Liczymy pasujące modele…
This is just an alteration of an existing can dispenser, in order to make it fit the standard 375ml Coca-Cola can in AUS. I also adjusted the size and length of the ramps to give the can enough clearance to fit under the top shelf. Update…
This is just a quick remix of https://www.thingiverse.com/thing:4923778 to hopefully fit 375ml cans. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.20 Infill: 15% Filament: esun PLA+ black…
This is a collection of travel bottles, with following variations: shampoo (100ml) conditioner (100ml) shower gel (100ml) blank (100ml) blank (75ml) blank (50ml) blank (25ml) You can choose a variation from the different plates in the…
Remix of @mhparsons Beverage Can Dispenser to fit Australia 375ml cans. Comes with a common front section and a choice of 5 or 6 can back section.
Side loading bottle cage for 375 mL cans. Perfect for a mid-ride beer. Need a bottle cage in different size? Check out my parameterised version here! Category: Sport & Outdoors
This is a multi adapter to hold various sizes of glass bottles in your Yeti Colster Insulatied Can Cooler. Simply slip over the top of the glass bottle, it flexes to size and then rotate into place. I found it fits most long neck bottles,…
Remix of Mupshots Yeti Lid, resized to suit Australian Coopers Ale 375ml Bottles.
My sis like to use this bottle in school, but the original polypropylene cap is fragile. The result is a thousand of unusable capless not broken bottles in our kitchen. But now i have a 3d printer and some basic CAD skills. She wanted…
This is a “spillproof” container intended to hold cutting fluid, lubricant, or anything else that's applied with a brush. To use, fill with a liquid of your choice up to the fill line inside and screw on the lid. No more than a little…
Loved the design of the original. Discovered that my refrigerator could accommodate a third layer, so I tacked on some risers, then made a second copy, sliced in half.
I created this simple model as I accidently threw away the one that came with my cooler. This is a quick print and just spaces your can up a few mm for a tighter seal Place tapered side downwards
3D Gloop Bottle Holder for the 175ml Size for the Honeycomb Storage Wall Print Settings Printer Used: Ender - 3 Neo Rafts: No Supports: No 0.20mm Infill: 10% Support Cubic Filament: Polymaker Polylite PLA (Black)
This is a simple Fusion designed model to hold -10 large acrylic tubes of 75ml / 34mm Cap diameter. I printed at 0.25 Layer height as I didn't care for the fine detail. Lower it if you like smooth edges.
I have a 12v fridge in my car and when I put cans in there they always rolled around. I designed this can holder to suits 375ml cans Australian cans. It measures at 210L x 165W. The can holes are 67mm and have a 1mm clearance to allow for…
A bracket to hold a 75mL bottle of PLA Gloop
I took @CantiL_523775 model and added the hex piece that slots into the HSW.
0.2mm layer height, concentric top/bottom surface patterns for best appearance. Make sure to orient the disc correctly, one side is flush, the other is recessed. STL should load correctly, but just be sure to check before printing a ball…
Makes no difference what you make it out of I reckon. Did it in PLA at 0.2 on MK4S and needs no brim etc. Not as good as the Yeti but at a couple of bucks what is not to like?
Print at 0.3mm layer height, 15% infill, no brim, use glue if necessary
4x4 and off road culture is BIG here in Australia. Personally, nothing beats the feeling of finding that perfect scenic camping spot in the middle of nowhere, setting up, and having a cold one while watching the sunset. In reality, it's…
