Liczymy pasujące modele…
Revision 3 of my BTT TFT50v2 Case. You'll need to cut/desolder the white marlin connector on the TFT50v2 to use this case. Snug fit 4 Back versions, pick your poison! 2 Front versions. Step file included. The back designs include: VzBot…
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
This bracket was designed for mounting my GL.iNet X750V2 router in my electric cupboard in a camper van. Two versions exist currently: No mounting holes With mounting holes designed for No.2 (2.2mm) Self Tapping Countersunk Screws.…
Terminal Cover for the Victron Smartsolar/Bluesolar MPPT. Tested on 150/70 -Tr VE.Can. Should fit on all similar units from 150V to 250V. No supports needed.
BASIC MODEL: KCD3 T105 85 16A 250V AC SWITCH
universal mount for fettec absorber and the 50V capacitor for use with cable ties https://fettec.net/shop/fettec-spike-absorber https://fettec.net/shop/kondensator printed in tpu 0.2 layer without supports I would be happy if you leave a…
FIVE33 Switchback - TPU capacitor holder 470 uF / 50V
This print requires some M3 heat-set inserts with 5mm OD and around 3.6mm height. The hole pattern on the back is 32x32mm M3. The hinge is modeled mainly as an afterthought, it's not very sturdy. Source f3z file is attached for easier…
Other part files can be found on the original model page: https://www.printables.com/model/256335-atx-benchtop-power-supply-0-30v-remix-fusion-360 The twin USB ports are connected to the 5V standby rail so are always powered Parts list:…
Power strip EPS-503W-2 250v 10a mount. As you can see the power strip itself is not that standard-shaped, but i have managed to design and create a mount for it = 3DPRINTING RULEZ!!!!111oneoneone Print instructions Print can be done…
this is a mockup of the Power Power Supply Modul DP50V5, DP30V5A, DP20V2A for further 3D constructions. it was not designed to be printed!
It clamps onto the bed of the lathe and screws onto the tab on the back of a dial indicator. The back of the indicator plunger fouls the headstock when the carriage is close to it but with a 25mm indicator, it only reduces the carriage…
I built this since I didn't have the money to buy a normal camera cage. It uses a ¼-20"¾ and ¼-20"5/8 screws to go in¼-20"¾ and ¼-20"5/8 screws to fasten to the side and bottom of the camera. Along with 3 m3x18mm screws to mount the side…
The WM250V metric comes with a 48 tooth gear on the threading dial. Changing this to a 30 tooth gear adds the ability for the threading dial to be used with 1.25mm and 2.5mm thread pitches without taking any away. I used it for a 1.25mm…
I use range outlets in the garage for all my 250V tools, welders, plasma cutter, even shop compressor... I do this because it's one of the least expensive options, and because having range plugs on my welders gives me alternative places…
Customized version of http://www.thingiverse.com/thing:1264391 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1264391 Instructions Using the following options: PCBPosY = 6 PCBPosX = 7 Width = 180 Police =…
I made this portable box to feed rail relays; The box uses a step_up modulator powered by a 4.2V 18650 lithium battery; the voltage is adjustable by potentiometer, in output up to 50Vcc; there is a button to check the output voltage on…
Two options: Floorplate: make it in copper/alum 3mm sheet Drill holes: make it in plastic and screw to the box, and use it as a template for drilling
Designed this to hold 2 2200uf 50v capacitors. Originally made for mounts 2 x capacitors onto my snow blower. Used to stop the lights from flickering and prolong they're life
Customized version of http://www.thingiverse.com/thing:1264391 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1264391 Instructions Using the following options: FPanel = 1 PCBWidth = 50 TxtSize = 3 BPanel…
Needed a plate to mount Europeen style power socket to a North American electrical box, this is what I came up with. here is a link to the same style of power outlet I used:…
This is a drag friendly remix of my original housing. Instead of a clamp with two screws performing strain relief, this one has no separate clamp, nor does it require the two additional screws and nuts. Strain relief is now intended to be…
Customized version of http://www.thingiverse.com/thing:1264391 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1264391 Instructions Using the following options: txt = Length = 180 BPanel = 0 BShell = 1…
Customized version of http://www.thingiverse.com/thing:1264391 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1264391 Instructions Using the following options: FootDia = 8 FootHeight = 10 Width = 180…
Halterung für Aideepen DC 50V 5A 250W Digital LCD Voltmeter Ammeter/Powermeter https://www.alibaba.com/product-detail/Aideepen-DC-50V-5A-250W-Digital_1600587970085.html for fitting into top viewed battery department - for devices that are…
I upgraded the PSU with an additional boost converter to support higher voltages. Now the PSU is variable from 0-50V @100W instead of the previous max. 0-20V the USB-C PD standard supports. Changes: The connection plug needed to be moved…
LaskaKit 8-kanálový SSR Relé modul I2C 250VAC 2A 3D model vývojového kitu LaskaKit 8-kanálový SSR Relé modul I2C 250VAC 2A Stránka produktu: https://www.laskakit.cz/laskakit-8-kanalovy-ssr-rele-modul-i2c-250vac-2a/ Github:…
A simple side mount for a Panasonic EEU-FR1H102 (1000 µF 50V ⌀16 mm/26+ mm) capacitor (27mm long; 16mm diag.). Print with TPU.
For cooling, I recommend a 24v 30mm fan wired directly into the back of the ZY12PD. I used a yrd3010 because it came off of my nightmare Monoprice delta pro and i wanted to use it on something (and it has a super low stall voltage too! it…
Mein erstes Modell :) Ich brauchte einen Halter für das Kinderbett meiner Tochter, dieser sollte die Nuk Eco 550VD tragen. So können wir jetzt schön unserem Kind beim Schlafen zusehen. Innenabmessung 17mm Lochabstand 44mm
A hardware modification for the Dell Axim X50 and X50v , combining USB-C charging with a redesigned battery cover. The cover is designed for resin 3D printing and integrates a snap-fit enclosure for the USB-C module while retaining the…
The only changes from the original model are the flatter and shorter feet to make the power supply horizontal. Category: Electronics
An enclosure for the LaskaKit 0-50V 4A EMI Filter . Made to be printed using certified self-extinguishing filament, such as this one or this one . Printing it out of such material allows it to be used in industrial applications or in…
LG Flatron E2250V 22' Hi this is the stand for my monitor, i get it one for free but it was missing the base, so i need to make one itself. I know that 0.5€ look radiculus but I am a student :) I spend some time in Fusion 360 Made a few…
A simple side mount for a Panasonic EEU-FR1H102 (1000 µF 50V ⌀16 mm/26+ mm) capacitor (27mm long; 16mm diag.). Print with TPU.
Two options: Floorplate: make it in copper/alum 3mm sheet Drill holes: make it in plastic and screw to the box, and use it as a template for drilling
Done quickly in tinkercad. Works, but could do with being designed from scratch in CAD.
Mon anglais est déplorable, alors plutôt que d'infliger une torture linguistique à nos amis anglophones, je m'exprimerai en français. Mille excuses. Profitant d'une promo sur Banggood pour cet article : DPS5015 (…
This is my take of a DP50V5A lab bench power supply. The DP50V5A power supply controller: https://www.aliexpress.com/item/33013863500.html The switching power supply: https://www.aliexpress.com/item/33031342659.html The main reason for…
Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 491996 (High power version, from the Festool Router OF1440, since the grinder can draw 13 amps) two #6-32 x ½'' machine screws To…
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
