Liczymy pasujące modele…
I broke my sunglasses and I wanted to order a new frame, because the glasses itself had some diopter, but unfortanely mr.spex doesnt sell them anymore... So I tried my best and made a model. Its for use with the Polaroid PLD D343 807…
If you have lost headlight washer covers of your Peugeot 807, you can print them. :o)
VW 807688/c - VW Center Armrest Repair Latch Clip Ersatzgriff für Armlehne diverser Modelle aus dem VW Konzern (VW Golf IV; Skoda Fabia,...). For printing rotate the two clips 90° to position them flat on printbed. 2020-05-29: New version…
sparepart spacer if you lost your Shimano crank spacers. nothing special
I sat on my glasses -yet again- and, since the temples (or legs?) survived, I decided to make a 3d model of the frame and print it, so I don't need to buy new ones! (the glasses cost 160€ new, but it only cost 19 cents to print them!)…
This model is compatible with the lego system.
STL file with English descriptions. Untested atm.
This model is compatible with the lego system.
This model is compatible with the lego system.
I scanned an rs6 bumper deflector and i printed it. it's not 100% the same as original and may require some work but it prints out. I own a prusa mk3s+ but the software did not see the scan so i printed with Bambu Lab. In the second…
443 807 300 Audi C4 front ABS cable expanding nut Gcode for 4pcs with custom supports (2 are needed for each side).
Motorcycle disk lock holder for ABUS 8077. Bolts to a 23mm diameter tube (Frame/crash bars/...) Adding rubber sheet or leather around the bar prevents slippage & prevents damage. The original inventor file can be used to adjust the…
This is the first model I've created. It was designed in Shapr3D. It was printed on an MK4S. The small divider can completely replace the original divider provided by Klein. I print mine at .2mm using the .4mm high flow nozzle. I print…
This model is compatible with the lego system.
Dishwasher spare part 807035801 8070358018 Mounting Holder Bearing Headboard for Spray Arm For: AEG, ZANUSSI, ELECTROLUX, WHIRLPOO
Hook for luggage compartment Citroen C8, Peugeot 807, Fiat Ulyse Háček do zavazadlového prostoru Citroen C8, Peugeot 807, Fiat Ulyse Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: YES Resolution: 0.2…
This is an updated version of a hopper with bellow. The initial model works fine, however when switching from pour over to espresso a bellow will be helpful to clear the left over fines. The hopper bellow and base are based on my Ceado…
Peugeot 807 / LANCIA Phedra / Citroen C8 / FIAT Ulysse - Sliding door rubber stopper
Work in progress... I lost the different versions of the freecad file, I'm designing a new one. Category: Automotive
Top cover and hopper for Ditting 807 LS. This is the first version. Meant to reduce the height of the Ditting 807 lab sweet, should fit all 807 models. (The current version of the cover does not include the switch activation at the back.…
Refillable filter cartridge with activated carbon for CleanAir CA-807 model. Print instructions Additional parts 4x Screws M2, DIN 562 4x Squared Nuts M2, DIN 7991 (4 mm height) Activated carbon Slicing Printed with Layer 0.2 The filter…
mužete nalepit oboustrannou lepící páskou na obyčejný stěrač.
Milwaukee 6225, 6226, 6230, 6232-20,6232-21,6230N,6232-6,6232-6N,6236, 6236N,6238N,6238,6238-21, 6238-20,2729-22 ,2729-20, 2729-21 DeWalt DW328, DW328K, DW 329, DW329K, and D28770 type 1. Porter Cable Porta-Band 725, 726, 736, 7723, 7724,…
Update: Added parts for 2kg spools. -"spoolholder_center_2kg" -"spoolholder_tube_2kg" This spool holder uses the original bayonet fitting "puck" from the CORE One+ spool holder. When this one is printed and assembled, it can easily be…
Spare Gear Shifter Knob (5-Speed) | Peugeot 807, Citroën C8, Fiat Ulysse, Lancia Phedra A replacement gear shifter knob specifically designed for the Eurovan family (Peugeot 807, Citroën C8, Fiat Ulysse, Lancia Phedra) equipped with a…
This is a copy of the hood prop rod clip from my Fiat 500 Abarth. Mopar Part# 68073578AA. Print out of something like ASA, which is semi flexible and can withstand the under-hood temps.
My digital indicator: https://a.co/d/2FFRM4I My spring: https://a.co/d/c3aXYTS My springs for new version: https://a.co/d/e7rfH6a Each digital indicator is differently sized a bit so yours may or may not fit unless you have the same one I…
Due to circumstances I need to run Linux from an nVME in a ICYBOX nVME enclosure. As I sometimes need to carry around the laptop I was looking for something that would let me fix it to the computer. So I designed this in OnShape. Luckily…
Magnet size: OD 15 mm, thickness: < 2.4 mm Just glue a small magnetic disk in the roof with BT's plastic glue (Super good on PLA) Link to the detector: https://www.biltema.no/hjem/sikkerhet-i-hjemmet/brannvarslere/brannvarsler-2000043498
Changes to original: Outer walls width 1.6 mm for 0.4 mm nozzle print Inner wall width 0.8 mm for 0.4 mm nozzle print Solid outer walls Shortened ~5 mm to fit better into Eldricht Horror box Wall width is done inwards in order not to mess…
This is an upgrade for the Makita 18V LTX Lantern, 20 LED bulb variant. This may work on the other variants, but I don't have them to test. If you aren't certain which variant you have, the correct version is green & has a USB port. I use…
I put my Samsung television onto a rolling board. To avoid, that the television falls down, I fixed the stand with these printed parts. Mounted each with 2 screws. Can be printed without support structure. Probably also fits for other…
Replacement rubber wheel for Bernina 807 bobbin thread winding This wheel is smaller in diameter than the original one. The reason for this is: I noticed that the full sized original wheel doesn't fully utilise the "over centre" mechanism…
I added the mount from sj to the case from Rasmussen . So I can use the internal NVMe and another one via the external USB-case together.
Recreation of the plastic mounting hardware for the door of the Whirlpool AFG 8072 Freezer. There are files both with and without custom supports. I testprinted it out of both PLA and PETG. I mounted the PLA one. 0.2 mm layer height. For…
A concern bracket for a rear bumper. Used on Skoda Octavia 1 combi 1999. Pieces are to be glued with superglue, and using soldering iron insert two M6 (10mm) nuts. The replacement is sturdy enough to replace the original. The pieces are…
This is a recreation of the housing for a license plate bulb in 90's hondas. I know it works for at least a 93 del sol. Please print out of ABS so it doesn't melt when using a halogen bulb.
This model is compatible with the lego system.
Update: Added parts for 2kg spools. -"spoolholder_center_2kg" -"spoolholder_tube_2kg" This spool holder uses the original bayonet fitting "puck" from the CORE One+ spool holder. When this one is printed and assembled, it can easily be…
This model is compatible with the lego system.
Hook Compatible with the Ikea Skadis for holding the Bahco 8070 150mm adjustable wrench (spanner)
Volkswagen Passat Golf MK2 Rear bump holder VAG part number 165807193
