Liczymy pasujące modele…
The IO Shield that comes with the X470D4U motherboard does not fit the SuperMicro SC512 series chassis. This solves that problem. This was modelled with a SC512F-350B chassis. Print instructions You may need to slightly shave with a sharp…
Printed at 0.20mm Standard layer height with 2 walls and 5 base layers to strengthen the bottom.
Poignée grip pour Canon EOS 90D ( va aussi pour le 70D et 80D) ajoute 16mm de haut se qui permet de mieux tenir l'appareil photo en main. j'ai Integer le plateaux Manfrotto 200pl faut changer la vis par une de 17mm…
As i constantly have a blurry viewfinder image because the diopter adjustment is misadjusted by my hands, my camera-bag etc. i needed something to prevent this annoying situation. Fits EOS 70d for sure, other models have to be tested. So…
Mise à jour du 15/10/2024: Ajout de 2 profils pour la XL 5T et la MK4. vous pouvez augmenter la vitesse de 130% sur l'écran LCD de l'imprimante ( au niveau des réglages.…
A modified version of the 270deg hinges to fit the holes from the enclosure/panels from CN3D from Nadir. BOM qty description URL * 16 m3 heatset inserts(length does not matter) AliExpress / Amazon 16 m3x6 AliExpress / Amazon 8 m3x10…
3D printed holders for Yaesu FT-70D, Radioddity GD-77, and Yaesu VX-5R HAM radios There are multiple versions of the Yaesu FT-70D holder, one with a larger base (feet). I first designed these using Moment of Inspiration, then I redesigned…
A remixed IO Shield of Petr Sedlář's A2SDi for SC505 Chassis IO Shield , but instead made to be compatible with the AsRock Rack X570D4I-2T motherboard. The STL is extremely dirty, but I'll clean it up once I have the time for that. Bambu…
A small sleeve to protect and support the SMA to BNC adapter for the antenna on the Yaesu FT-70D transciever. Printed with a 0.2mm nozzle in mind, might be possible with a 0.4 mm nozzle as well, i have not tested it. You might want to add…
Due to the low screen brightness of these models I designed a sunvisor for it. The visor can be fastened with screws on the back. This design will barely fit a 250 x 210 mm build plate, which is suitable for the MK4, likely the MK3…
Printed on Bambu A1 without supports. Includes little indents for the slightly raised threads on the body. Doesn't interfere with the lanyard holes and battery is removable still.
This replaces the tray extension which the hinge broke off (it's easy to break). It costs almost half of brand new printer to replace, so I figured I just print one myself. You have to wiggle quite a bit to insert and deploy, but it works…
The Yeasu M-70D desk microphone is high quality and represents spoken audio well for Amateur Radio, but it is too short and requires leaning over in an unnatual way to use it. This model is an exact copy of the stock support post but it…
EDIT: If needed, please adjust the scale of the model by 10x, i.e. add a 0 to the scaling. Incorrect units on export. Use this print spacer to print 3X5 index cards from your brother laser printer note: the revision2 has a relief to…
Print settings: 100% Concentric Infill A simple IO back plate for the AsRock Rack X570D4I-2T motherboard that is compatible with 1U servers that do not use standard back plate retainers such as the In-Win IW-RF100S-S265. This design is…
A straightforward I/O shield for the ASRock Rack X570D4U motherboard based Dante's ATX IO-Shield blank. Dimensions match the board’s rear I/O layout, and the part seats securely once installed. In the Inter-Tech 4U‑4424 chassis the fit is…
I made a door hing that fits the SV08 and allows the glass doors to open 270deg. BOM 4 - M4x12 CH for hinge pin from top only 8 - M3x12 CH for glass (reuse plastic gromet) 8 - M3x10 FH or slightly longer 1 - M3 drill & tap Installation…
This YAESU FT-70 radio mount fits to a bicycle handlebar with a diameter of about 21-23mm. You need: 8x M3x18mm Screws 8x M3 Square Nuts The square nuts are placed in the back-left/back-right parts, you need to pause your print at 8mm…
