Liczymy pasujące modele…
Watch here: https://youtu.be/cv1QyHBbdzw This is my take on a VW Bus model. It's not 100% accurate to any specific year. I was just going for a 1970s-ish VW Bus, and it's missing a few details that would have made it significantly more…
Print a piece of Space History Size : 200mm (diameter) x 2.2mm (66% of the real size) The bottom is a reproduction of the Side 1 of the Voyager Golden Record . The top is a reproduction of the record cover diagram that contains the disc…
Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…
A modular desk caddy / desk organizer / desk storage inpsired by the “1970s HOF desk caddy”. Stylish storage and organization for your office, bedroom or hobby. Designed to require no supports. It includes: - Main cubes with system to…
The body windows have been divided so that no brackets are needed (just under the fenders for better results) The wheel was divided into three concentric parts to facilitate painting. An axle has been added for the wheels so they can…
This is my most complex model so far. It is a print-in-place version of one of the most iconic cars ever, the Porshe 911 from the year 1974. If you have issues printing any of my designs, DM me on Instagram (…
Hey, this is a remix of KYZ-Design's amazing model. It's a Door Hinge which allows you to open a door (for example of an enclosure) 270 Degree. The door hinge consists of 2 Parts. Both of them have counterbores (according to DIN 974-1)…
Gandalf from the Rankin and Bass version of the Hobbit.
This model is compatible with the lego system.
97x71 version of the original project
Remington 597 magazine. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: Doesn't Matter Supports: Yes Resolution: .100 Infill: Your choice, I used 45% honeycomb Filament: Proto Pasta HTPLA CF Black CF Category: Sport &…
Please print this model on the side… At 1:43 you won't see the VW logo but it should look like a GOLF and it has spinning wheels ! It looks nice at 0.2 in PLA with no supports. Fun fact: this car measured only 3.7 m in length and weighed…
Originally published here: Samsung Galaxy Note10 n970 case by tato_713 - Thingiverse These cases were designed only for rigid materials, because the wide range curved borders prevent to make a good attach for the phone, and it will…
This model is compatible with the lego system.
Just a fixed version of https://www.thingiverse.com/thing:40261
Bilbo from the Rankin and Bass version of the Hobbit.
I purchased a used 997.1 this year and found the sound quality severely lacking after upgrading the old aftermarket head unit. Turns out the factory amp (ASK) had failed along with the stock woofers in the front doors. The factory woofers…
This model is compatible with the lego system.
Capture the free-spirited vibe of the 70s with this 3D printable STL model of the 1973 Volkswagen Kombi (Hippie Version). This classic camper van model is perfect for enthusiasts of retro automotive culture and road trip nostalgia,…
I am huge fan of Formula 1 and cars, so I decided to add my model "Formula Tyrell P34 1976 Kid Toy (stronger with function wheels, 1:24)" to the ongoing Toy Cars Prusa Contest. I took and remodeled two original models by rkxone and…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2 (Recommended)
Citroen AK400 scale 1-18 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
A model from a 1970 skyline GTR edited to be used as a body for the open z RC car chassis. Category: R/C Vehicles
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I didn't want to spend $40USD per mount for the netgear wall brackets so I made my own. I printed in prusament PETG with a .6mm nozzle using draft fast settings in prusa slicer. They are beefy as the routers/satelites are quite heavy. YOU…
Citroën 2CV year 1973 Fiat 600 year 1961 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Print a piece of Space History Size : 228.6mm x 152.4mm x 1.4mm (Real Size) The Pioneer plaques are a pair of gold-anodized aluminum plaques that were placed on board the 1972 Pioneer 10 and 1973 Pioneer 11 spacecraft, featuring a…
This is a sweet 1970 Camaro for your Hot Wheels collection. It's an even simpler process to finish this car than my other Hot Wheels models are. My other vehicles have a chassis' that are printed separately and then glued onto the bodies.…
In celebration of the 40th Anniversary of ALIEN. I bring you a 1:1 scale Incinerator Unit Model Kit that I crafted in Fusion 360 resembling the unit from the film. (I have always wanted one!) "I am still improving this kit, so some parts…
Here is a pretty nice '72 Chevy to add to your collection. Printing it is approximately the same procedure as my other Hot wheels models, I printed with a 0.2mm nozzle, but that's because I suck at sanding out the layer lines lol. Use…
This model is compatible with the lego system.
The Church of Jesus Christ LDS Temples. Remixed.
Classic Car from a classic era. Good luck Michael and please upload some pics when you print it, Cheers Jace
This adapter system wraps the edges of a OVV3D 1kg 197x62mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable OVV3D nameplate for…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Drucken und aufsetzen auf die Kamera. Hergestellt für die OV 9732 Blendendurchmesser zum aufsetzen 14,2mm. Am besten in schwarz drucken. Die weiße ist zur besseren Ansicht. Funktioniert aber auch.
1979 Chevrolet Camaro & 1979 Pontiac Firebird — two icons from the same era. Two closely related American muscle cars, reduced to small, clean objects that keep their distinctive shapes and character. The Mini Cars DUO series brings…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses Praktischer Helfer beim Sicherungsziehen bzw. setzen Konturen → 2 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Überall Infill →…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
Pumpklin with removable lid based on the design seen in the 1978 Halloween movie credits. I made this as part of a learning excerise using the Loft & Sweep tools in Fusion360. For use with battery operated lights only - I recommend a…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
About model My custom design of armrest plug for front seats in Volkswagen T4. Made for a friend's Multivan. Compatibility For T4 Multivan / Caravelle / California. Model year: 1996 to 2003. Diameter: 35 mm Modifications I optimised…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Bei einer Freundin hatte ich einen Solarbrunnen im Garten entdeckt. Fand ich ganz nett und hab ihn mit Modifikationen konstruiert und mit einer solarbetriebenen Pumpe versehen. Ich habe diese genommen:…
Zundapp KS50 50cc scale 1:15 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA NB! The rims do not require support
This model is compatible with the lego system.
This model is compatible with the lego system.
Version 1.1 - The rocket storage is now separate from the center card box. NOW UPDATED TO INCLUDE THE EAR CANDY EXPANSION! SEE BELOW FOR DETAILS.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I made a holder/bracket for the 3A0972695(A) VW OBD socket used in most VAG cars. Fusion 360 file included so you can modify it for your needs.
This holds the Wiha 26197 screwdriver set in a 2x5 grid. The models are parametric, so you can easily adjust sizes to fit your needs. I used my remix of PDXCNC's bins, and made a significant rework to the Wiha Screwdriver tray by Physics…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A kit card of one of my favotite models of Corvette the C5 1997-2004 model. It needs some glue on the axles but should have spinnable wheels. I also sell these over on Etsy: https://glacierfrost.etsy.com
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Puch MV50 1974 1x M4 x 70mm stuur fixing electric wire 0.5mm2 1m All axes = PLA 1.75mm Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
LEGO Chevrolet 1970 Chevelle
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Created in Autodesk Maya as my scanner does not work on smaller than 100mm*100mm*100mm
please leave a comment after printing this model, it will help the development of this line of key chains/пожалуйста, оставьте комментарий после печати данной модели, это поможет развитию данной линейки брелоков
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Just a simple switch panel I knocked up to replace the stock one in my 1998 Jeep Cherokee and that a few of my friends now run as well. I designed it to get rid of the 12V socket (lighter) and instead I run a screw in dual USB outlet with…
Great model of an awesome classic! Great conversation starter, and is also a great gift for that VW-loving friend. Comment below if you want to see more models like this!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
UFO from the French film Le Gendarme et les extra-terrestres / The Troops & Aliens / Četník a mimozemšťané (1979). The model is composed of three parts. You can insert an LED candle inside the model or you can use glue to join parts. I…
Lego 4697B (Pneumatic T-Bar)
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Wall Art silhouette model of the 1975 Ford F-250 Highboy pick up truck. Adjustable size. I accept model suggestions.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Cup holder upgrade for my 1997 Honda Civic DX Hatchback. Now fits 20oz tall coffee cups and 1L Nalgene bottles. Unsure what other civic models this might fit, but if I can figure it out, so can you. Make sure to use PETG so it doesn't…
This model is compatible with the lego system.
M-97 Sniper rifle from Mass Effect. I thought the lack of M-97 on thingi was disturbing after the legendary trailer dropped. So, here we go! Should be full scale sized roughly. Let me know if I missed any details or any issues with the…
This is a resized and slightly modified version of one made by Rooski, I've sized it so it's closer to a real one. If you like this and like Reenacting please join my group https://www.thingiverse.com/groups/my-groups Category: Props
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Use the Hart Stack System to bring your Gridfinity bins on the go! These toolbox organizers stack and lock together for easy portability, and they just so happened to fit the Gridfinity dimensions very well, parts don't even spill out…
Use the M4 insert form HSW and a M4x30 swrew *Update 2024.02.29* Adding a model with hex insert after request- Not tested - please feedback
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. - SideSilhouette
Toyota LandCruiser FJ40 1977 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
I recommend printing at the odd angle shown in the attached gcode to manage stresses in the part and reduce overhang issues but YMMV
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Zundapp CS50 yaer 1977 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Puch Maxi-S 1974 - 1976 scale 1:8 Spoke rim only: without support Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 220 Filament material: PLA
printed in PLA with support you must put the wall thickness to maximum to have the right rigidity, otherwise it’s to flex and doesn’t hold the movement correctly
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Hi there! Let me introduce you to the Ford Bronco 1970 , a carefully crafted 3D model designed for those who appreciate detail and quality in their projects. Perfect for uses such as visualization, 3D printing, animation, or simply as…
This engine was carefully designed to be used in 1:24 scale model vehicles, taking care of the greatest number of details.
