P
PrintablesKai Gloystein
MERCEDES-W124-500E Silhouette
MERCEDES-W124-500E Silhouette
- Pobrania
- 639
- Polubienia
- 70
- Ocena
- 5
Wyniki wyszukiwania: 500e
Liczymy pasujące modele…
P
PrintablesLuc ldx
YARDFORCE SA500ECO wheel
This wheel give to the YARDFORCE robot mower the capacity to clim slopes of 45° Print instructions big print, more then 24 h, I needed to place a cooler on the extruder motor , important no support for printing I used ngen orange 1.75 mm
- Pobrania
- 370
- Polubienia
- 9
- Ocena
- 0
P
PrintablesSHR3D.eu
SUZUKI key fob (optional GS 500E)
[ENG] A simple keyring with SUZUKI logo designed for three-colour printing in layers using a manual filament change (e.g. with the M600 command). It is also possible to have the name of the motorcycle inserted from the back. Therefore,…
- Pobrania
- 294
- Polubienia
- 20
- Ocena
- 5
P
PrintablesTimo
Fiat 500e Key case
So that the small key from the Fiat 500e can be hung on the keychain
- Pobrania
- 273
- Polubienia
- 12
- Ocena
- 4,5
P
PrintablesDZC
Speaker adapter for fiat 500e
In a Fiat 500e the original speakers are rubbish! Here is an adapter that allows the mounting of 165mm speakers (Focal for me ;) ) The orientation of the original speaker is preserved, a cable passage is provided. ---- Dans une fiat 500e…
- Pobrania
- 248
- Polubienia
- 16
- Ocena
- 0
P
Printablesopl1
Suzuki GS500E Front Fender
Suzuki GS500 (E) Front Fender. Modeled this for my cafe racer-esque bike. Tested to work with a 1996 model. It is designed in a way where you do not need to remove any parts to install it. it uses the stock mounting holes. I used black…
- Pobrania
- 161
- Polubienia
- 14
- Ocena
- 0
P
PrintablesRayfor
Hasselblad 500EL/M to manual convertor kit
Convert your hasselblad 500el/500elm to manual camera need M2*6 extra screw Category: Camera
- Pobrania
- 110
- Polubienia
- 14
- Ocena
- 0
P
Printablesnagromnewo
Motorola XPR 3500e KnobGuard
This model guards the knobs on a Motorola XPR 3500e so the volume and channel aren't accidentally changed. I finally got fed up with the volume and channel settings of the radio being changed by rubbing against my clothes as I walked…
- Pobrania
- 101
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFeldking
Backrest Rückenlehne Decathlon Cargobike R500E Longtail Lastenrad
(EN) Backrest for the R500e cargo bike. This makes the little one sit much more comfortably. Can also be used to secure loads, as the bar can be freely adjusted and attached. The aluminum tube has a diameter of 25mm and could be purchased…
- Pobrania
- 83
- Polubienia
- 14
- Ocena
- 5
P
Printablesduellmp
Fiat 500e Key pebble frame
Fiat 500e Key pebble frame, use 6 perimeter or 100% infill. After print slide the pebble in like the pictures 4 and 5, one firm press and the pebble pops in.
- Pobrania
- 75
- Polubienia
- 5
- Ocena
- 5
P
PrintablesHelmut Steinberger
Fiat 500e key enclosure
The Fiat 500e has a key, which is sealed to be waterproof. Downside is, that it is not possible to exchange the battery, at least without destroying the shell. After you manage to get the electronics part out of the shelle and exchange…
- Pobrania
- 71
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKeepy
ESP8266 with W5500E case
Printed using eSun PLA+ black and Generic PLA Orange
- Pobrania
- 70
- Polubienia
- 13
- Ocena
- 0
P
PrintablesRayfor
Hasselblad 500EL/M 500ELX 553ELX 9V Battery Conversion
Use 9V block battery to drive hasselblad el series. Need two M3 screw and a battery cable to work with. DO NOT USE CHEAP BATTERY. It takes high current to drive film back. Cheap batteries could work with the body itself but will not…
- Pobrania
- 70
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRayfor
Hasselblad 500EL/M 500ELX 553ELX Battery door latch/lock
Exactly the same size as original ones. Can work with orignal parts Print with MJF or SLS need a M2*12 GB119 PIN and a Ultra thin spacer. You can cut a toothstick and a piece of film instead. Category: Camera
- Pobrania
- 59
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFrantisek Mrazek
Segway Navimow H1500E Blade Disc
Blade disc for Segway Navimow H1500E that has 6 blades instead of the original 3.
- Pobrania
- 47
- Polubienia
- 1
- Ocena
- 0
P
Printables3DJupp
Fiat 500e (new 500e/2021) Key, Card and Coin/Token holder
Remix of the model i found from FM93. Designed it to hold only two coins or tokens, but additional cards. Since this is designed for a electrical vehicle, you might use it to store cards to charge your car (EnBW/ADAC, ladenetz (in…
- Pobrania
- 38
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJ3ffSolo
Coque arrière clé Fiat 500 / 500e 2022
J'ai modélisé cette partie de la clé pour Fiat 500e (convient à d'autres modèles je pense) car sur la mienne les pattes étaient cassées.
- Pobrania
- 33
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGuillaume
Chainring Guard for Riverside 500E (Decathlon)
The original chainring guard on my Riverside 500E (Decathlon) cracked after normal use — and I quickly discovered that no spare part was available , either through Decathlon or third-party suppliers. Rather than leaving the chainring…
- Pobrania
- 31
- Polubienia
- 12
- Ocena
- 0
P
Printablesmt.brun
Front reflector holder Decathlon R500elec
Photos description : print the model (Petg) clip the reflector ont the 3d print and pass through holes twoTy-rap collars chose a basket bar to attach it Find my watch holder for the Decathlon cargo bike R500elec here :…
- Pobrania
- 26
- Polubienia
- 7
- Ocena
- 5
P
PrintablesZiggornif
Carter plateau Decathlon Riverside 500E
Print settings : Filament : ABS Infill : 20% Walls : 4 Resolution : 0.20mm Supports : No Post print : Add 4x M3 6mm (height) *5mm (diameter) heat-set inserts in holes.
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJoão Amaral
Simple adapter to tighten GS500e damper rod
To assemble the forks, you need a tool to hold the damper rod and torque the damper rod bolt. I used this in a Suzuki GS500e but you can use it in any motorcycle that has a 24mm damper rod. Before using, insert the tool in the damper rod…
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAbeFM
Fiat 500e Charger Ceiling Mount
I couldn't find a good place for my charger, so I mounted it on the ceiling. I imagine you could mount it on a wall with this. Flip part, print without supports. Break off the support for the retention tab (see picture, rectangle that…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
Printablesbernieke
Royal Enfield Bullet 500ES 2004 replacement tail light cover
I broke the tail light cover of my motorcycle, and couldn't find a replacement. So I designed one myself, and printed it from red Taulman t-glase PETT . I used 0.30mm layers. Regular transparent PETG works as well, but the Taulman results…
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAntoine Dalmières
Cockpit pour decathlon riverside 500e
C'est un support pour un vieux honor 8 et qui se monte sur un vélo décathlon riverside 500e. Vous avez besoin de 12 vis M3 CHC assez courtes et donc 12 inserts M3 6 vis courtes pour le couvercle (6mm) 6 vis un peu plus longues pour les…
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
Printablespeterviszt
Custom server case for Lenovo 500e Chromebook
Found a pretty banged up Lenovo 500e 1st gen Chromebook on marketplace for basically free, took it apart and made a new 3d printed case for it and using it as a Home Assistant server. I have an A1 mini printer, so the case is split into 2…
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
Printablesz.B. Max Mustermann
Fiat 500e secondary keyfob replacement case
Notice: I had to put some tinfoil under the replaced battery to make the contact work The pebble key (or "Steinschlüssel" in German) of the Fiat 500e has a non-replaceable battery. When after 2-3 years the battery runs out, Fiat wants you…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBenoitC
Decathlon R500e V2 to V3 front rack light mount
This is an adapter for the mounting of the Version 2 lighthammer 80 light to the mounts on the V3 front rack. (Mount it on the wheel itself creates bumping of the rack on the light itself. Mounting on the sides by two #8 x 1-1/4"…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAntos
FIAT 500e wearable key case
New case if you have managed to remove the electronic key successfully from its sealed housing and inserted a new battery. You can use a heatgun. But but be carefull and aware not to destroy the electronics inside. Start at the battery…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Mercedes-benz 500E Body kit Hot wheel
Mercedes-benz 500E Body kit Hot wheel includes front and rear lip you need some super glue and some sand paper where your gluing
P
Printables
Fiat 500e key enclosure
The Fiat 500e has a key, which is sealed to be waterproof. Downside is, that it is not possible to exchange the battery, at least without destroying the shell. After you manage to get the electronics part out of the shelle and exchange…
P
Printables
Decathlon cargo bike R500e chain tensioner
The chain tensioner of R500e version 1 cargo ebike is a bad joke. Mine was not bearable anymore, but the order of the replacement part took quite a long time. So I made a replacement part that mimics the new version of this part. It uses…
P
Printables
Fiat 500e Replacement Pebble Key
Fiat 500e “Pebble Key” Replacement Housing Splash-resistant replacement shell for the Fiat 500e pebble key. Features OEM-inspired looks, secure screw closure with 40mm silicone lid, and an upgraded, replaceable CR3032 battery compartment.…
P
Printables
Fiat 500e Bag Hook
A holder for a Bag/Purse for the Fiat 500e. Print Instructions (English) Layer Height: 0.2 mm Infill: 25% (Gyroid or Grid recommended) Perimeters: min 3 Supports: Optional – build plate only Material: PETG / ASA / ABS (heat-resistant…
P
Printables
Mercedes-benz 500E Body kit Hot wheel
Mercedes-benz 500E Body kit Hot wheel includes front and rear lip you need some super glue and some sand paper where your gluing
P
Printables
Watch holder for Decathlon cargo bike R500elec
My Decathlon R500elec cargo bike was missing one thing to arrive to school on time… a watch on the handlebar. I decided to put the basic Decathlon Kalenji W200 S watch (hour, alarm, countdown and chronometer to beat records) on the bike.…
P
Printables
Toto Bidet Mount Bracket S550e/S500e
Used for a s550e that had a missing bracket when it arrived. You can use fusion to adjust it for your toilet. I printed mine in petg 100% infill. Seems sturdy, can really crank it down.
P
Printables
Fiat 500e wearable key for Iclip
Fiat 500e wearablekey card sized holder for Iclip walett I add the Gcode *vase mode printed PETG
P
Printables
FIAT 500e case for wearable key aka "le Galet"
FIAT 500e case for wearable key aka "le Galet" Provide 2x M3x10mm countersunk head screws and a 3x40mm O-ring Print in PLA or PETG. Version with or without writing but with beautiful colors :) ---- Étui pour clé portable FIAT 500e alias…
P
Printables
Fiat 500e key enclosure smaller version
Remixed version of Fiat 500e key enclosure by Helmut Steinberger