fifine K683A Microphone Stand
The plastic bolt was clipped on the original stand adapter, can be taken off by force. https://fifinemicrophone.com/products/fifine-k683a-type-c-usb-microphone
- Pobrania
- 302
- Polubienia
- 27
- Ocena
- 5
Liczymy pasujące modele…
The plastic bolt was clipped on the original stand adapter, can be taken off by force. https://fifinemicrophone.com/products/fifine-k683a-type-c-usb-microphone
I designed the assembly around the MT6835 encoder and a ball bearing with a 22 mm outer diameter and 8 mm inner diameter. Printing Print 56t-40mm-motor-mount in PETG, ASA, or another heat-resistant material , using supports. Print all…
An attachment angle for my car broke so I created a replacement in CAD. For the unlikely case that anyone is searching for a replacement of this part, I put it here. It's the part that connects the center console panel to the tunnel…
I recently replaced my old, former USB charger which was mounted under a desk with the new Anker Prime GaN Charger with 200W. Therefor I created two brackets to mount this charger under a desk with 2 screws each. There are two versions of…
This model is compatible with the lego system.
A holder for a ANENG 683 smart multimeter with holders for the test leads. Print suggestion: 0.20 to 0.28mm layer height 15% fill
Printed without supports. Consider printing in PETG or something heat resistant since the unit gets hot under full load
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
This model is compatible with the lego system.
I have not found any mounting solution for this charger that I liked so I created my own. It should be assembled before charger is inserted. There is a gap between holder and the surface where it is mounted to. This way the TPU part will…
This inserts should be use with Rugged Box Parametric V2 model made by @Whity Rugged Box Parametric V2 parameters: InnerBoxDepth 160.4 mm (or 160.2 mm if you printer has hight accuracy) InnerBoxWidth 160.4 mm (or 160.2 mm if you printer…
A simple, stand for displaying your LEGO F1 car (set 30683). Compact, stable, and easy to print.
My variant of Volvo's fuel line clip 8683718. I lengthened the inner part by a total of 1 mm for a better grip on the screws, since over time the screws rusts and the clip sits worse. Print Settings Printer Brand: Tronxy Printer: X5SA…
Wall mount for Anker Prime Charger 200w 6 ports GaN, model number "A2683", has two holes for screws and space for tape. Great charger, now more organized! Print shown on the pictures was performed in PLA, 0.8mm nozzle with 0.48mm layer…
This is printable F683ZZ for Rev 2 EX BCAR by Epicxxxx https://www.printables.com/model/781291-rev-2-ex-bcar This is not 1:1 F683ZZ and it's made specifically for that BCAR. I tested it with centauri carbon on 8.5 BCAR. Print it with 0.16…
A simple holder for the MT6835 magnetic encoder designed to work seamlessly with 42BLF BLDC motors (motors with a 42mm flange size). The bolt circle diameter for the installation on the 42BLF motor is 32mm Details here :…
This is a custom-designed replacement knob for KitchenAid toasters 5KTT780 part 4176838 . The model is designed for durability and precise fit and has been optimized for 3D printing in polycarbonate (PC) . It is intended as a functional…
[DE Text: Siehe unten] This is a replacement head release knob for the Philips Philishave 6382. The original one has a click-mechanism to keep the knob in place. i was not able to replicate that with sufficient detail and sturdynedd.…
Bracket/holder to mount your Aneng 683 Pro Multimeter (in its case) on your Skadis board. Uses the very excellent t-clip system by Line Arc Line (from here ) - you'll need two of the t-clips depending on your style of Skadis board…
Extended XT60 PSU Cover with some more space for wiring and vents added for cooling to match PSU vents (S-600-24). Added option for click in switched/fused AC socket (or can cut out angled corner in slicer or with side cutters to go with…
This model allows for the mounting of the Bticino 346833 module on a DIN rail, available in both "horizontal" and "vertical" orientations. The 3D-printable design can be easily printed in PLA without issues. The vertical version requires…
I wanted to have a GaN charger for my Surface when I have it docked at my new toolbox, decided to whip up this simple mount that uses neodymium magnets to secure the charger to the side of the box. The magnets I used were “Master Magnet”…
Printed with 0.2mm layer height and support.
I printed in PETG at 0.08 mm layer height, but I think it would work fine in PLA or other resins, too. The small layer height helps keep the threads smoother.
Was looking for a bracket for my Anker charger, couldn't find one so decided to have a go! V2: Added a version for mounting vertical as well as the original horizontal mounting. Also added additional vent holes Increased the lip to retain…
Presento el PEGOT-E (73468-V3) , mi proyecto de robot social interactivo. Diseñado íntegramente en SketchUp y fabricado mediante impresión 3D , este robot combina hardware accesible con un comportamiento dinámico y autónomo. Su estructura…
Rostock Max v1 (Indiegogo acrylic). A piece made from acrylic broke when it was over-tightened. This is a printable version in-case anyone else does the same thing. I ended up not using this piece because the acrylic parts were strong…
sorta inconsistent but works ig :3 have fun!
Overview Clean, purpose-built Gridfinity-compatible holder for the Harbor Freight High Strength Super Glue 10 Pack 68345. Keeps tubes upright, visible, and easy to grab—no more digging through drawers or crushed packaging. Designed for…
Could not find a good gridfinity holder for the Mitutoyo 543-683B digital indicator. I needed something that was deep and could hold other bins on top. Printed with Polymaker wine red pla, 2 walls and 10% infill.
Prined in PETG in vertical position (Unger thread facing up). No supports used. Be aware of the overhangs of the thread in terms of printing temperature and cooling. I used gemini to create an openSCAD script for the konical thread.…
I designed the assembly around the MT6835 encoder and a ball bearing with a 22 mm outer diameter and 8 mm inner diameter. Printing Print 56t-40mm-motor-mount in PETG, ASA, or another heat-resistant material , using supports. Print all…
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
This is a custom-designed replacement knob for KitchenAid toasters 5KTT780 part 4176838 . The model is designed for durability and precise fit and has been optimized for 3D printing in polycarbonate (PC) . It is intended as a functional…
Was looking for a bracket for my Anker charger, couldn't find one so decided to have a go! V2: Added a version for mounting vertical as well as the original horizontal mounting. Also added additional vent holes Increased the lip to retain…
Presento el PEGOT-E (73468-V3) , mi proyecto de robot social interactivo. Diseñado íntegramente en SketchUp y fabricado mediante impresión 3D , este robot combina hardware accesible con un comportamiento dinámico y autónomo. Su estructura…