This is a rather large tray for my Wera 454 HF hex wrenches. This model is sitting ontop of a large 4x7 gridfinity baseplate from @Stu142 . I added labels for the different sizes and there are also cutouts on the back, to make the labels…
I needed a fuel tank center cushion for my Suzuki ZR50 SL, so I borrowed a piece from a friend and made these model based on the factory part. I've printed it from Fiberlogy's FiberFlex 30D, and with the parameters given in the attached…
Cover for Nature's AirSponge Odor Abosorber, Small size has cover, but my big(454g/12 oz) size one don't has it They say the product can be used without a cover, but I was very concerned about the fact that I didn't have a cover, and I…
Diagonal Dimension : 1.39 inch Resolution : 454 × 454 pixel Display Color : - Touch Mode : None Module/Panel Dimension : 40.3 x 41.8 x 2.45 mm Viewing Area : 35.41 x 35.41 mm Supply Voltage : 3.3 V Luminance : 430 cd/m2 Interface : MIPI-1…
To install in the rail, simply insert and rotate it quarter turn. To print it easy, slice it to two pieces, and glue it.
Cable bracket for 4545 aluminium enclosure. Modeled according to the BOSCH Rexroth extrusion and cable bracket. The bracket twists inside the inner groove of the profile and holds in place firmly. I printed them in HyperPLA and they hold…
Diagonal Dimension : 1.39 inch Resolution : 454RGB x 454 pixel View Direction : All Touch Mode : Capacitive Module Dimension : 42H) x 42.6(W) x 2.227(D) mm Viewing Area :35.41 x 35.41 mm Supply Voltage : 3.3 V Interface : MIPI, SPI…
Diagonal Dimension : 1.4 inch Resolution : 454RGB x 454 pixel View Direction : All Touch Mode : None Module Dimension : 38.46(H) x 38.62(W) x 0.78(T) mm Viewing Area : 38.46 x 38.62 mm Supply Voltage : 4.6 V Interface : MIPI, SPI…
To install in the rail, simply insert and rotate it quarter turn, and push trough the HUB.
Miele Dunstabzugshaube Winkel Miele Kitchen Hood Bracket Part Nr. 8454000 Replacement bracket. The print part is not left/rigth symmetric. Mirror the stl or use the 3mf file. Use the suggested print position in the 3mf for strong part. I…
This is the 45x12 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
This is the 45x23 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
This is the 45x45 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
Insert M5 or M6 screw nut in to use it. M5 nut have a slim version, for special 4545 profiles. To work well, the nut is difficult to push in, a pliers can help.
To install in the rail, simply insert and rotate it quarter turn, and push trough the HUB.
To install in the rail, simply insert and rotate it quarter turn, and push trough the HUB.
To install in the rail, simply insert and rotate it quarter turn. To print it easy, slice it to two pieces, and glue it.
I think two size is enough for cable management, a smaller and a bigger. To install in the rail, simply insert and rotate it quarter turn. Tight enough so it doesn't slide in the rail. Use a 5-6 perimeter layer thickness to make it strong.
Modelos compatibles con set legos
Show your pride and upgrade your duty gear with the Motorola APX 6000 Radio Holster — Thin Blue/Red Line Edition . This is a lightweight, durable 3D-printed holster built to keep your radio secure and accessible—on patrol, at the range,…
Added an RMR plate to the slide that uses two M3 heatset inserts to securely mount an optic, rounded out the front portion under the slide, rounded the trigger guard, and sculpted the grip plates. Main goal was to improve ergo a bit and…
This is a cable clip for 45mm Alu extrusion (10mm slot). No tools or screws needed, just twist it in and secure your cable with a zip tie. No Supports needed (laying on its side). I made multiple sizes for different cables. Here you find…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
Model of the .454 Casull cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
Gridfinity tray for the WERA HF 454 T-Grip 200mm
Please use ABS with 5-6 perimeters or ASA. My original PETG model with 6 perimeters and 75% infill warped after use on the 70 Celsius degree program. Print laying down and slow down to 50-60mm/s for the whole body and raise temps to…
Keep your RIDGID Threading Machine (Steel Dragon Tools 44545) running smoothly. Our custom-made, 3D printed brush cap is a cost-effective and reliable solution for worn or missing original parts. (Steel Dragon Tools 44545 Plastic Brush…
ORGANIZZATORE GT454 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
Holds the spool, the key prints separately so you don't need a bunch of support material.
To install in the rail, simply insert and rotate it quarter turn, and push trough the HUB.
This model is compatible with the lego system.
The claw of the LEGO duplo crane broke and I needed a replacemant part. It should be of the same dimensions as the original part and it works fine for us at the moment.
Show your pride and upgrade your duty gear with the Motorola APX 6000 Radio Holster — Thin Blue/Red Line Edition . This is a lightweight, durable 3D-printed holster built to keep your radio secure and accessible—on patrol, at the range,…
This is a cable clip for 45mm Alu extrusion (10mm slot). No tools or screws needed, just twist it in and secure your cable with a zip tie. No Supports needed (laying on its side). I made multiple sizes for different cables. Here you find…
This is a replacement for the cap that goes on top of the front forks of a Kawasaki EN450/454LTD motorcycle to cover the Schrader valve. I have yet to figure out how to create accurate threads in any CAD program (or any threads for that…
This model is compatible with the lego system.
The original part broke at the connection to the trailer. This is a full replacement. Not really suited for an FDM printer in terms of durability but works good with an SLA printer for example. Update 2023-03-06: increased thickness at…
Diagonal Dimension : 1.4 inch Resolution : 454RGB x 454 pixel View Direction : Top: 85, Bottom: 85; Left/Right: 85 Touch Mode : None Module Dimension : 38.83H) x 38.21(W) x 0.68(D) mm Viewing Area :35.412 x 35.412 mm Supply Voltage : 4.6…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
Note: The cartridges will be very loose in the box because of the clearance for the rim. Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches…
The original part was lost somewhere. This is a full replacement. Printing: Layer height: 0.12mm Infill: 100% Supports: on build plate only Orientation: same as STL The one in the image was printed with transparent PolyLite PETG.
.454 Casull stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
.454 Casull Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your regular…
Pics: 1 - original (broken) 2 - part right after printing 3 - part after postprocessing with deburring tool Print instructions: 0,1 mm layer height to get it as round as possible, 5 Perimeters so you end up with a solid part. OF COURSE…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
